FS: HRE P41 19" Forged Monoblock - EUROPE only
#1
MBWorld Fanatic!
Thread Starter
FS: HRE P41 19" Forged Monoblock - EUROPE only
I am selling my beloved and very rare HREs.
This is probably the only set of P41s in Europe.
Shipping only within Europe via UPS.
HRE P41
8.5x19 ET43
9.5x19 ET43
Color: Gloss Charcoal Grey
5x112
66.6mm
One of the wheels needs to be repowdercoated because my tireshop scratched the face of the wheel on the outer lip.
I can have the wheel powdercoated in Gloss Charcoal Grey or powdercoat the whole set in any color you like at my cost.
To avoid many PMs about fitment of the wheels:
1) on stock suspension, you can run 245/35/19 and 265/30/19
2) H&R springs, 235/35/19 and 255/30/19 and 10mm spacer in front
3) Coilovers on max drop 225/35/19 +10mm spacer and 245/30/19 or 235/35/19
I am asking 2800€ + shipping. Payment by bank transfer.
Now the wheels cost 1299€ per wheel at HRE Germany, that is 5196€ for a set of 4 wheels.
I will post pics of the wheels later this week.
Setup on pics:
Front 225/35/19 +10mm spacer
Rear 235/35/19
H&R coils dropped to the max
Attachment 447228
Attachment 447229
Attachment 447230
Attachment 447231
Attachment 447232
Attachment 447233
Attachment 447234
Attachment 447235
Attachment 447236
Attachment 447237
This is probably the only set of P41s in Europe.
Shipping only within Europe via UPS.
HRE P41
8.5x19 ET43
9.5x19 ET43
Color: Gloss Charcoal Grey
5x112
66.6mm
One of the wheels needs to be repowdercoated because my tireshop scratched the face of the wheel on the outer lip.
I can have the wheel powdercoated in Gloss Charcoal Grey or powdercoat the whole set in any color you like at my cost.
To avoid many PMs about fitment of the wheels:
1) on stock suspension, you can run 245/35/19 and 265/30/19
2) H&R springs, 235/35/19 and 255/30/19 and 10mm spacer in front
3) Coilovers on max drop 225/35/19 +10mm spacer and 245/30/19 or 235/35/19
I am asking 2800€ + shipping. Payment by bank transfer.
Now the wheels cost 1299€ per wheel at HRE Germany, that is 5196€ for a set of 4 wheels.
I will post pics of the wheels later this week.
Setup on pics:
Front 225/35/19 +10mm spacer
Rear 235/35/19
H&R coils dropped to the max
Attachment 447228
Attachment 447229
Attachment 447230
Attachment 447231
Attachment 447232
Attachment 447233
Attachment 447234
Attachment 447235
Attachment 447236
Attachment 447237
#3
MBWorld Fanatic!
I think these are far superior to your ADV wheels - they really are a perfit fit for the estate. I'd keep em if I were you for when you're ready to swap back!
#4
Member
#5
MBWorld Fanatic!
NOOO Matt I think you should keep them, really your estate looks beautiful with them.
Trending Topics
#8
MBWorld Fanatic!
Thread Starter
#11
MBWorld Fanatic!
Thread Starter
Thanks Ameet. I have the eBay 4AMotors front lip. It's the most common design among C63s.
#12
MBWorld Fanatic!
Thx Matt. Appreciate it. How was the quality and fitment? Did it use 3m tape or some cheap crap. I recently took my cheap bumper vent carbon pieces off and it was a ***** to get the tape residue off since they used some cheap tape
#14
MBWorld Fanatic!
Thread Starter
So far, many questions and PMs but no serious offers.
Wheels are still available
#15
Super Member
Join Date: Nov 2007
Location: Lone Star State
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
06 CTT-S
hi matt,
any chance u would consider shipping these overseas? just curious how much shipping these would cost? would they (customs) add any other fees?
any chance u would consider shipping these overseas? just curious how much shipping these would cost? would they (customs) add any other fees?
#16
MBWorld Fanatic!
Thread Starter
I would like to get $3700 for the wheels.
Shipping would cost about $500.
On top of that customs and taxes.
#17
Super Member
Join Date: Nov 2007
Location: Lone Star State
Posts: 795
Likes: 0
Received 0 Likes
on
0 Posts
06 CTT-S
#19
MBWorld Fanatic!
Ugly is you getting dick slapped up that brutal mug of yours by every member of your local high school football team. And their janitor. Again. Then having to change out of your drag queen outfit, pop your dentures back in, throw your Osh-B-Gosh coveralls on, and climb into your 1976 Chevy Vega for the long, lonely drive home back to your double wide trailer as you shift from side to side trying to avoid the wet spot that just drained out of you and onto your brand new polyester cow print seat covers, all the while praying that when you get home you'll have enough propane left for you to fire up the stove and deep fry something.
Go sell crazy someplace else. We're all full up here.
Sweet rims Matt. GLWS.
Go sell crazy someplace else. We're all full up here.
Sweet rims Matt. GLWS.
#21
MBWorld Fanatic!
Thread Starter
Ugly is you getting dick slapped up that brutal mug of yours by every member of your local high school football team. And their janitor. Again. Then having to change out of your drag queen outfit, pop your dentures back in, throw your Osh-B-Gosh coveralls on, and climb into your 1976 Chevy Vega for the long, lonely drive home back to your double wide trailer as you shift from side to side trying to avoid the wet spot that just drained out of you and onto your brand new polyester cow print seat covers, all the while praying that when you get home you'll have enough propane left for you to fire up the stove and deep fry something.
Go sell crazy someplace else. We're all full up here.
Sweet rims Matt. GLWS.
Go sell crazy someplace else. We're all full up here.
Sweet rims Matt. GLWS.
thanks !
Andrew, I did two phtoshops - one in grey and one in black. I also lowered the car so you can see how it will look on KW
#22
Member
Join Date: Nov 2013
Location: Amsterdam, The Netherlands
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
C63 AMG 2009, ML63 AMG 2007
Thanks!
I am still confused, which wheels looks perfect to my car.
Because I like concave wheels...
Guys, help me to choose
Matt I am serious, if people honestly like more your wheels than my black concave PD wheels I buy your wheels
I am still confused, which wheels looks perfect to my car.
Because I like concave wheels...
Guys, help me to choose
Matt I am serious, if people honestly like more your wheels than my black concave PD wheels I buy your wheels
#23
MBWorld Fanatic!
Thread Starter
Andrew, as much as I would like to sell you these wheels, I think your project is too aggressive to run these wheels.
They have a very classic design and what you need is wide 20" concave wheels to match your widebody.
Like this:
http://s1.cdn.autoevolution.com/imag...e-wheels_3.png
or
http://s1.cdn.autoevolution.com/imag...1-wheels_7.jpg
They have a very classic design and what you need is wide 20" concave wheels to match your widebody.
Like this:
http://s1.cdn.autoevolution.com/imag...e-wheels_3.png
or
http://s1.cdn.autoevolution.com/imag...1-wheels_7.jpg
Last edited by olszowa12; 01-17-2014 at 05:13 PM.
#24
Member
Join Date: Nov 2013
Location: Amsterdam, The Netherlands
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
C63 AMG 2009, ML63 AMG 2007
Thank you for your honest answer and not thinking about the money…
I think I will wait then if someone comes also with those wheels for a good price, who knows….
I think I will wait then if someone comes also with those wheels for a good price, who knows….