C63 AMG (W204) 2008 - 2015

Weistec headers & exhaust WOW!

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 08-06-2015, 10:30 PM
  #1  
Junior Member
Thread Starter
 
Edition507's Avatar
 
Join Date: Aug 2015
Location: OC
Posts: 59
Received 1 Like on 1 Post
C63 Edition 507
Weistec headers & exhaust WOW!

I recently had the Weistec valve body/TCU upgraded with the Wesitec oil/air separator system to my Edition 507. Though, I did not stop there and decided to go a step further with the Weistec headers and exhaust system. As I did the ECU tune with ROWs and filters previously with Weistec and was very impressed with it! I cannot, but say, I am Extremely Pleased with the work Weistec has done on my 507. The sound is Remarkable to say the least....it truly brings out the real beast in the M156 engine! Unbelievable, far beyond my expectations....I still can't get the smile off my face just thinking about it as I type this out.


And the cold starts....oh don't get me started, the Earth shakes in my subterranean garage! Such a clean, mean sound...simply put- it is vicious!!

The icing on the cake was no doubt the TCU/valve body upgrade! I'm loving how quickly the paddle shifting reacts with the transmission. AWESOME work Weistec- it is a considerable improvement from driving the car now and really accompanies the ECU tune very well!

Thank you so much Weistec for making my Edition 507 a true 507 (or damm close to it) to the wheels all N/A!

Team Weistec!!! We drive the best or nothing! So, when it comes AMG aftermarket- it's Weistec or nothing!

Last edited by Edition507; 08-24-2015 at 10:32 PM. Reason: Adding video clip & signature
Old 08-06-2015, 10:53 PM
  #2  
Member
 
GQsmooth's Avatar
 
Join Date: Aug 2012
Location: Canada
Posts: 100
Likes: 0
Received 1 Like on 1 Post
ML
Videos...or it didn't happen.
Old 08-06-2015, 11:39 PM
  #3  
Junior Member
Thread Starter
 
Edition507's Avatar
 
Join Date: Aug 2015
Location: OC
Posts: 59
Received 1 Like on 1 Post
C63 Edition 507
Just need to find a way to block my plates (for privacy reasons) and will post the vid.....vid still does not do it the full justice it deserves!!

Originally Posted by GQsmooth
Videos...or it didn't happen.
Old 08-06-2015, 11:52 PM
  #4  
Junior Member
 
sheeyo's Avatar
 
Join Date: Jun 2013
Posts: 68
Received 3 Likes on 3 Posts
E63S Wagon
Originally Posted by GQsmooth
Videos...or it didn't happen.
I've seen a video of it. Lawdy lawdy.....

His 507 be like "Vroom! Vroom!"

Really though, it's good stuff
Old 08-07-2015, 01:27 AM
  #5  
MBWorld Fanatic!
 
kb24forlife24's Avatar
 
Join Date: Nov 2012
Location: SoCal
Posts: 1,319
Received 14 Likes on 13 Posts
None for now
Pictures and videos of the Weistec headers/exhaust? Not a lot of people run those headers so I'm curious as to how it sounds. Nice Weistec mods!
Old 08-07-2015, 02:08 AM
  #6  
Member
 
Magno507's Avatar
 
Join Date: Mar 2015
Location: Sydney, Australia.
Posts: 94
Received 1 Like on 1 Post
2017 c63s edition 1 coupe
Pictures/videos please!.. also did you dyno if so what was stock and after?
Old 08-07-2015, 10:44 AM
  #7  
MBWorld Fanatic!
 
