Widebody time
#26
Zeph! I think you and i are the lone silver rangers here now lol. Alot of my friends in Toronto have moved on from the C63 as well. But she's a keeper for me. Im doing the work at European Autobody here in Toronto. They are the only certified Ferrari repair facility here in Toronto. They did the original widening of the rear fenders for me. Im confident in their abilities for sure.
Matt! yes my friend, after such investments into it I don't see the need to change it I only drive it a few months out of the year during summer. Really there aren't many cars that gets my attention, very few newer cars have character. Too much electronics for me.
Matt! yes my friend, after such investments into it I don't see the need to change it I only drive it a few months out of the year during summer. Really there aren't many cars that gets my attention, very few newer cars have character. Too much electronics for me.
I have been here since 2007 Haaa!
Great to see you guys around, although I wasn't as active as you guys but I remember the cars and usernames. This section is nowhere near what it used to be. A lot quieter now. Either everybody moved to the W205 section or different brand.
#27
Zeph! I think you and i are the lone silver rangers here now lol. Alot of my friends in Toronto have moved on from the C63 as well. But she's a keeper for me. Im doing the work at European Autobody here in Toronto. They are the only certified Ferrari repair facility here in Toronto. They did the original widening of the rear fenders for me. Im confident in their abilities for sure.
Matt! yes my friend, after such investments into it I don't see the need to change it I only drive it a few months out of the year during summer. Really there aren't many cars that gets my attention, very few newer cars have character. Too much electronics for me.
Matt! yes my friend, after such investments into it I don't see the need to change it I only drive it a few months out of the year during summer. Really there aren't many cars that gets my attention, very few newer cars have character. Too much electronics for me.
I have been here since 2007 Haaa!
Great to see you guys around, although I wasn't as active as you guys but I remember the cars and usernames. This section is nowhere near what it used to be. A lot quieter now. Either everybody moved to the W205 section or different brand.
The following users liked this post:
Drifter2090 (03-15-2021)
#28
MBWorld Fanatic!
Joined: Nov 2009
Posts: 4,421
Likes: 384
From: Relocated
2010 Irridium Silver MB C63 AMG Sedan
Great to see you too Tasho! It’s great to see OG members still here and continuing to mod and perfect this car. The w204 c63 is truly well rounded, well built and balanced and a savage car from its inception...
#29
#31
Both excellent choices. For the BBS FI-R's what vehicle fitment will you be using? I know that BBS doesn't make the FI-R for the W204 C63 so will you be working with bolt pattern adapters and/or spacers? The FI-R's will be much lighter than the S101 because it is 1-piece vs 3-piece. The 1-piece version of the S101 in essence is the HRE R101 Lightweight which is lighter than the BBS FI-R.
I have not heard nor seen news about these failures. Can you provide us with a link?
#32
Huracan spec fi-r’s will fit the w204 with widened rear fenders.
Believe hub rings are the only thing needed. The fi-r’s aren’t hubcentric if I’m not mistaken.
Believe hub rings are the only thing needed. The fi-r’s aren’t hubcentric if I’m not mistaken.
Both excellent choices. For the BBS FI-R's what vehicle fitment will you be using? I know that BBS doesn't make the FI-R for the W204 C63 so will you be working with bolt pattern adapters and/or spacers? The FI-R's will be much lighter than the S101 because it is 1-piece vs 3-piece. The 1-piece version of the S101 in essence is the HRE R101 Lightweight which is lighter than the BBS FI-R.
I have not heard nor seen news about these failures. Can you provide us with a link?
#34
Zeph! I think you and i are the lone silver rangers here now lol. Alot of my friends in Toronto have moved on from the C63 as well. But she's a keeper for me. Im doing the work at European Autobody here in Toronto. They are the only certified Ferrari repair facility here in Toronto. They did the original widening of the rear fenders for me. Im confident in their abilities for sure.
