Rodor Replacement
#4
take the wheel off
use a little shape like pin size of a toothpick
and knock out the pin and slid out the pad
then after use a 18mm socket and removed the pad housing
use a zip tie and hang it somewhere
after that use a allen wrench and removed the little nut
that hold the rotors spray some wd40 and rotor are out
your done
make sure you have a 12 pk beer
use a little shape like pin size of a toothpick
and knock out the pin and slid out the pad
then after use a 18mm socket and removed the pad housing
use a zip tie and hang it somewhere
after that use a allen wrench and removed the little nut
that hold the rotors spray some wd40 and rotor are out
your done
make sure you have a 12 pk beer
#5
take the wheel off
use a little shape like pin size of a toothpick
and knock out the pin and slid out the pad
then after use a 18mm socket and removed the pad housing
use a zip tie and hang it somewhere
after that use a allen wrench and removed the little nut
that hold the rotors spray some wd40 and rotor are out
your done
make sure you have a 12 pk beer
use a little shape like pin size of a toothpick
and knock out the pin and slid out the pad
then after use a 18mm socket and removed the pad housing
use a zip tie and hang it somewhere
after that use a allen wrench and removed the little nut
that hold the rotors spray some wd40 and rotor are out
your done
make sure you have a 12 pk beer
#6
here listen to this
you know where the pad housing is located right floow the metal
bar and you will see the 18mm there should be 2 one top and one on bottom
#7