For anyone needing splash shields/fender liners/etc...
#1
Super Member
Thread Starter
For anyone needing splash shields/fender liners/etc...
Figured I'd pass this info on as it turned out to be a great win for me....
needed new front front(yes, 2 fronts is correct..the front inner fender liners are 2pc and labeled as front front and front rear) inner fender liners for both front fenders and also the engine splash shield....my originals were shot from when i pushed the engine splash shield back on a parking curb, which pushed the front front inner fender liners on both sides back far enough that when i left the parking lot and came up to speed i could hear that they were riding on each front tire(didnt take but about 200' to burn a hole through each one)....had been putting off replacing them for a while because M-B is proud as HELL of them...found these at www.autopartswarehouse.com
first, they are NOT the same material as OEM, the stock units are very, very rigid(and brittle in my opinion) whereas these are more flexible...the fitment was PERFECT!!! all holes lined up exactly as they should have and all of the indentions for mating with the other panels was spot on as well....all in including shipping I had around $70 total in all 3 panels I got...
needed new front front(yes, 2 fronts is correct..the front inner fender liners are 2pc and labeled as front front and front rear) inner fender liners for both front fenders and also the engine splash shield....my originals were shot from when i pushed the engine splash shield back on a parking curb, which pushed the front front inner fender liners on both sides back far enough that when i left the parking lot and came up to speed i could hear that they were riding on each front tire(didnt take but about 200' to burn a hole through each one)....had been putting off replacing them for a while because M-B is proud as HELL of them...found these at www.autopartswarehouse.com
first, they are NOT the same material as OEM, the stock units are very, very rigid(and brittle in my opinion) whereas these are more flexible...the fitment was PERFECT!!! all holes lined up exactly as they should have and all of the indentions for mating with the other panels was spot on as well....all in including shipping I had around $70 total in all 3 panels I got...
The following 3 users liked this post by jptaylor:
#3
Super Member
Thread Starter
Engine splash shield is $145.00
Fender shields are .......$214.00ea
So as best I can tell the Mercedes price of $573.00 is ROBBERY!!!!!
Fender shields are .......$214.00ea
So as best I can tell the Mercedes price of $573.00 is ROBBERY!!!!!
#5
Super Member
Thread Starter
Numbers matching '66 SS396 factory 4sp....
In front of it is a '69 Z/28 factory 4sp car but original eng/trans combo LONG since gone....T56 6sp behind a 572
In front of it is a '69 Z/28 factory 4sp car but original eng/trans combo LONG since gone....T56 6sp behind a 572
Trending Topics
#8
Super Member
Thread Starter