Introducing Euroteck Racing NEW carbon fiber Edition 1 Coupe diffuser - GROUP BUY?!
#51
Member
The following users liked this post:
BlackC230Coupe (08-06-2017)
#52
I want to get the front diffusor too!! A chance you will be making the front large trim piece in carbon fiber.(the one that surrounds the air intakes)
Last edited by mazyo; 08-06-2017 at 01:24 PM.
#53
Former Vendor of MBWorld
Thread Starter
#54
Former Vendor of MBWorld
Thread Starter
I have to do an official recount, but I think most of the first spots have all been paid for already and if you did not pay yet it will be in the second batch. But I will confirm this tomorrow.
#55
Former Vendor of MBWorld
Thread Starter
Right now it appears about half the people paid and the first batch is spoken for, but don't worry since the second will be done not far after with extra stock. We still need 2 more lucky people!
#58
Former Vendor of MBWorld
Thread Starter
#59
Former Vendor of MBWorld
Thread Starter
Ok NOW its one more!
1. dstvivid
2. CJAMG
3. mras350b2
4. Sanch
5. Blackslk55
6. mazyo
7. NOPDK
8. Slowlane
9. tim999
10.
1. dstvivid
2. CJAMG
3. mras350b2
4. Sanch
5. Blackslk55
6. mazyo
7. NOPDK
8. Slowlane
9. tim999
10.
#60
Super Member
#61
Former Vendor of MBWorld
Thread Starter
#62
I installed the first set and fitment was spot on and easy to do. They quality of the carbon as said before it excellent. My car is the one in the beginning of the thread showing it installed.
#63
Member
Could you please PM me the cost of shipping to the UK. Thanks.
Also are you planning on a front Ed1 front lip spoiler too?
Also are you planning on a front Ed1 front lip spoiler too?
#64
Former Vendor of MBWorld
Thread Starter
#66
Former Vendor of MBWorld
Thread Starter
Well guys! we did it!!!!!!!!!!!!!! THANK YOU to all!
1. dstvivid
2. CJAMG
3. mras350b2
4. Sanch
5. Blackslk55
6. mazyo
7. NOPDK
8. Slowlane
9. tim999
10. Beau Kojima
Close to half the people have already paid and will be getting the first batch by the end of this month.
Our second batch (again with extra stock) will be done in September. I will be posting a link here shortly for those who have not yet paid to make payment, and also, when ordering if you have a special order requirement such as matte finish, different weave, or color carbon fiber you can specify so we make it accordingly.
Once again, thanks to all!
1. dstvivid
2. CJAMG
3. mras350b2
4. Sanch
5. Blackslk55
6. mazyo
7. NOPDK
8. Slowlane
9. tim999
10. Beau Kojima
Close to half the people have already paid and will be getting the first batch by the end of this month.
Our second batch (again with extra stock) will be done in September. I will be posting a link here shortly for those who have not yet paid to make payment, and also, when ordering if you have a special order requirement such as matte finish, different weave, or color carbon fiber you can specify so we make it accordingly.
Once again, thanks to all!
#67
Well guys! we did it!!!!!!!!!!!!!! THANK YOU to all!
1. dstvivid
2. CJAMG
3. mras350b2
4. Sanch
5. Blackslk55
6. mazyo
7. NOPDK
8. Slowlane
9. tim999
10. Beau Kojima
Close to half the people have already paid and will be getting the first batch by the end of this month.
Our second batch (again with extra stock) will be done in September. I will be posting a link here shortly for those who have not yet paid to make payment, and also, when ordering if you have a special order requirement such as matte finish, different weave, or color carbon fiber you can specify so we make it accordingly.
Once again, thanks to all!
1. dstvivid
2. CJAMG
3. mras350b2
4. Sanch
5. Blackslk55
6. mazyo
7. NOPDK
8. Slowlane
9. tim999
10. Beau Kojima
Close to half the people have already paid and will be getting the first batch by the end of this month.
Our second batch (again with extra stock) will be done in September. I will be posting a link here shortly for those who have not yet paid to make payment, and also, when ordering if you have a special order requirement such as matte finish, different weave, or color carbon fiber you can specify so we make it accordingly.
Once again, thanks to all!
#68
Former Vendor of MBWorld
Thread Starter
Ok guys! we are now ready to take the rest of all the orders
To do so please visit the product page here on the website
https://www.euroteckracing.com/produ...-rear-diffuser
Then proceed to add to cart and go to the checkout page, once there on the left side it will say enter promo code, click that, the enter this code or copy and paste it MBWC63CGB then press apply and the group buy price will be obtained.
By now you have selected either gloss or matte finish, if any other special request is needed, please contact me once placing the order.
