Trade MBH headers and midpipe for stock parts?
#1
Junior Member
Thread Starter
Trade MBH headers and midpipe for stock parts?
Hello,
I have removed my headers and put the stock manifolds back on. I would like to complete the conversion with the rest of the factory pieces. I already have the rear section. My factory down pipes and mid section are modified and do not bold back on. If you would like to swap the pieces I need for the headers and catless midpipe let me know.
Here is what I need:
- OE downpipes with cats and unmodified
- Mid pipe section with secondary cats and complete with mounting flanges to attach to rear section
Here is what I have to trade:
- MBH headers with dual O2 sensor ports.
- Custom mid pipe that connects headers to factory rear section. All done in 3" stainless and all bolt on. No welding or cutting required.
My parts have only around 10k miles and are in excellent condition. No dings or scrapes. I would like to trade for similar condition and mileage.
I have included a picture for reference. On the left side you can see the factory parts and on the right side are the headers and mid pipe.
Let me know if you are interested and we can try to work out the details. I am located in Maryland and prefer to avoid the cost and hassle of shipping if possible
Regards,
Mike
I have removed my headers and put the stock manifolds back on. I would like to complete the conversion with the rest of the factory pieces. I already have the rear section. My factory down pipes and mid section are modified and do not bold back on. If you would like to swap the pieces I need for the headers and catless midpipe let me know.
Here is what I need:
- OE downpipes with cats and unmodified
- Mid pipe section with secondary cats and complete with mounting flanges to attach to rear section
Here is what I have to trade:
- MBH headers with dual O2 sensor ports.
- Custom mid pipe that connects headers to factory rear section. All done in 3" stainless and all bolt on. No welding or cutting required.
My parts have only around 10k miles and are in excellent condition. No dings or scrapes. I would like to trade for similar condition and mileage.
I have included a picture for reference. On the left side you can see the factory parts and on the right side are the headers and mid pipe.
Let me know if you are interested and we can try to work out the details. I am located in Maryland and prefer to avoid the cost and hassle of shipping if possible
Regards,
Mike
#7
Junior Member
Thread Starter
Thanks for the replies. As soon as I figure out how to send reply messages to each of you from my phone, I will.
Couple generic responses:
I am located in Gaitersburg, MD
I really need all the parts to be factory original.
Regards
Mike
Couple generic responses:
I am located in Gaitersburg, MD
I really need all the parts to be factory original.
Regards
Mike
Trending Topics
#12
Junior Member
Thread Starter
Looks like a got some local interest and am going to work with him to see if we can make a deal. Thanks to the rest of you for your interest. If anything falls through I will repost.
Thanks.
Mike
Thanks.
Mike
#14
Junior Member
Thread Starter
Trying to trade my MBH headers again
Hello,
Trying this again as last deal fell apart...
I have removed my headers and put the stock manifolds back on. I would like to complete the conversion with the rest of the factory pieces. I already have the rear section. My factory down pipes and mid section are modified and do not bold back on. If you would like to swap the pieces I need for the headers and catless midpipe let me know.
Here is what I need:
- OE downpipes with cats and unmodified
- OE Mid pipe section with secondary cats and complete with mounting flanges to attach to rear section
Here is what I have to trade:
- MBH headers with dual O2 sensor ports.
- MBH mid pipe that connects headers to factory rear section. All done in 3" stainless and all bolt on. No welding or cutting required.
My parts have only around 10k miles and are in excellent condition. No dings or scrapes. I would like to trade for similar condition and mileage.
I have included a picture for reference. On the left side you can see the factory parts and on the right side are the headers and mid pipe.
Let me know if you are interested and we can try to work out the details. I am located in Maryland and prefer to avoid the cost and hassle of shipping if possible
Regards,
Mike
Trying this again as last deal fell apart...
I have removed my headers and put the stock manifolds back on. I would like to complete the conversion with the rest of the factory pieces. I already have the rear section. My factory down pipes and mid section are modified and do not bold back on. If you would like to swap the pieces I need for the headers and catless midpipe let me know.
Here is what I need:
- OE downpipes with cats and unmodified
- OE Mid pipe section with secondary cats and complete with mounting flanges to attach to rear section
Here is what I have to trade:
- MBH headers with dual O2 sensor ports.
- MBH mid pipe that connects headers to factory rear section. All done in 3" stainless and all bolt on. No welding or cutting required.
My parts have only around 10k miles and are in excellent condition. No dings or scrapes. I would like to trade for similar condition and mileage.
I have included a picture for reference. On the left side you can see the factory parts and on the right side are the headers and mid pipe.
Let me know if you are interested and we can try to work out the details. I am located in Maryland and prefer to avoid the cost and hassle of shipping if possible
Regards,
Mike
#16
Senior Member
#17
MBWorld Fanatic!
I have 63k on my car and all the stock parts. They are currently installed however. I am located in VA Beach and willing to drive. Please PM if you are interested and let me know what kind of deal you would like to work.
#19
MBWorld Fanatic!
No worries. Good luck!