W204 C63 FI Headers. End of the year $2190 shipped special!
#251
MBWorld Fanatic!
Comes with straight piping though
#252
Super Member
No I just remembered incorrectly. Will edit post to not spread misinformation. For someone already with a welded H pipe, do I need to cut off part of the headers? Or re-weld an H?
Last edited by NotABaller; 08-01-2017 at 11:02 AM.
#254
Super Member
Looks like I might need to place the resonator back on. Or get a shop to weld another H between the straight pipes on the FI tubes.
or can I just not attach the mid pipes?
Last edited by NotABaller; 08-01-2017 at 06:47 PM.
#255
MBWorld Fanatic!
Join Date: Feb 2010
Posts: 5,492
Received 430 Likes
on
353 Posts
2012 C63;1971 280SE 3.5(Sold);2023 EQS 450 SUV 4 Matic (Wife's)
I would reinstall the resonator unless you want it really loud. Also the resonator is a good point to attach the mids to the stock exhaust. The stock exhaust is smaller diameter than the 3" mids and you have to step down at some point. The resonator is a good point to do it.
#256
Super Member
I would reinstall the resonator unless you want it really loud. Also the resonator is a good point to attach the mids to the stock exhaust. The stock exhaust is smaller diameter than the 3" mids and you have to step down at some point. The resonator is a good point to do it.
#257
MBWorld Fanatic!
Join Date: Feb 2010
Posts: 5,492
Received 430 Likes
on
353 Posts
2012 C63;1971 280SE 3.5(Sold);2023 EQS 450 SUV 4 Matic (Wife's)
I have catted mids with MBH LTHs. They have a short length of straight pipe with a 200 cell race cat right after the LTH. I have a x-pipe in place of the secondary cats that mounts to the resonator. The x-pipe tones it down a notch. Straight pipes could be used in place of the x-pipe and would be slightly louder. The catted pipes can be made as test pipes that are swapped with straight pipe when so desired. I think FI must make their mids in two pieces per side as well.
The following users liked this post:
rexiferp (09-05-2018)
#263
SPONSOR
Thread Starter
Bump! Feel free to message us or visit our website CLICK HERE for more info!
#265
Former Vendor of MBWorld
For literally $285 more you can get the original ones that are 100x better. We make them here in the USA unlike the cheap chinese knockoff garbage. The original as seen in my sig, comes with a no BS (unless you smash it up) lifetime warranty. Not to mention free shipping inside the USA. There is no comparison in the build quality from our header to these knock off ones.
The following users liked this post:
thebug44 (08-22-2019)
#266
Junior Member
For literally $285 more you can get the original ones that are 100x better. We make them here in the USA unlike the cheap chinese knockoff garbage. The original as seen in my sig, comes with a no BS (unless you smash it up) lifetime warranty. Not to mention free shipping inside the USA. There is no comparison in the build quality from our header to these knock off ones.
Isn't the extra $285 only for a set of headers with no mid pipes? Mid pipes are an extra $550 on top of that if I’m remembering correctly. And are a needed piece for functionality. Im also a Canadian customer so buy time you add the shipping and conversion add another 40% to the price usually.
Im not getting into the quality debate especially after autotalents quick response to my original question. Just pointing out that for a budget orientated enthusiast it’s not as simple as throwing $285 on top.
The following 2 users liked this post by BLKSHRK:
NotABaller (08-22-2019),
VictoryRoadPerformance (08-22-2019)
#267
Former Vendor of MBWorld
Isn't the extra $285 only for a set of headers with no mid pipes? Mid pipes are an extra $550 on top of that if I’m remembering correctly. And are a needed piece for functionality. Im also a Canadian customer so buy time you add the shipping and conversion add another 40% to the price usually.
Im not getting into the quality debate especially after autotalents quick response to my original question. Just pointing out that for a budget orientated enthusiast it’s not as simple as throwing $285 on top.
Im not getting into the quality debate especially after autotalents quick response to my original question. Just pointing out that for a budget orientated enthusiast it’s not as simple as throwing $285 on top.
The following users liked this post:
thebug44 (08-22-2019)
#268
Former Vendor of MBWorld
Actually it really is just that type of price difference, You are going to pay conversions on anything purchased in the USA. Shipping to you in Canada is $100. We send along along adapter pipes to mate the headers to the factory system. There is always option to ad a mid-secton or mid-section with Cats or Xpipe at anytime. Try buying individual parts like that from FI, not going to happen. Not to mentions FI's 1 year warranty, that seems to be very suspect if you search around. With us if you run into an issue we alwasy take care of it. Take a look at the FI parts that are literally falling apart.
#270
SPONSOR
Thread Starter
Actually it really is just that type of price difference, You are going to pay conversions on anything purchased in the USA. Shipping to you in Canada is $100. We send along along adapter pipes to mate the headers to the factory system. There is always option to ad a mid-secton or mid-section with Cats or Xpipe at anytime. Try buying individual parts like that from FI, not going to happen. Not to mentions FI's 1 year warranty, that seems to be very suspect if you search around. With us if you run into an issue we alwasy take care of it. Take a look at the FI parts that are literally falling apart.
I love how you post pictures and don't know the story to what you are posting. I can just say this was one of the few cases were a warranty replacement was not necessary but we still got it warrantied for the customer. We have sold over 100 + headers for the W204 chassis with no issues. We have installed countless systems locally on exotics. No issues... We stand behind this product and will always take care of the customer if anything happens. You are just embarrassing yourself here. If your product is as great as you say it is then let the people decide and stop coming across like a child.
#271
Former Vendor of MBWorld
I love how you post pictures and don't know the story to what you are posting. I can just say this was one of the few cases were a warranty replacement was not necessary but we still got it warrantied for the customer. We have sold over 100 + headers for the W204 chassis with no issues. We have installed countless systems locally on exotics. No issues... We stand behind this product and will always take care of the customer if anything happens. You are just embarrassing yourself here. If your product is as great as you say it is then let the people decide and stop coming across like a child.
He could also only find these 2 instances of probably thousands of systems sold.
#272
Former Vendor of MBWorld
I love how you post pictures and don't know the story to what you are posting. I can just say this was one of the few cases were a warranty replacement was not necessary but we still got it warrantied for the customer. We have sold over 100 + headers for the W204 chassis with no issues. We have installed countless systems locally on exotics. No issues... We stand behind this product and will always take care of the customer if anything happens. You are just embarrassing yourself here. If your product is as great as you say it is then let the people decide and stop coming across like a child.
#274
Super Member
None of you guys sell full ceramic coated systems which I've been after (one of you did at one point) so poo poo on all of you lol. A lot of customers including overseas offer these options which customer do want. Listen to the customers! Never liked the fact 1 company always comes in and say "buy from me, I'm the best". If that potential customer was in the market for these type of products he would have done his research already and knows the differences. Let the past customers and install/dyno shops speak for you, the product usually speaks for itself.
The following users liked this post:
Crya (08-22-2019)
#275
Super Member
Sounds like MBH is mad that capitalism is working as intended
If you dont like it, make your product better or cheaper. Theyre just steel tubes, you dont own any patents to them.
If you dont like it, make your product better or cheaper. Theyre just steel tubes, you dont own any patents to them.