Is redlining OUR C63's bad
#26
Super Member
Join Date: Mar 2011
Posts: 572
Likes: 0
Received 3 Likes
on
3 Posts
'14 C63 507, '11 C300, '96 Cobra, '91 Mr2
The safety mechanisms are there so that your pistons don't become intimately acquainted with your valves or the conrods don't snap and punch holes through the side of your block. It certainly doesn't mean that just because the ECU won't let you destroy the engine by pressing the accelerator pedal too far, revving it near redline is without consequences when it comes to longevity and wear and tear. You are still beating the crap out of the motor.
Thanks for your input, but will get back to flogging car now
#27
MBWorld Fanatic!
I sure hope a car that was designed as essentially a race motor that you can take to the track you can redline. Are we talking about punching the gas pedal and letting it redline through the gears. I think you can do this with any car. If you can't do this with an amg seems crazy to me. Obviously if you do it all the time the guy driving like a grandpa might last longer. But what's the point of having this car if you can't get on the gas a little. I punch it in my wife's glk from time to time on freeway on ramps no problems there.
#28
Senior Member
There is a big difference between redlining & hitting the limiter.
Short answer facts:
* Redlining = okay if engine is in good condition
* Bouncing off the limiter = bad for any engine
Short answer facts:
* Redlining = okay if engine is in good condition
* Bouncing off the limiter = bad for any engine
#29
Senior Member
Agreed. I don't shift until it's almost all the way up there. That's how these motors were designed. Mercedes has been making these same blocks for years and they are pretty good at it. Thats why we've all bought one. My .02