I am Jeff's Avatar
 
Join Date: Oct 2009
Location: eNyCe
Posts: 2,286
Received 61 Likes on 52 Posts
Steel Grey Metallic C63!!
Originally Posted by kb24forlife24
Pictures and videos of the Weistec headers/exhaust? Not a lot of people run those headers so I'm curious as to how it sounds. Nice Weistec mods!
WEISTEC HEADERS are just repackaged MBH Headers . Plenty of people have MBH LT header setup. Just search the forums.
Old 08-07-2015, 10:44 AM
  #8  
Junior Member
Thread Starter
 
Edition507's Avatar
 
Join Date: Aug 2015
Location: OC
Posts: 59
Received 1 Like on 1 Post
C63 Edition 507
If you're on the SoCal AMG or SoCal C63 Facebook groups. I have a video already posted in the private group (invite only). I can have any one of the admins add your Facebook profile to anyone of the private groups. Please PM me, I should have the video edit to block my license plate soon for the others on mbworld.org to view and listen to the amazing work Weistec has done to my 507!

Originally Posted by kb24forlife24
Pictures and videos of the Weistec headers/exhaust? Not a lot of people run those headers so I'm curious as to how it sounds. Nice Weistec mods!
Old 08-07-2015, 10:48 AM
  #9  
Junior Member
Thread Starter
 
Edition507's Avatar
 
Join Date: Aug 2015
Location: OC
Posts: 59
Received 1 Like on 1 Post
C63 Edition 507
Doesn't sound the same as MBH's nice try

Originally Posted by I am Jeff
WEISTEC HEADERS are just repackaged MBH Headers . Plenty of people have MBH LT header setup. Just search the forums.
Old 08-07-2015, 10:52 AM
  #10  
MBWorld Fanatic!
 
I am Jeff's Avatar
 
Join Date: Oct 2009
Location: eNyCe
Posts: 2,286
Received 61 Likes on 52 Posts
Steel Grey Metallic C63!!
I have to admit that I was wrong about the weistec headers being the same as the MBH design. I haven't been on the Weistec site in a while. Weistec appears to be using a mid length 4-1 design, while the MBH setup is a tri-y design. I guess they stopped using MBH headers.

Please post up pics and vids of your headers on your car.

Last edited by I am Jeff; 08-07-2015 at 11:23 AM. Reason: I was wrong
Old 08-07-2015, 11:25 AM
  #11  
Member
 
BLKM3's Avatar
 
Join Date: Nov 2004
Location: Puerto Rico
Posts: 171
Received 3 Likes on 3 Posts
G63, SLS Black Series, C63 Blackseries
Edition 507,

Where are you located? I would like to hear your car.
Old 08-07-2015, 11:26 AM
  #12  
Junior Member
Thread Starter
 
Edition507's Avatar
 
Join Date: Aug 2015
Location: OC
Posts: 59
Received 1 Like on 1 Post
C63 Edition 507
Where have you done your research? The Internet?

Originally Posted by I am Jeff
Not really nice try. Just look at your headers and look at what MBH has on their website. They are the same. If you changed any of the rear exhaust sections, that will alter the sound. Do your research junior.
Old 08-07-2015, 11:28 AM
  #13  
Junior Member
Thread Starter
 
Edition507's Avatar
 
Join Date: Aug 2015
Location: OC
Posts: 59
Received 1 Like on 1 Post
C63 Edition 507
I'm in dowtown Huntington Beach- avaliable for most of the day today if you'd like to check out the work Weistec has done

Originally Posted by BLKM3
Edition 507,

Where are you located? I would like to hear your car.
Old 08-07-2015, 03:26 PM
  #14  
Member
 
jpetro10's Avatar
 
Join Date: Apr 2015
Location: MN
Posts: 100
Likes: 0
Received 7 Likes on 5 Posts
C63 AMG Black Series
Aaah, I'd LOVE to see/hear the video of this as these are EXACTLY what I'm thinking of doing to my BS. The only thing I'm concerned about is it being TO loud. Does it drone? Is it obnoxiously loud?

