Mode Carbon l HRE Wheels l Eurocharged Canada: Our Project 507 Journal
#1
Former Vendor of MBWorld
Thread Starter
iTrader: (-1)
Join Date: Apr 2012
Location: USA
Posts: 3,204
Received 170 Likes
on
118 Posts
E90 M3, F80 M3, C63 507, F90 M5
Mode Carbon l HRE Wheels l Eurocharged Canada: Our Project 507 Journal
Mode Carbon C63 Project 507
We are proud to present our C63 project build, better known as Project 507. No details were overlooked, so that an ordinary Diamond White 2012 C63 Sedan was transformed into an attention grabber.
This 507-themed build begins with perhaps the most noticeable addition: our Mode Carbon 507 Vented Carbon Fibre Hood. The hood was painted Diamond White to match the body color, with the exception of the Hood Vents being left in exposed carbon fibre for all to admire. Also added to the front end is our Mode Carbon Luftstrom Front Spoiler. The result is an aggressive front fascia, breathing steam out of the carbon nostrils.
Carbon, carbon, & more carbon! Other carbon fibre additions include our complete mirror housing replacements, our Luftstrom Rear Diffuser & Bootlid Spoiler combination. The overall package comes together for a fit & finish worthy of a special AMG.
Let's discuss the stance for a moment. First, we outfitted a set of nothing but the best: HRE Wheels R43 18" in a Satin black finish, wrapped in Michelin Pilot SS rubber. This track-inspired wheel is extremely light, and the difference in unsprung weight is noticeable through the turns, making the car significantly more responsive. The Muller Coilover suspension system gives her that slammed look, allowing her to corner flat by minimizing overall body roll and weight transfer.
POWER! Of course, the power had to be upgraded to give her a bark to match the staggering appearance. First she was tuned with the Eurocharged V5 Tune and fitted with the Eurocharged X-Pipe. The secondary cats and resonater were also deleted, for an exhaust note that will cause you to drain your gas tank again and again with a smile.
It's all in the details! In order to really make this car special, no details could be overlooked or spared. The grille was custom painted gloss black to complete the 507-theme. All chrome on the trim, badges, and door handles were painted gloss black. The brakes were removed and painted red. She was then fitted with the Black Series side badges, also gloss black. The finishing touch is the Edition 507 vinyl stripe to tie it all together.
Credits:
We would live to give a big thank you to all of those that were involved in this build. Bergen Imports did an outstanding job with the custom paint work and installations. The quality of work is truly OEM-grade. Eurocharged Canada was an absolute pleasure to work with, and we cannot stop raving about the quality and performance of their products. We would also like to thank HRE Wheels & AUTOCouture Motoring for the addition of the stunning wheels, and Arsha at Vivid Racing for providing the Muller Coilovers.
PART-OUT!
The following items that you see on the above project car are now for sale. Please inquire for pricing, parts will go fast!
This 507-themed build begins with perhaps the most noticeable addition: our Mode Carbon 507 Vented Carbon Fibre Hood. The hood was painted Diamond White to match the body color, with the exception of the Hood Vents being left in exposed carbon fibre for all to admire. Also added to the front end is our Mode Carbon Luftstrom Front Spoiler. The result is an aggressive front fascia, breathing steam out of the carbon nostrils.
Carbon, carbon, & more carbon! Other carbon fibre additions include our complete mirror housing replacements, our Luftstrom Rear Diffuser & Bootlid Spoiler combination. The overall package comes together for a fit & finish worthy of a special AMG.
Let's discuss the stance for a moment. First, we outfitted a set of nothing but the best: HRE Wheels R43 18" in a Satin black finish, wrapped in Michelin Pilot SS rubber. This track-inspired wheel is extremely light, and the difference in unsprung weight is noticeable through the turns, making the car significantly more responsive. The Muller Coilover suspension system gives her that slammed look, allowing her to corner flat by minimizing overall body roll and weight transfer.
POWER! Of course, the power had to be upgraded to give her a bark to match the staggering appearance. First she was tuned with the Eurocharged V5 Tune and fitted with the Eurocharged X-Pipe. The secondary cats and resonater were also deleted, for an exhaust note that will cause you to drain your gas tank again and again with a smile.
It's all in the details! In order to really make this car special, no details could be overlooked or spared. The grille was custom painted gloss black to complete the 507-theme. All chrome on the trim, badges, and door handles were painted gloss black. The brakes were removed and painted red. She was then fitted with the Black Series side badges, also gloss black. The finishing touch is the Edition 507 vinyl stripe to tie it all together.
Credits:
We would live to give a big thank you to all of those that were involved in this build. Bergen Imports did an outstanding job with the custom paint work and installations. The quality of work is truly OEM-grade. Eurocharged Canada was an absolute pleasure to work with, and we cannot stop raving about the quality and performance of their products. We would also like to thank HRE Wheels & AUTOCouture Motoring for the addition of the stunning wheels, and Arsha at Vivid Racing for providing the Muller Coilovers.
PART-OUT!
The following items that you see on the above project car are now for sale. Please inquire for pricing, parts will go fast!
- Luftstrom Front Spoiler
- Luftstrom Rear Diffuser
- Sedan Bootlid Spoiler
- HRE R43 18" Satin Black with Michelin Pilot SS tires
- Muller Coilover Suspension
- Eurocharged X-Pipe
Photoshoot 1: Overlooking NYC
Photshoot 2: Lightpainting
Photoshoot 3: Eurocharged Canada meet
Photoshoot 4: Edition 507 v F80 M3
#5
MBWorld Fanatic!
Any pics of the x-pipe? What part of the exhaust does it replace? Thanks
Trending Topics
#8
MBWorld Fanatic!
Its a good thing you got that pic at the very end there - cos it immortalizes the LAST time that beemer is ever gonna be in front of those two
Great great stuff.
Great great stuff.
#11
MBWorld Fanatic!
Bad ***. Love the way the car turned out. Attention to detail is where its at.
But thats not fair considering you own a carbon company
That last picture is money, have a high res version of it for a desk top?
But thats not fair considering you own a carbon company
That last picture is money, have a high res version of it for a desk top?
#12
Super Member
Looks nice from the outside. Any chance you could show pictures or a video of them being installed to see how the underside and mounting tabs are made?
#13
Former Vendor of MBWorld
Thread Starter
iTrader: (-1)
Join Date: Apr 2012
Location: USA
Posts: 3,204
Received 170 Likes
on
118 Posts
E90 M3, F80 M3, C63 507, F90 M5
Please feel free to check out our Flickr for all our High-Res photos
Thank you! What would you like to see video of?
#15
MBWorld Fanatic!
Join Date: Apr 2012
Location: Austin, TX
Posts: 1,097
Likes: 0
Received 6 Likes
on
3 Posts
507 SEDAN
The decal on the rear bumper isn't quite right.
Not a bad looking build, but that's not hard to do when you are Mode Carbon!! Just don't know why everyone is trying to "make" a 507.
Not a bad looking build, but that's not hard to do when you are Mode Carbon!! Just don't know why everyone is trying to "make" a 507.
#16
MBWorld Fanatic!
I don't think I got a PM
#17
Former Vendor of MBWorld
Thread Starter
iTrader: (-1)
Join Date: Apr 2012
Location: USA
Posts: 3,204
Received 170 Likes
on
118 Posts
E90 M3, F80 M3, C63 507, F90 M5
Received!
I've only seen 2-3 507's in person and this is the first clone I have seen on the internet! Not really sure what you are talking about
PM on the way
PM on the way