LSD for your Mercedes! Quaife and WaveTrac
#78
Former Vendor of MBWorld
Thread Starter
PM's on their way. These are a complete drop in unit and most people have not had to reshim them during installation
#84
Former Vendor of MBWorld
Thread Starter
4 customers with AMG cars hooking up like never before! Can we make it 5 before the end of the month?
#86
Former Vendor of MBWorld
Thread Starter
it's just the fluids, sealant and a couple seals in the install kit.
Shims are not required for installation most the time, however we always recommend that you check the gears before putting everything back together just in case it needs them this one time
Shims are not required for installation most the time, however we always recommend that you check the gears before putting everything back together just in case it needs them this one time
#90
Hi guys,
A question on this.
The shop doing the install is telling me that the WaveTrac LSD is only the diff centre and not the whole diff.
Is this correct or was I sent the wrong part.
I was told by Arsha this was a complete drop in drop out unit.
A question on this.
The shop doing the install is telling me that the WaveTrac LSD is only the diff centre and not the whole diff.
Is this correct or was I sent the wrong part.
I was told by Arsha this was a complete drop in drop out unit.
#91
It's just a centre mate
#92
MBWorld Fanatic!
Join Date: Feb 2010
Posts: 5,517
Received 434 Likes
on
357 Posts
2012 C63;1971 280SE 3.5(Sold);2023 EQS 450 SUV 4 Matic (Wife's)
Ashra meant you can install it without modification to your diff housing and usually without needing to be shimmed. You have to have it installed in your existing diff housing.
#93
Former Vendor of MBWorld
Thread Starter
Responded to your email also, but the case is just as Mort said. I am not sure why your installer is saying they need a heavy duty press.
#99
Former Vendor of MBWorld
Thread Starter
The card was charged less then 24 hours ago, I will get you the tracking number as soon as possible sir!