Potentially a New C63 owner, Question on NA limits
So either you're just trolling, or you're looking for someone to come in and support your dumb ideas. Your answers don't indicate someone who is looking for opinions. Go search for meth and see how many people have used it in the 10yrs this platform has been out. What's relevant in the smaller displacement forced induction world rarely holds true for this platform which is the polar opposite.
But whatever dude, if you're so sure have at it man and let us know how it turns out.
if you actually read my post you would understand that we have terrible gas up here and that’s the whole reason I wanted to use methanol, so I could run a higher octane. But again you don’t really read so there in lies the problem. 😂😂 thank you for saying something of substance instead of just comment trolling
So either you're just trolling, or you're looking for someone to come in and support your dumb ideas. Your answers don't indicate someone who is looking for opinions. Go search for meth and see how many people have used it in the 10yrs this platform has been out. What's relevant in the smaller displacement forced induction world rarely holds true for this platform which is the polar opposite.
But whatever dude, if you're so sure have at it man and let us know how it turns out.
And I actually provided website links from this for him to back up my claims
Meth injection is good for dropping air intake temps.i had it on my e55 and that thing would hit 200 degree air temps in an 80 degree day doing a few wot pulls.
Meth injection helps drop air temps and will do absolutely **** to help your poor gas quality.we have amazing intakes and the factory setup is perfect.
Go log your car and you will see how cold the air us compared to a boosted car.
If you have crap gas invest in mmt based octane boosters but be ready to go through O2 sensors or just run e85 if you have that gas near you.
Now let's jump to the underdrive pulley.i have ran my car on the Dyno over 15 times and done over 30 passes down the 1/4 mile.
Our cars keep making power on the Dyno up to about the 6th pull.its just the nature of our ecus and you will see once you go down the 1/4 mile that the car will keep getting faster and faster with the more passes you do.
That 447whp is right where the car should be with shorty headers and probably did just one run and didn't let the car adapt enough before trying the new pulley.
Meth injection is good for dropping air intake temps.i had it on my e55 and that thing would hit 200 degree air temps in an 80 degree day doing a few wot pulls.
Meth injection helps drop air temps and will do absolutely **** to help your poor gas quality.we have amazing intakes and the factory setup is perfect.
Go log your car and you will see how cold the air us compared to a boosted car.
If you have crap gas invest in mmt based octane boosters but be ready to go through O2 sensors or just run e85 if you have that gas near you.
Now let's jump to the underdrive pulley.i have ran my car on the Dyno over 15 times and done over 30 passes down the 1/4 mile.
Our cars keep making power on the Dyno up to about the 6th pull.its just the nature of our ecus and you will see once you go down the 1/4 mile that the car will keep getting faster and faster with the more passes you do.
That 447whp is right where the car should be with shorty headers and probably did just one run and didn't let the car adapt enough before trying the new pulley.
https://mbworld.org/forums/c63-amg-w...on-63-amg.html
https://mbworld.org/forums/c63-amg-w...on-63-amg.html




The Best of Mercedes & AMG
Last edited by RA81722; Sep 21, 2017 at 09:29 PM.
Not sure what you think you read in there
so yeah...have fun running a 95-100 octane tune on 90 octane with this magic NA meth.
http://www.ebay.com/itm/2009-c63-amg...-/142512951287
http://www.ebay.com/itm/2009-c63-amg...-/142512951287
http://methanolfuels.wpengine.com/fuel-blending/
http://www.sunocoracefuels.com/tech-...hol-and-octane
Or just mix it in the tank for the absolute cheapest option.
http://methanolfuels.wpengine.com/fuel-blending/
http://www.sunocoracefuels.com/tech-...hol-and-octane
Or just mix it in the tank for the absolute cheapest option.
I'm starting to suspect you have an odd number of chromosomes.
Theres more to it but that's the easiest way to get the system running correctly.







