HELP! Lowered with alignment problem
#51
Hoping someone can take a look at my alignment as my car is pulling to the right too after lowering with H&R's:
Front (L/R):
Camber = -2.0/-1.8
Caster = 10.9/11.1
Toe = 0.18/0.17
Rear (L/R):
Camber = -1.8/-1.6
Toe = 0.46/0.35
Looking at the before and after numbers, the rear did not change a single degree, the front on the other hand did..
Thanks in advance
Front (L/R):
Camber = -2.0/-1.8
Caster = 10.9/11.1
Toe = 0.18/0.17
Rear (L/R):
Camber = -1.8/-1.6
Toe = 0.46/0.35
Looking at the before and after numbers, the rear did not change a single degree, the front on the other hand did..
Thanks in advance
#54
MBWorld Fanatic!
id pull the left front camber arm in. That'll give you alittle more pull to the left. right now it should only have a light pull to the right. with that move it'll pull about 2x as much to the left.