Also on the valve body upgrade, did you notice a diff with that right away? Maaan, I wish I was in socal for a lot of reasons, but I'd LOVE to hear your car in person...you don't make it up to MN...do you? haha. Congrats and nice upgrades!
Old 08-07-2015, 03:47 PM
  #15  
Junior Member
Thread Starter
 
Edition507's Avatar
 
Join Date: Aug 2015
Location: OC
Posts: 59
Received 1 Like on 1 Post
C63 Edition 507
I had the very same concerns prior to doing the upgrades to the headers and exhaust! It is extremely loud on cold starts, but is a clean snap sound that is Godly! When it idles- it slightly louder than the stock headers and exhaust....no where near overbearing, which was one of my biggest fears. I did not want to have it sound like a 60s/70s muscle car when it sat at the light. But, I do enjoy/love the smell of racing fuel in the mornings!!!

Here is a clip:

Yes, on the valve body upgrade/TCU reprogram- almost, if not, a completely different car now imo! Very quick, precise when in manual mode- the guys at got it down right- at least for me and my driving style!!

No, have not been out to Minnesota yet, but I love hockey (Im huge LA Kings fan) and you never know.

Originally Posted by jpetro10
Aaah, I'd LOVE to see/hear the video of this as these are EXACTLY what I'm thinking of doing to my BS. The only thing I'm concerned about is it being TO loud. Does it drone? Is it obnoxiously loud?

Also on the valve body upgrade, did you notice a diff with that right away? Maaan, I wish I was in socal for a lot of reasons, but I'd LOVE to hear your car in person...you don't make it up to MN...do you? haha. Congrats and nice upgrades!
Old 08-07-2015, 03:50 PM
  #16  
Junior Member
Thread Starter
 
Edition507's Avatar
 
Join Date: Aug 2015
Location: OC
Posts: 59
Received 1 Like on 1 Post
C63 Edition 507
Here you go sir:



Originally Posted by I am Jeff
I have to admit that I was wrong about the weistec headers being the same as the MBH design. I haven't been on the Weistec site in a while. Weistec appears to be using a mid length 4-1 design, while the MBH setup is a tri-y design. I guess they stopped using MBH headers.

Please post up pics and vids of your headers on your car.
Old 08-07-2015, 03:51 PM
  #17  
Junior Member
Thread Starter
 
Edition507's Avatar
 
Join Date: Aug 2015
Location: OC
Posts: 59
Received 1 Like on 1 Post
C63 Edition 507
Thank you bro- I had to muster up the free time to crop the original video to block my license plate just I can show you; as I know how you are feeling right now...here is the clip:


The reaction from many and the countless heads turning in just the 1st- 2 1/2 days I've had the mods done is priceless!!!!

Originally Posted by kb24forlife24
Pictures and videos of the Weistec headers/exhaust? Not a lot of people run those headers so I'm curious as to how it sounds. Nice Weistec mods!
Old 08-07-2015, 03:55 PM
  #18  
MBWorld Fanatic!
 
kb24forlife24's Avatar
 
Join Date: Nov 2012
Location: SoCal
Posts: 1,319
Received 14 Likes on 13 Posts
None for now
WHOA. Nice sound!
Old 08-07-2015, 04:38 PM
  #19  
Senior Member
 
odonnks's Avatar
 
Join Date: Jun 2014
Location: North of Pittsburgh PA
Posts: 408
Received 0 Likes on 0 Posts
Ford Truck, 2014 C63 AMG 507
My biggest complaint about the car is the delay time when up shifting using the manual paddles.
The way it is stock is pretty much useless.

OP - any chance you can have a friend vid the manual shifting from the passenger seat ? The vid combined with the sound will tell many including me if we should go with the TCU upgrade.

Doing this would be hugely helpful.

Thank you !
Old 08-07-2015, 04:48 PM
  #20  
Member
 
jpetro10's Avatar
 
Join Date: Apr 2015
Location: MN
Posts: 100
Likes: 0
Received 7 Likes on 5 Posts
C63 AMG Black Series
Originally Posted by Edition507
I had the very same concerns prior to doing the upgrades to the headers and exhaust! It is extremely loud on cold starts, but is a clean snap sound that is Godly! When it idles- it slightly louder than the stock headers and exhaust....no where near overbearing, which was one of my biggest fears. I did not want to have it sound like a 60s/70s muscle car when it sat at the light. But, I do enjoy/love the smell of racing fuel in the mornings!!!