The following 2 users liked this post by 1Lop2K5C:
Silversun262 (02-06-2021),
ZephyrAMG (02-06-2021)
#35
owner had issues with 2 sets. So far my R101s are fine.
The following users liked this post:
Silversun262 (02-06-2021)
The following 4 users liked this post by Cozy:
#39
What’s up guys, been a while since I posted any of my recent upgrades.
I’ve pulled the trigger on a set of Moshammer flares and will be getting them Installed over the next couple of weeks.
I have already widened the rear (metal pull and repaint) by an inch or so on each side: which allow me to tuck 295’s out back.
ideally I would like to step up to a 325 section width tire out back. For those of you with rear wide bodies, what kind of tire / rim sizes are you using.
I love my current HRE P43S’. But I don’t think they will work with the new wider fenders.
narrowed down rim choices to BBS Fi-R or HRE S101.
I’ve pulled the trigger on a set of Moshammer flares and will be getting them Installed over the next couple of weeks.
I have already widened the rear (metal pull and repaint) by an inch or so on each side: which allow me to tuck 295’s out back.
ideally I would like to step up to a 325 section width tire out back. For those of you with rear wide bodies, what kind of tire / rim sizes are you using.
I love my current HRE P43S’. But I don’t think they will work with the new wider fenders.
narrowed down rim choices to BBS Fi-R or HRE S101.
#41
Tell them Jason sent you, they’ll look after you, worldwide shipping.
#42
They are HPC Dynamics Fender flares for the PFL W204 sedan. A subsidiary of Moshammer Germany. Was hesitant about quality, but the Fiberglass is pretty good compared to some stuff I’ve seen in my modding life.
the car goes under the knife tomorrow guys, been snowing all weekend here. I’m trailering it to the shop
Monday morning.
they said about a week to get it all done.
Will be posting progress shots as they work on it.
the car goes under the knife tomorrow guys, been snowing all weekend here. I’m trailering it to the shop
Monday morning.
they said about a week to get it all done.
Will be posting progress shots as they work on it.
The following users liked this post:
DARRYL D (02-07-2021)
#43
#45
https://www.***********.com/showthre...cked-HRE-rims\
owner had issues with 2 sets. So far my R101s are fine.
owner had issues with 2 sets. So far my R101s are fine.
This doesn't appear to be a working link.
#46
#47
They are HPC Dynamics Fender flares for the PFL W204 sedan. A subsidiary of Moshammer Germany. Was hesitant about quality, but the Fiberglass is pretty good compared to some stuff I’ve seen in my modding life.
the car goes under the knife tomorrow guys, been snowing all weekend here. I’m trailering it to the shop
Monday morning.
they said about a week to get it all done.
Will be posting progress shots as they work on it.
the car goes under the knife tomorrow guys, been snowing all weekend here. I’m trailering it to the shop
Monday morning.
they said about a week to get it all done.
Will be posting progress shots as they work on it.
Did you buy directly or from a distributor? any links please and thank you?
#48
Going in for final form
She’s been delivered to the shop. Lol couldn’t even make it down my driveway with the summers. Was sliding everywhere
Picking up the New wheels this week for mock fitment. Will be going with HRE S101’s for now.
any of you know where I can buy BS fender liners? The dealers here charging 600 bucks including tax Canadian for the pair and they will take 2-3 weeks to come in.
if I can’t find the BS liners...I’m going to rig up something to block off the gap using the stock liners.
Picking up the New wheels this week for mock fitment. Will be going with HRE S101’s for now.
any of you know where I can buy BS fender liners? The dealers here charging 600 bucks including tax Canadian for the pair and they will take 2-3 weeks to come in.
if I can’t find the BS liners...I’m going to rig up something to block off the gap using the stock liners.
The following users liked this post:
ZephyrAMG (02-17-2021)
The following users liked this post:
CyanideRide (02-08-2021)
The following users liked this post:
Arjy (02-17-2021)