tekfoc

ooo ok .
if you were on the east coast there are several really good tuners.

mlax

Hello, I'm on the east coast. What tuners do you recommend?

esworld05

Hey man get out of here that was for me lol. Jk

Yea I'm way far from there maybe 36 hours or so lol.

ModalWorks

We stopped at 6.5krpm due to the dyno we were on (dynapack). The sedan in 5th gear at redline is going pretty fast and we were exceeding the speed capabilities of the dyno. If you look at the dyno though, the OEM to ModalWorks intake deviate more and more with higher RPM, so it definitely has more oomf at higher RPMs. During the road tests we went to redline and felt like it still pulled hard. There might be a sweet spot between 6,500-7,000 for optimal shifting but we haven't done enough testing to give a definitive shift point. The dragy times shown all are shifting at redline to limit driver variability and show hardware to hardware improvements only.

It absolutely helps, and in our opinion is one of the biggest selling points for this design. It removes the OEM choke point and has an organic flow path to optimize mass flow rate into the turbine.

Generally yes, but these intakes really help. Significant horsepower and torque improvement area under the curve correlates to better 60-130 and quarter mile times. The engine doesn't drop off nearly as much as with OEM airboxes.

ModalWorks

We run Velos Designwerks and it has been nothing but stellar. Really simple install and instant performance improvements.

tekfoc

precision tuning in New Jersey has a excellent tuner that specializes on are cars

GLCya63

I'm definitely interested, especially if you're making it fit the GLC63 correctly. Does the pre-order apply to the GLC folks as well, or will that be a separate effort? You may want to start a thread in the GLC forum to grab the attention of the members that may not jump in the C63 section.

8cd03gro

Any update on timing of release?

untamedd

Stage 2 cars are rare so are there any power gains on a stock car? Not that you buy an intake for power but still just curious?

rbohgan

ill have downpipes and renntechs stage 2 in soon... wasnt planning on doing anything more to the car this year tho. wonder what this could help push my dyno numbers to tho...hmm...

ModalWorks

We were originally targeting 3/31, but it looks like we are a bit delayed due to Covid-19. Right now we are tracking towards 4/17 and will update everyone if anything changes.

We do not have numbers on OEM vehicles at this time, but our units should still make gains over stock. Aside from power improvements shown on stage 2 vehicles, our intake greatly improves throttle feel (even more snappy) and sounds fantastic.

Here is a new clip from a short drive today:

sinister.c63s

Assuming you mean Kevin Baldi...He owns his own shop now in Cherry Hill called golabworx...Hes the man though, tuned my 63 and m3

tekfoc

yes

rbohgan

how much would it cost shipped to me here in canada? i wouodl do my po box over border but obviously...i cant go there anytime soon with borders closed lol my postal code is v2p1m1 in chilliwack BC.

my car has renntech stage 2 with downpipes. gimme a discount and ill give you a before and after dyno graph!

Antonio24

Any chance of getting in on the pre-order??

koifysh

I have pure 900 turbo plus catless dp. Is 50whp increase possible? Was thinking of getting the weistec carbon intake but figure it’s too pricey for the minimal increase in power. This is very tempting

ModalWorks

We haven't tested your exact setup, but we don't see why not. Air intake demand will be higher with the 900s, and given our design has a lower pressure drop it should help feed the turbos what they need to make power.

Antonio24

Let me know if I can still get in on the preorder. Would love to

koifysh

i’m in. How do I get on pre order?

DaRuzzian

+1 I tried adding to cart to pre-order but get an error message "we only have 1 available, unable to add to cart"
something like that

8cd03gro

Any pics of the CF tubes yet?

sinister.c63s

I was able to get it to work this afternoon after failing before. Check again!

DaRuzzian

Im gonna keep trying throughout the day, hopefully it works ☹

sinister.c63s

from yesterday...

tobeit

Mhm, running my own company with extensive e-commerce orders I am surprised modalworks e-commerce store has so much trouble just taking orders. Seems a rookie mistake for an online retailer to miss out. So, I don't think trying a lot of times will enable you to order it until Modalworks either updates the qty on hand in their backend tool, or allows pre-orders with extended shipment times. There are other options, but its up to Modalworks to manage and not you trying many times.