When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 2019 63s coupe and was going to do the H&R adjustables springs to bring the ride down and the H&R 15 mm spacers for both front and back. I am running factory wheel and tyre setup. Any suggestions if this is a good way to go ? Or is a 15 mm front 12.5mm rear better in anyone’s opinion ? Did anyone go black on their spacers ? Tossing up between colours .. it shouldn’t really matter though?
of my ride.
I have a 2019 63s coupe and was going to do the H&R adjustables springs to bring the ride down and the H&R 15 mm spacers for both front and back. I am running factory wheel and tyre setup. Any suggestions if this is a good way to go ? Or is a 15 mm front 12.5mm rear better in anyone’s opinion ? Did anyone go black on their spacers ? Tossing up between colours .. it shouldn’t really matter though?
of my ride.
We sell a lot of these for your application. 15mm FRONT and 12mm REAR are the most common sizes. Our forged black spacers are in stock. If you wish to order or have questions please PM or email sales@supremepower.com
Thank you!
Last edited by SupremePower; Jun 10, 2020 at 12:59 PM.
We sell a lot of these for your application. 15mm rear and 12mm front are the most common sizes. Our forged black spacers are in stock. If you wish to order or have questions please PM or email sales@supremepower.com
We sell a lot of these for your application. 15mm FRONT and 12mm REAR are the most common sizes. Our forged black spacers are in stock. If you wish to order or have questions please PM or email sales@supremepower.com
Thank you!
hi
Hi- are the 12mm rears bespoke to a c63 or standard hubcentric spacers? Read somewhere about the lip on the hub being longer and limiting what spacers can be fitted?
Thought I'd revive this older thread instead of a new one. I currently have 15mm spacers in the rear and going to go less aggressive down to a 5mm spacer. Can someone confirm the rear oem bolt length? I would think with rear offset at 57mm plus 5mm spacer, I'd need 62mm bolts? Also, looks like some standard bolt offerings are 60mm and 65mm, so is it better to go a couple mm short, or 3mm over?
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
