When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Front: 245/35
Rear: 265/30...initially I ran 265/35s but on occasion they would scrub.
***Need to clear this up...this was the setup I was running up to about two months ago. I have since removed the 19” wheels/tires, put the factory 18s back on and sold the car.*** Picked up a 507 but I do miss the 2013.
Hows the ride on the coil overs? Is there a weight reduction vs factory spring and shock combo? Are your coil overs adjustable? Occasionally i feel it would be nice if i could make the ride a little less bone jarring.
I just put the exact same wheels on my 204 coupe. However, I was unable to install the centre caps on the rears because the stock lug bolts are sticking out too much. Did you have to alter them or change them out? Any info detailing that would be great.
Yes they will fit with out spacers especially if running stock 235/255 sizes.
Here are a few phone pics of mine with the stock W205 tires 245/35x19 & 265/35x19.
I was running spacers in the pics 3mm front & 4mm rear but have since removed the front ones and fitted them on the rear.
I had a slight rubbing on front when negotiating a big dip at speed 100kph+ on a country highway.
Otherwise no rubbing at all.
Looks good.
I just put the exact same wheels on my 204 coupe. However, I was unable to install the centre caps on the rears because the stock lug bolts are sticking out too much. Did you have to alter them or change them out? Any info detailing that would be great.
The different seat depth front to rear is because the rear wheel has a shallower boss so lug nut doesn't sit as deep.
You may need to fit lug bolts from the W205 as they may have a shorter head length.
I'm running studs on mine and did have a length problem with my original dome nuts but have since fitted open nuts.
I just put the exact same wheels on my 204 coupe. However, I was unable to install the centre caps on the rears because the stock lug bolts are sticking out too much. Did you have to alter them or change them out? Any info detailing that would be great.
Cheers
Sounds like you might not have oem lug bolts? Mine fit just fine, no issues. Pics?
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