We are anticipating this second batch to be completed around the middle of September. If anyone has any questions, feel free to PM me or email me neal@etkms.com
To do so please visit the product page here on the website
https://www.euroteckracing.com/produ...-rear-diffuser
Then proceed to add to cart and go to the checkout page, once there on the left side it will say enter promo code, click that, the enter this code or copy and paste it MBWC63CGB then press apply and the group buy price will be obtained.
By now you have selected either gloss or matte finish, if any other special request is needed, please contact me once placing the order.
We are anticipating this second batch to be completed around the middle of September. If anyone has any questions, feel free to PM me or email me neal@etkms.com
#69
Former Vendor of MBWorld
Thread Starter
By "default" all orders are made in the Mercedes OEM carbon and finish which is twill weave gloss finish. On the checkout page you can select gloss or matte, just pick gloss, anyone wanting a custom color carbon or different weave pattern needs to contact me about that for their order, other wise everything is made to match OEM unless specified.
#73
Former Vendor of MBWorld
Thread Starter
Yes, none shipped yet, all if them in the final stage of production (clear coat) for the first batch. We should begin to ship them all next week. This diffuser is a lot of work to make actually, unlike any other diffuser, or hood or basic spoiler that its one part made from a single mould, we have 4 total mould for these parts since it literally is 4 separate pieces. So it winds sup being very time consuming to make just 1 single complete diffuser package. Next week I will post some pics before we ship some out!
#74
Former Vendor of MBWorld
Thread Starter
Hello all,
As you know we were just finishing up the first batch of diffusers to ship by the end of this week. We are located in South Florida and some may have seen in incoming Hurricane Irma storm heading our way. Our facility is very close to an evacuation area. As of today we are securing our facility moving lots of equipment and machinery that is important as well as putting up our hurricane shutters. Then we need to all do this to our homes as well. Unfortunately due to this, nothing is shipping today, and we will be closed the rest of the week. When the storm passes and hopefully our facility is not damaged, we will resume where we left off next week and start shipping the first batch of diffusers then that are nearly completed. If for some reason you cannot wait until next week, please email me directly and I can refund your order. For those who can bare with us and wait until next week, I will be sending you all a free carbon fiber gift for your patience.
Thanks you! And P.S. Mother nature sucks!!!
As you know we were just finishing up the first batch of diffusers to ship by the end of this week. We are located in South Florida and some may have seen in incoming Hurricane Irma storm heading our way. Our facility is very close to an evacuation area. As of today we are securing our facility moving lots of equipment and machinery that is important as well as putting up our hurricane shutters. Then we need to all do this to our homes as well. Unfortunately due to this, nothing is shipping today, and we will be closed the rest of the week. When the storm passes and hopefully our facility is not damaged, we will resume where we left off next week and start shipping the first batch of diffusers then that are nearly completed. If for some reason you cannot wait until next week, please email me directly and I can refund your order. For those who can bare with us and wait until next week, I will be sending you all a free carbon fiber gift for your patience.
Thanks you! And P.S. Mother nature sucks!!!
#75
Member
Join Date: Jun 2017
Posts: 103
Likes: 0
Received 33 Likes
on
21 Posts
2019 AMG G63, Porsche GT4, 1973 Porsche 911 hotrod
Hello all,
As you know we were just finishing up the first batch of diffusers to ship by the end of this week. We are located in South Florida and some may have seen in incoming Hurricane Irma storm heading our way. Our facility is very close to an evacuation area. As of today we are securing our facility moving lots of equipment and machinery that is important as well as putting up our hurricane shutters. Then we need to all do this to our homes as well. Unfortunately due to this, nothing is shipping today, and we will be closed the rest of the week. When the storm passes and hopefully our facility is not damaged, we will resume where we left off next week and start shipping the first batch of diffusers then that are nearly completed. If for some reason you cannot wait until next week, please email me directly and I can refund your order. For those who can bare with us and wait until next week, I will be sending you all a free carbon fiber gift for your patience.
Thanks you! And P.S. Mother nature sucks!!!
As you know we were just finishing up the first batch of diffusers to ship by the end of this week. We are located in South Florida and some may have seen in incoming Hurricane Irma storm heading our way. Our facility is very close to an evacuation area. As of today we are securing our facility moving lots of equipment and machinery that is important as well as putting up our hurricane shutters. Then we need to all do this to our homes as well. Unfortunately due to this, nothing is shipping today, and we will be closed the rest of the week. When the storm passes and hopefully our facility is not damaged, we will resume where we left off next week and start shipping the first batch of diffusers then that are nearly completed. If for some reason you cannot wait until next week, please email me directly and I can refund your order. For those who can bare with us and wait until next week, I will be sending you all a free carbon fiber gift for your patience.
Thanks you! And P.S. Mother nature sucks!!!
Be safe in the storm. I'm in same boat just north of you. Mayhem getting ready down here.