Introducing Euroteck Racing NEW carbon fiber Edition 1 Coupe diffuser - GROUP BUY?!
Member
Joined: Jun 2016
Posts: 238
Likes: 23
From: Florida
2017 C63S Coupe 2018 Ford Raptor 2017 Corvette Z06 2013 Mercedes C63 2012 Mercedes C63 BS
Thread Starter
Former Vendor of MBWorld
Joined: Feb 2002
Posts: 12,403
Likes: 21
From: South Florida
Fast Cars!
Hi Everyone!
I want to apologize for not updating this thread earlier. It has been a hard week for us, due to the Hurricane our facility was without power until Friday when it was finally restored, we have been so behind on all orders we worked until 11pm Friday and also worked Saturday and Sunday (we are usually closed on weekends). Today I been helping out in the warehouse all day getting shipments out and was not at my desk practically the entire day. Good news is the first batch of diffusers is done! Some shipped today and the rest will be shipping tomorrow. Emails will be sent with a tracking # when they leave, so if you were in the first batch and did not get an email today, wait until tomorrow later in the day you will get one sent. The second batch we are working on now, and is probably about 2 weeks more away. We are working as fast as possible!!
I want to thank everyone for their patience, and also thoughts throughout the storm, I do appreciate the comments and emails some have sent. Thank you for that, it is nice to have such caring customers. Besides the power out at our facility it was an obstacle getting in due to all the down tress, everywhere you drove looked like this (a tree down on the road to enter our facility).
I want to apologize for not updating this thread earlier. It has been a hard week for us, due to the Hurricane our facility was without power until Friday when it was finally restored, we have been so behind on all orders we worked until 11pm Friday and also worked Saturday and Sunday (we are usually closed on weekends). Today I been helping out in the warehouse all day getting shipments out and was not at my desk practically the entire day. Good news is the first batch of diffusers is done! Some shipped today and the rest will be shipping tomorrow. Emails will be sent with a tracking # when they leave, so if you were in the first batch and did not get an email today, wait until tomorrow later in the day you will get one sent. The second batch we are working on now, and is probably about 2 weeks more away. We are working as fast as possible!!
I want to thank everyone for their patience, and also thoughts throughout the storm, I do appreciate the comments and emails some have sent. Thank you for that, it is nice to have such caring customers. Besides the power out at our facility it was an obstacle getting in due to all the down tress, everywhere you drove looked like this (a tree down on the road to enter our facility).
MB World Stories
The Best of Mercedes & AMG
6 Mercedes Models That Did NOT Age Well (But Are Somehow Still Cool)
Verdad Gallardo
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
Member
Joined: Jun 2016
Posts: 238
Likes: 23
From: Florida
2017 C63S Coupe 2018 Ford Raptor 2017 Corvette Z06 2013 Mercedes C63 2012 Mercedes C63 BS
Hi Everyone!
I want to apologize for not updating this thread earlier. It has been a hard week for us, due to the Hurricane our facility was without power until Friday when it was finally restored, we have been so behind on all orders we worked until 11pm Friday and also worked Saturday and Sunday (we are usually closed on weekends). Today I been helping out in the warehouse all day getting shipments out and was not at my desk practically the entire day. Good news is the first batch of diffusers is done! Some shipped today and the rest will be shipping tomorrow. Emails will be sent with a tracking # when they leave, so if you were in the first batch and did not get an email today, wait until tomorrow later in the day you will get one sent. The second batch we are working on now, and is probably about 2 weeks more away. We are working as fast as possible!!
I want to thank everyone for their patience, and also thoughts throughout the storm, I do appreciate the comments and emails some have sent. Thank you for that, it is nice to have such caring customers. Besides the power out at our facility it was an obstacle getting in due to all the down tress, everywhere you drove looked like this (a tree down on the road to enter our facility).
I want to apologize for not updating this thread earlier. It has been a hard week for us, due to the Hurricane our facility was without power until Friday when it was finally restored, we have been so behind on all orders we worked until 11pm Friday and also worked Saturday and Sunday (we are usually closed on weekends). Today I been helping out in the warehouse all day getting shipments out and was not at my desk practically the entire day. Good news is the first batch of diffusers is done! Some shipped today and the rest will be shipping tomorrow. Emails will be sent with a tracking # when they leave, so if you were in the first batch and did not get an email today, wait until tomorrow later in the day you will get one sent. The second batch we are working on now, and is probably about 2 weeks more away. We are working as fast as possible!!
I want to thank everyone for their patience, and also thoughts throughout the storm, I do appreciate the comments and emails some have sent. Thank you for that, it is nice to have such caring customers. Besides the power out at our facility it was an obstacle getting in due to all the down tress, everywhere you drove looked like this (a tree down on the road to enter our facility).
MBWorld Fanatic!
Joined: Sep 2015
Posts: 2,137
Likes: 263
From: Sydney
AMG GLC63 E-Performance Edition 1
That picture looks dreadful, hope all is ok.
I had an allocation for the diffuser a while ago and have decided not to go ahead with it. It is a great product but currently need to hold of anymore mods.
If anyone's keen hit up Neal aka BlackC230Coupe - He will allocate this to you.
I had an allocation for the diffuser a while ago and have decided not to go ahead with it. It is a great product but currently need to hold of anymore mods.
If anyone's keen hit up Neal aka BlackC230Coupe - He will allocate this to you.
Member
Joined: Jun 2017
Posts: 103
Likes: 33
2019 AMG G63, Porsche GT4, 1973 Porsche 911 hotrod
Great. Happy you are back up and running. Can't wait to get it installed. Did you include the install directions in box? If not can you send to purchasers via email? Are all of the install screws and hardware in box as well?
