SRS warning light
Thread Starter
Junior Member
Joined: May 2016
Posts: 24
Likes: 2
From: Connecticut
2004 CL 600
SRS warning light
I was pulling out of a tight driveway (1mph) my passenger front tire went over the curb (about 4" tall) as I heard the clunk my SRS light went on in the speedometer area of the instrument panel. When I hit the R button it goes away except for a small red SRS (left side) When I restart the car the big red SRS appears. What can be done, how could a bump cause the seat belt restraint system to malfunction? Thanks for any insight. John
Thread Starter
Junior Member
Joined: May 2016
Posts: 24
Likes: 2
From: Connecticut
2004 CL 600
Thanks for the info, is the airbag sensor something I can replace or do I need a mechanic shop. Oddly enough, I've had the car for two and a half years and the only repair is brakes done by a good shop but they don't specialize in MB
MBWorld Fanatic!
Joined: Jan 2008
Posts: 6,151
Likes: 533
Mercedes
airbag sensors should be replaced by a shop because if you touch something wrong you can pop all 8 interior bags and your car will be a total loss . You need to disconnect the battery for at least an hour and must know exactly what to do
MBWorld Fanatic!
Joined: May 2015
Posts: 4,037
Likes: 1,012
From: Miami, FL
2003 CL 600
Have it diagnosed and see what failed, the light being on means there is a code for something that's damaged or not working. Might be simple, might be expensive. Have it scanned with a real SDS system.
