Wheel Spacers for Our Cars
#102
MBWorld Fanatic!
Join Date: Jan 2013
Location: Toronto, Canada
Posts: 3,720
Received 794 Likes
on
545 Posts
W204 C63 Coupe, W166 ML350 BlueTEC, 928GT, C5 Z06 & IS300 race cars, EQE 4Matic+ on order
Seeing as you're putting on spacers, having someone there to help you out may not be a bad idea as it's somewhat cumbersome to hold the wheel up while you line up the holes on the hub, spacer and wheel at the same time.
#107
MBWorld Fanatic!
Wouldn't hurt to anti seize the bolts, but probably unnecessary. I'm going to slather some on the spacer mating surfaces front and back.
#109
MBWorld Fanatic!
Join Date: Jan 2013
Location: Toronto, Canada
Posts: 3,720
Received 794 Likes
on
545 Posts
W204 C63 Coupe, W166 ML350 BlueTEC, 928GT, C5 Z06 & IS300 race cars, EQE 4Matic+ on order
If you are going to be taking off the spacers, you can put a *little* copper grease ONLY ON THE HUB-CENTRIC flange (but never on the mating surface) of the hub and the spacer itself.
#111
MBWorld Fanatic!
Edit: nvm, google is a pretty good resource. I can see the point. I guess I keep applying racecar principles to a street car that needs more longevity. We would replace parts so frequently on the racecars that I guess these things don't matter as much.
#113
MBWorld Fanatic!
Join Date: Jan 2013
Location: Toronto, Canada
Posts: 3,720
Received 794 Likes
on
545 Posts
W204 C63 Coupe, W166 ML350 BlueTEC, 928GT, C5 Z06 & IS300 race cars, EQE 4Matic+ on order
The lug bolts or studs are supposed to be clean and dry. Regardless of the stories you may have heard about oxidation in winter driving or tire shops doing their own thing, Mercedes specifies that NO lubricant should be applied to the wheel bolts. Anti-seize is a lubricant.
All bolts or studs are designed to stretch a small amount to achieve their optimal clamping load. Applying any kind of lubrication alters the bolt/stud torque vs. stretch ratio, and what you'll be doing is applying too much torque and stretching (effectively weakening) the bolts even with the correct setting on your torque wrench. While some fasteners do call for a wet torque setting (usually when they are meant to be immersed in oil like in your crankcase), the wheel bolts specify a dry torque setting so that's what you should go with unless you're prepared to take the chance of seeing your own wheel overtake you.
All bolts or studs are designed to stretch a small amount to achieve their optimal clamping load. Applying any kind of lubrication alters the bolt/stud torque vs. stretch ratio, and what you'll be doing is applying too much torque and stretching (effectively weakening) the bolts even with the correct setting on your torque wrench. While some fasteners do call for a wet torque setting (usually when they are meant to be immersed in oil like in your crankcase), the wheel bolts specify a dry torque setting so that's what you should go with unless you're prepared to take the chance of seeing your own wheel overtake you.
#115
Junior Member
Join Date: Dec 2013
Location: Chicago
Posts: 37
Received 0 Likes
on
0 Posts
2013 P31 C63, 2012 C63 (RIP)
Hey khmergod, how did this setup end up working out? I am putting my 18" OEM wheels back on and wanted to get spacers as well. I'm on stock suspension now but will likely be going with H&R springs soon. Do you think there is room for 12mm in the rear or does it look nice and flush with 10mm?
#116
Junior Member
Join Date: Dec 2013
Location: Chicago
Posts: 37
Received 0 Likes
on
0 Posts
2013 P31 C63, 2012 C63 (RIP)
I would say go with 15mm front and 10mm rear.
Here is how it looked on my car on H&R springs:
http://imgur.com/a/dKqS2
Here is how it looked on my car on H&R springs:
http://imgur.com/a/dKqS2
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
#117
MBWorld Fanatic!
Thread Starter
Join Date: Sep 2010
Location: Texas
Posts: 2,290
Likes: 0
Received 4 Likes
on
2 Posts
2011 P31 C63 2015 CLA45
Hey khmergod, how did this setup end up working out? I am putting my 18" OEM wheels back on and wanted to get spacers as well. I'm on stock suspension now but will likely be going with H&R springs soon. Do you think there is room for 12mm in the rear or does it look nice and flush with 10mm?
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
![Wheel Spacers for Our Cars-imag0261_zps857735aa.jpg](https://mbworld.org/forums/attachments/c63-amg-w204/403912d1542334079t-wheel-spacers-our-cars-imag0261_zps857735aa.jpg)
Last edited by khmergod; 05-23-2014 at 03:56 PM.
#118
Junior Member
Join Date: Dec 2013
Location: Chicago
Posts: 37
Received 0 Likes
on
0 Posts
2013 P31 C63, 2012 C63 (RIP)
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
#119
MBWorld Fanatic!
Thread Starter
Join Date: Sep 2010
Location: Texas
Posts: 2,290
Likes: 0
Received 4 Likes
on
2 Posts
2011 P31 C63 2015 CLA45
It rarely rubs without passengers, but still may rub. PM me your zip code and I'll check my post office shipping charge to your location and give you a price for the spacers and bolts. It'll be a good deal.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
p.s. i read some of the previous posts. your car would be perfectly fine with stock suspension. many shops will charge you an arm and leg for the spring install. in other words, labor usually costs more than the springs itself. if you do get springs, i suggest getting 27mm spring pads for rear to replace the 24mm. 3mm would make all the difference.
Last edited by khmergod; 05-23-2014 at 07:59 PM.
#120
MBWorld Fanatic!
^^ homie, how can u be rubbing with 10mm spacers in the rear? Are u running wider than the oem 255?
I don't rub at all even with 2-3 passengers in the rear .. And got oem 19's.
P.S oem springs pads are 14mm , thicker pads are 17mm.
I don't rub at all even with 2-3 passengers in the rear .. And got oem 19's.
P.S oem springs pads are 14mm , thicker pads are 17mm.
![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
#122
MBWorld Fanatic!
265 is the cause of ur rubbing with 10mm spacers. I'm on 255 with 10mm & it's perfectly flush w/o rubbing.
#123
Junior Member
Join Date: Dec 2013
Location: Chicago
Posts: 37
Received 0 Likes
on
0 Posts
2013 P31 C63, 2012 C63 (RIP)
My winter set is on right now - 245/40/18 tires on ET35(!) wheels so it sticks out 14mm more than stock. I do rub here and there with passengers/bumps but I'm used to it. Plus I have stock 255 tires on the OEM wheels that are going back on, so I think I will be ok without any rubbing.
#124
Junior Member
Join Date: Dec 2013
Location: Chicago
Posts: 37
Received 0 Likes
on
0 Posts
2013 P31 C63, 2012 C63 (RIP)
For you guys with H&R springs, what do you think is a fair price for the install? Just so I have a point of reference when I eventually do mine.
#125
MBWorld Fanatic!
Thread Starter
Join Date: Sep 2010
Location: Texas
Posts: 2,290
Likes: 0
Received 4 Likes
on
2 Posts
2011 P31 C63 2015 CLA45
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
Cali has really good rates. I got mine done for $450. Some shops will quote you for like ~8 hours. Can be done in less than 2 hours for all 4 corners if they are experienced.