Thread Starter
Former Vendor of MBWorld
Joined: Feb 2002
Posts: 12,403
Likes: 21
From: South Florida
Fast Cars!
Thanks again guys, I appreciate the thoughts and understanding. We are boxing up the rest, and more tracking numbers will be emailed by the end of the day.
Thread Starter
Former Vendor of MBWorld
Joined: Feb 2002
Posts: 12,403
Likes: 21
From: South Florida
Fast Cars!
Member
Joined: Jun 2017
Posts: 103
Likes: 33
2019 AMG G63, Porsche GT4, 1973 Porsche 911 hotrod
Diffuser received! Quality looks great. All holes pre-drilled. Instructions and screws included in package. Will install over weekend and post picts once it's on. Instructions seem like it will be relatively easy install. Fingers crossed that all of the tabs line up and that it goes on without fuss. I think this is going to look great.
I am going to do a ceramic coating over the exposed carbon. Can anybody recommend a UV protectant I can reapply every 4-6 weeks to keep carbon from bubbling over time? I picked up some 303 that supposedly does this but do not have experience with that product yet.
I am going to do a ceramic coating over the exposed carbon. Can anybody recommend a UV protectant I can reapply every 4-6 weeks to keep carbon from bubbling over time? I picked up some 303 that supposedly does this but do not have experience with that product yet.
Thread Starter
Former Vendor of MBWorld
Joined: Feb 2002
Posts: 12,403
Likes: 21
From: South Florida
Fast Cars!
Diffuser received! Quality looks great. All holes pre-drilled. Instructions and screws included in package. Will install over weekend and post picts once it's on. Instructions seem like it will be relatively easy install. Fingers crossed that all of the tabs line up and that it goes on without fuss. I think this is going to look great.
I am going to do a ceramic coating over the exposed carbon. Can anybody recommend a UV protectant I can reapply every 4-6 weeks to keep carbon from bubbling over time? I picked up some 303 that supposedly does this but do not have experience with that product yet.
I am going to do a ceramic coating over the exposed carbon. Can anybody recommend a UV protectant I can reapply every 4-6 weeks to keep carbon from bubbling over time? I picked up some 303 that supposedly does this but do not have experience with that product yet.
Member
Joined: Jun 2017
Posts: 103
Likes: 33
2019 AMG G63, Porsche GT4, 1973 Porsche 911 hotrod
Install done
Ceramic coated parts last night and installed today. Trim strip came off reasonably easily with trip tool and some good firm yanks to disengage the clips. All of the diffuser pieces lined up well but the clips in the top of the finned piece did not want to easily engage back into the bumper slots and lock in place. Had to fuss around with that for longer than I liked. I used some black silicone at contact points to bumper and for carbon to carbon areas for some added adhesion in addition to included screws. Part screwed on securely and with stubby driver and short drill bit in my cordless Dremel tool was able to do install without putting on ramps.
Diffuser looks AWESOME on car. Really like how it sets off the back 3/4 view. Some picts below.
Excuse any mess in garage, still cleaning up after hurricane and lots of stuff still needs to be put away and organized.
Diffuser looks AWESOME on car. Really like how it sets off the back 3/4 view. Some picts below.
Excuse any mess in garage, still cleaning up after hurricane and lots of stuff still needs to be put away and organized.
Member
Joined: Jun 2017
Posts: 103
Likes: 33
2019 AMG G63, Porsche GT4, 1973 Porsche 911 hotrod
after install
(if pictures are showing upside down sorry. Can't figure out why doing that. They are right side up on my computer and right side up on preview on site but keep flipping due to some glitch on site. Stand on head to view?)
(if pictures are showing upside down sorry. Can't figure out why doing that. They are right side up on my computer and right side up on preview on site but keep flipping due to some glitch on site. Stand on head to view?)
Member
Joined: Jun 2016
Posts: 238
Likes: 23
From: Florida
2017 C63S Coupe 2018 Ford Raptor 2017 Corvette Z06 2013 Mercedes C63 2012 Mercedes C63 BS
Thread Starter
Former Vendor of MBWorld
Joined: Feb 2002
Posts: 12,403
Likes: 21
From: South Florida
Fast Cars!
Ceramic coated parts last night and installed today. Trim strip came off reasonably easily with trip tool and some good firm yanks to disengage the clips. All of the diffuser pieces lined up well but the clips in the top of the finned piece did not want to easily engage back into the bumper slots and lock in place. Had to fuss around with that for longer than I liked. I used some black silicone at contact points to bumper and for carbon to carbon areas for some added adhesion in addition to included screws. Part screwed on securely and with stubby driver and short drill bit in my cordless Dremel tool was able to do install without putting on ramps.
Diffuser looks AWESOME on car. Really like how it sets off the back 3/4 view. Some picts below.
Excuse any mess in garage, still cleaning up after hurricane and lots of stuff still needs to be put away and organized.
Diffuser looks AWESOME on car. Really like how it sets off the back 3/4 view. Some picts below.
Excuse any mess in garage, still cleaning up after hurricane and lots of stuff still needs to be put away and organized.
Nice Porsche's too! The silicone is unnecessary. The tabs are single layer vs. double layer on the trim part, the real way the part is sating in place is by the 10 screws underneath it, the tabs just line it up. Part is 3D scanned from the OEM edition 1 diffuser which is is held on the same way with the same taps. Silicone can't hurt, but again not needed. Also glad to see you ceramic coated them! great protection! I recommend that!