Here is a clip: 507 - YouTube

Yes, on the valve body upgrade/TCU reprogram- almost, if not, a completely different car now imo! Very quick, precise when in manual mode- the guys at got it down right- at least for me and my driving style!!

No, have not been out to Minnesota yet, but I love hockey (Im huge LA Kings fan) and you never know.
Ooooh man, sounds SICK! This was NOT the video I needed to hear/see, lol. I've been debating whether or not to keep my BS stock but I feel it's lacking a little bit in responsiveness and power. I'm going to have to hit up Zach at Weistec...he's been an awesome dude to email with. I'm thinking Exhaust, TCU, ROW boxes and tune and call it a day...until the stage 2 sc, lol.

Thanks again! (ooh, Wild baby!!! Hopefully we don't get shutout by Chi again...fml)
Old 08-07-2015, 04:53 PM
  #21  
Banned
 
Girard@ACGautomotive's Avatar
 
Join Date: Apr 2010
Location: San Diego, CA
Posts: 2,914
Received 7 Likes on 7 Posts
a car
Can't beat long tubes on these cars. Sound insane. Enjoy in good health
Old 08-07-2015, 07:35 PM
  #22  
Junior Member
Thread Starter
 
Edition507's Avatar
 
Join Date: Aug 2015
Location: OC
Posts: 59
Received 1 Like on 1 Post
C63 Edition 507
Thank you bro- Weistec did an amazing job with my 507- can't get enough of it now and that smile is still stuck on my face.

Zach is a great and worked with him and Alex. The entire crew at Weistec are awesome to talk to and you can see in their eyes. That they have the very same passion for our cars (well they also drive our cars as their daily drivers) as we do.

The Weistec ECU tune with valve body upgrade and TCU will bring out the very best of your Black Series. Without jeopardizing the integrity of the masterpiece we have in the M156 engine.

Stage 2 supercharger is extremely tempting after you all their other upgrades...it has my imagination running wild at the moment!!

Originally Posted by jpetro10
Ooooh man, sounds SICK! This was NOT the video I needed to hear/see, lol. I've been debating whether or not to keep my BS stock but I feel it's lacking a little bit in responsiveness and power. I'm going to have to hit up Zach at Weistec...he's been an awesome dude to email with. I'm thinking Exhaust, TCU, ROW boxes and tune and call it a day...until the stage 2 sc, lol.

Thanks again! (ooh, Wild baby!!! Hopefully we don't get shutout by Chi again...fml)
Old 08-07-2015, 07:36 PM
  #23  
Junior Member
Thread Starter
 
Edition507's Avatar
 
Join Date: Aug 2015
Location: OC
Posts: 59
Received 1 Like on 1 Post
C63 Edition 507
Thank you brother!!

Originally Posted by Tal@ACGAutomotive
Can't beat long tubes on these cars. Sound insane. Enjoy in good health
Old 08-07-2015, 09:10 PM
  #24  
MBWorld God!

 
hyperion667's Avatar
 
Join Date: Jul 2010
Location: 39.515509, -111.549668
Posts: 30,572
Received 3,353 Likes on 2,807 Posts
2012 CLS63
frak that was awesome!
Old 08-08-2015, 01:39 AM
  #25  
Junior Member
Thread Starter
 
Edition507's Avatar
 
Join Date: Aug 2015
Location: OC
Posts: 59
Received 1 Like on 1 Post
C63 Edition 507
the pop when you down shift from 5th to 4th is something I have to try and record...truly makes it an exotic muscle car now!! : )

Originally Posted by hyperion667
frak that was awesome!


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Weistec headers & exhaust WOW!



All times are GMT -4. The time now is 12:02 PM.