STAY AWAY FROM EUROTECK CARBON!!!! QUALITY IS GARBAGE
#1
Thread Starter
Newbie
Joined: Oct 2016
Posts: 9
Likes: 0
From: Miami, FL
2017 Mercedes-AMG C63 S Coupe
STAY AWAY FROM EUROTECK CARBON!!!! QUALITY IS GARBAGE
I have a Euroteck carbon diffuser in the matte carbon finish for my 2017 W205 C63s Coupe. I have had it for approximately 8.5 months at time of writing this. After countless issues with my diffuser I am finally putting Euroteck on blast. STAY AWAY FROM THEIR PRODUCTS.
Some issues I have had with my diffuser:
Please stay away from this company as I wouldn’t want to see any car with this quality garbage on their car. It is a disgrace and was a total WASTE OF MONEY.
I will not respond to comments or questions here, so if you have any, DM me on Instagram @stormtrooperamg
fitment
Some issues I have had with my diffuser:
- Major fitment issues. I had to use multiple zip ties to keep the diffuser “snug” with the bumper. It did NOT line up with the bumper and trim pieces whatsoever and would have been a nightmare for a shop to install if I had not done it myself
- Carbon has micro-cracks. This is not a big deal unless you look close, but I have had micro cracks in the carbon since the day the diffuser was installed. This is an immediate sign of poor quality and has only gotten worse as time progressed. I will include photos of this but it is hard to see in photos.
- Carbon and clear coat is fading and dying. This one is the bad one. It is a less than 9 month old piece of carbon. My car sits in the shade for 80% of the time and the carbon diffuser looks like a piece of junk. Whenever people see my car they think its a joke.
Please stay away from this company as I wouldn’t want to see any car with this quality garbage on their car. It is a disgrace and was a total WASTE OF MONEY.
I will not respond to comments or questions here, so if you have any, DM me on Instagram @stormtrooperamg
fitment
#7
That could be true to some point; but these pieces are not cheap either. they are priced similarly to other products of better quality
The following users liked this post:
hyperion667 (09-24-2018)