Bucket Seats arrived
#1
Junior Member
Thread Starter
Bucket Seats arrived
carbon seats with leather custom made, and custom made brackets on oem sliders.
made in italy by a good lotus tuner and carbon parts manufacturer. Took me several months to get them.
#2
MBWorld Fanatic!
Although these seats look cool, they also look uncomfortable with little cushion for your butt.
#6
Trending Topics
#9
Junior Member
Thread Starter
https://www.facebook.com/Eltech.Italia/
here is the link witch many pictures from the manufacturer of the seats.
the rails are from a w204 with manual seats from the junk yard. side mounts and seat holder are from eltech.
the seats are realy comfortable. made from 6 layers of carbon.
on my picture they are ready to install now. I ordered new original seat belt buckles for the front. they should come today.
carbon seat weight 3kgs
black leather paddings 1.6kgs
oem rails,seat holder and side mounts 6.6kgs
I have ordered 3 point version. 5 point is possible but he has to change the seat holder design.
there are 2 typ of same seat. one with polished carbon finished at the back as well, +1.5kgs, more expensive, and the one I have,
with no extra layers on the back. My choice was because its lighter, nobody seats in the back, and originaly my plan was to take the rear seats out.
so I was waiting for about 7 months to get all the parts, custom fabrication. eltech had to organize a w204 to ckeck height and seat position.
now I have an other project and don't know if I will install them.
here is the link witch many pictures from the manufacturer of the seats.
the rails are from a w204 with manual seats from the junk yard. side mounts and seat holder are from eltech.
the seats are realy comfortable. made from 6 layers of carbon.
on my picture they are ready to install now. I ordered new original seat belt buckles for the front. they should come today.
carbon seat weight 3kgs
black leather paddings 1.6kgs
oem rails,seat holder and side mounts 6.6kgs
I have ordered 3 point version. 5 point is possible but he has to change the seat holder design.
there are 2 typ of same seat. one with polished carbon finished at the back as well, +1.5kgs, more expensive, and the one I have,
with no extra layers on the back. My choice was because its lighter, nobody seats in the back, and originaly my plan was to take the rear seats out.
so I was waiting for about 7 months to get all the parts, custom fabrication. eltech had to organize a w204 to ckeck height and seat position.
now I have an other project and don't know if I will install them.
#10
https://www.facebook.com/Eltech.Italia/
here is the link witch many pictures from the manufacturer of the seats.
the rails are from a w204 with manual seats from the junk yard. side mounts and seat holder are from eltech.
the seats are realy comfortable. made from 6 layers of carbon.
on my picture they are ready to install now. I ordered new original seat belt buckles for the front. they should come today.
carbon seat weight 3kgs
black leather paddings 1.6kgs
oem rails,seat holder and side mounts 6.6kgs
I have ordered 3 point version. 5 point is possible but he has to change the seat holder design.
there are 2 typ of same seat. one with polished carbon finished at the back as well, +1.5kgs, more expensive, and the one I have,
with no extra layers on the back. My choice was because its lighter, nobody seats in the back, and originaly my plan was to take the rear seats out.
so I was waiting for about 7 months to get all the parts, custom fabrication. eltech had to organize a w204 to ckeck height and seat position.
now I have an other project and don't know if I will install them.
here is the link witch many pictures from the manufacturer of the seats.
the rails are from a w204 with manual seats from the junk yard. side mounts and seat holder are from eltech.
the seats are realy comfortable. made from 6 layers of carbon.
on my picture they are ready to install now. I ordered new original seat belt buckles for the front. they should come today.
carbon seat weight 3kgs
black leather paddings 1.6kgs
oem rails,seat holder and side mounts 6.6kgs
I have ordered 3 point version. 5 point is possible but he has to change the seat holder design.
there are 2 typ of same seat. one with polished carbon finished at the back as well, +1.5kgs, more expensive, and the one I have,
with no extra layers on the back. My choice was because its lighter, nobody seats in the back, and originaly my plan was to take the rear seats out.
so I was waiting for about 7 months to get all the parts, custom fabrication. eltech had to organize a w204 to ckeck height and seat position.
now I have an other project and don't know if I will install them.
The following users liked this post:
RouteAbel (03-11-2019)
#12
Looks sick