Phil Chow

Anybody have the part numbers for the typical parts that you should replace when doing an LSD Install?

Thx

I am Jeff

Hey Phil - Just call ACG and ask for James. He sold me my Quaife and install kit.

Mort

Phil, here is what I got from jacky@vividracing.com. You might also want to consider new bearings but I don't have a number for them. I also second James or Tal@acgautomotive.com as they have a complete install kit.

The wavetrac is only the unit itself. You can get new rings and sealings from the dealer. Here is a typical install kit. 2309970346 Mercedes Benz Seal Ring - Interior Flange qty2 003989982010 Mercedes Sealing Compound qty1 For Dif oil, we recommend Motul Synthetic. Jacky

Arjy

Hi Mort. are these two parts plus the oil the only thigns required fora wavetrac install?

thanks

Mort

That is all Jacky recommended when I asked.

computertom

I bought the bearings based on this post: https://mbworld.org/forums/c63-amg-w...ml#post6430177

Mercedes does not list these bearings separately for C63's. Thankfully they are parts bin parts.

Prices online seem to range from a bit over $100 to $135 or so each. I replaced both for mine.

-Tom

Arjy

Yeah, i noticed this post and others mentioning bearings. i've already ordered the seal and rings but the install is not happening for a little while so i can always pick up the bearings later. it would be good to confirm if replacing them is required for install though. it seems not considering Jacky at vidid has supplied diffs to so many members based on their thread here

Girard@ACGautomotive

Hey Phil,

I'll email you the part numbers

speedking

Can I get the diff carrier bearing p/ns too....2010 C63.

dubzAMG

You can find the part numbers in the link computertom posted...3 above yours