Are these long tube headers good?
#1
Junior Member
Thread Starter
Are these long tube headers good?
Link here below, are they any good?
https://www.ebay.com/itm/PLM-Long-Tube-Headers-Mid-Pipes-Fits-MERCEDES-C63-AMG-2008-2011-V8-4-1-W204-/184488439379?mkcid=16&mkevt=1&_trksid=p2349624.m46 890.l49286&mkrid=711-127632-2357-0
https://www.ebay.com/itm/PLM-Long-Tube-Headers-Mid-Pipes-Fits-MERCEDES-C63-AMG-2008-2011-V8-4-1-W204-/184488439379?mkcid=16&mkevt=1&_trksid=p2349624.m46 890.l49286&mkrid=711-127632-2357-0
The following users liked this post:
Cashrolling (04-30-2022)
#4
MBWorld Fanatic!
You just told us you were considering buying a C63 and didn’t have money to do headbolts. Now you are looking at headers….
The following 4 users liked this post by chrisridebike8:
#5
Junior Member
Thread Starter
#6
Junior Member
Thread Starter
I put the downpayment , collecting it on Wednesday. I do have the money to do stuff to it, just didn't want to deal with headbolts right away. But since I'm doing the headbolts as i made up my mind I'm going to put in headers same time, i think it makes the installation a little easier with more space up top.
#7
MBWorld Fanatic!
On that note, congrats! Post pics when you take delivery. A C63 with headers is one of my favorite sounds in the world. And fingers crossed you have good luck with the headbolts.
as far as your original question, no clue.
as far as your original question, no clue.
Trending Topics
#8
MBWorld Fanatic!
Join Date: Jun 2008
Location: Los Angeles
Posts: 8,060
Received 2,836 Likes
on
1,674 Posts
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
Okay
Last edited by BLKROKT; 04-30-2022 at 03:28 PM.
#9
Pm’d
#10
to answer the initial question...any aftermarket headers are better than factory exhaust manifolds. but also, the further away a collector is, the better to reduce back pressure therefore allowing the engine to produce more power. PLM headers have the collector closer to the engine than MBH or ARH headers thus will produce less power than ARH or MBH.
#11
Junior Member
Thread Starter
to answer the initial question...any aftermarket headers are better than factory exhaust manifolds. but also, the further away a collector is, the better to reduce back pressure therefore allowing the engine to produce more power. PLM headers have the collector closer to the engine than MBH or ARH headers thus will produce less power than ARH or MBH.
The following 2 users liked this post by eriic034:
Cashrolling (05-02-2022),
lekoza (05-02-2022)