Need help about lower the car.
I just got a set of the oem 507wheels and the HR springs. I am trying to lower it and wider it. Question is that if I lowered it what size of spacers I can use without rubbing? And do I need the new extra long bolts?
Thanks guys, have a great weekend!
Btw, the dealership replaced all my 8 spark plugs to fix my CEL problem last week.
My car is 2014 c63 sedan.
What tires are you planning to use - OEM sizes or wider?
I have f/r 12/10 mm spacers and use 40 mm bolts all around
While the rear is jacked up and rotate the wheel to make sure the bolts don't contact parking brake components, mine didn't, some do, if it does the bolts will need a few mm ground off
Trending Topics
Dealers are 30% or so higher than indies
You are providing the springs correct?
The Best of Mercedes & AMG
You will need 20 bolts in the following size:
1.5xM14 40mm
You can buy H&R spacers together with bolts at Vivid Racing
http://www.vividracing.com/catalog/-p-106782.html
P.S. Check your email
1000$ is ridiculous to install springs & wheels.
No more than 300-400$ for spring install + alignment if necessary.
Tires mounting/balancing on wheels should be around 100$.
Installation with spacers u can DIY, if not at most another 50$ to install on ur car by a shop.
I finally got a deal for total 500 from another body shop. But I am not sure they can do the balancing and alignment, I didn't see any equipments there.
They will help me to get the spacers by overnight shipping. But they are not sure they can get those bolts tomorrow.
I don't want to be a 507, I just like those "Y" wheels

I will post pics when I done.
Now, I got the brand new one
kind of lucky..
Share some details..
They would defi look sick with spacers and springs ! Do post some pics and tell us what spacers did u finally use !
Cheers














