Valve Cover Gasket Bolts
#1
Junior Member
Thread Starter
Valve Cover Gasket Bolts
So one of the previous owners of my 2009 C63 replaced the driver's side valve cover with the new black plastic cover, but the passenger side is still the aluminum one. I can find the valve cover bolts for the plastic cover but not the original aluminum one, FCP Euro and Rock Auto don't seem to have them. Anyone know a place to get bolts that fit the aluminum one or know if it even matters? I'd rather not buy new valve cover just to fit the stupid one time use bolts. Planning on upgrading the Cam Adjuster phaser plates with the 63 motorsports ones, this is the last thing I need to finish up the material orders.
#2
MBWorld Fanatic!
So one of the previous owners of my 2009 C63 replaced the driver's side valve cover with the new black plastic cover, but the passenger side is still the aluminum one. I can find the valve cover bolts for the plastic cover but not the original aluminum one, FCP Euro and Rock Auto don't seem to have them. Anyone know a place to get bolts that fit the aluminum one or know if it even matters? I'd rather not buy new valve cover just to fit the stupid one time use bolts. Planning on upgrading the Cam Adjuster phaser plates with the 63 motorsports ones, this is the last thing I need to finish up the material orders.
N000000002439 - Google Search
Additional information
Diameter: 6mm
Length: 25mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm
Height (packed): 2cm
Length (packed): 3cm
Volume: 12cm³
Weight: 0,007kg
Width (packed): 2cm
EPC makes no reference to any other bolt, but do reference both plastic and aluminum covers.
Regards,
Joe
The following 2 users liked this post by Valvestud:
AMGSPY (12-08-2023),
DarkMirror (12-08-2023)
#3
Junior Member
Thread Starter
Thanks for the reference. I'm paranoid so I'll have a look at my timing cover bolts and see if they are at least the same torx bolt size as the old valve cover ones.
#4
MBWorld Fanatic!
Join Date: Jan 2013
Location: Toronto, Canada
Posts: 3,718
Received 793 Likes
on
545 Posts
W204 C63 Coupe, W166 ML350 BlueTEC, 928GT, C5 Z06 & IS300 race cars, EQE 4Matic+ on order
Here you go:
N000000002439 - Google Search
Additional information
Diameter: 6mm
Length: 25mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm
Height (packed): 2cm
Length (packed): 3cm
Volume: 12cm³
Weight: 0,007kg
Width (packed): 2cm
EPC makes no reference to any other bolt, but do reference both plastic and aluminum covers.
Regards,
Joe
N000000002439 - Google Search
Additional information
Diameter: 6mm
Length: 25mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm
Height (packed): 2cm
Length (packed): 3cm
Volume: 12cm³
Weight: 0,007kg
Width (packed): 2cm
EPC makes no reference to any other bolt, but do reference both plastic and aluminum covers.
Regards,
Joe
The bolt length and thread pitch between the two bolt variants is indeed the same, but the steel bolts without the integrated sleeves for the PFL metal covers will usually break the FL plastic covers.
Last edited by Diabolis; 12-10-2023 at 01:51 AM.
The following 3 users liked this post by Diabolis: