How to program used Keyless go cards
How to program used Keyless go cards
Hello
Sorry for posting again. I just bought my 2003 CL 600 and have multiple issues.
My car did not come with the 2 KG cards and I have now bought two used cards from a scrapped car.
Is it possible in someway to program these for my car with SDS or simular or mayby without?
What I can remember these cards dont come preprogrammed when ordered but must be programmed by dealershop.
I thereby thought it might actually be possible to reuse KG cards for another car.
I have also read the thread about the KG Key upgrade from 2003 to the intergrated keys like in 2004- and that sounds really really cool, but first I really would like it to work with cards. I like the cards.
Pardon my bad english
David in Sweden
Sorry for posting again. I just bought my 2003 CL 600 and have multiple issues.
My car did not come with the 2 KG cards and I have now bought two used cards from a scrapped car.
Is it possible in someway to program these for my car with SDS or simular or mayby without?
What I can remember these cards dont come preprogrammed when ordered but must be programmed by dealershop.
I thereby thought it might actually be possible to reuse KG cards for another car.
I have also read the thread about the KG Key upgrade from 2003 to the intergrated keys like in 2004- and that sounds really really cool, but first I really would like it to work with cards. I like the cards.
Pardon my bad english
David in Sweden
Unfortunately I dont have the original KG cards and can thereby not read data or resolder any chips.
I will examine this a little further this weekend, but if I understand right for now there is no known way to reprogram a used KG card?
Thank you once again.
Thank you. Most interesting thread.
Unfortunately I dont have the original KG cards and can thereby not read data or resolder any chips.
I will examine this a little further this weekend, but if I understand right for now there is no known way to reprogram a used KG card?
Thank you once again.
Unfortunately I dont have the original KG cards and can thereby not read data or resolder any chips.
I will examine this a little further this weekend, but if I understand right for now there is no known way to reprogram a used KG card?
Thank you once again.
not that I have seen no
just swap the keyless go module and move to keyless go on key
the keyless go module does not contain the security
the Eis does
only solution would be to buy a Eis + cards + shifter + engine ecu
but then you will have the wrong VIN showing up in diagnostics
I have som KG issues with drivers door and gearknob that dont react. Maybe bad resistor inside.
Only passenger door and trunk react at all and react with "chipcard not recognized".
I will although try some programming this weekend with the used KG cards.
Thank you for clearing this all out.
/David
Last edited by a54067; Jul 15, 2020 at 09:21 AM. Reason: Misspelling
Trending Topics
Banned
Joined: Jan 2006
Posts: 1,982
Likes: 393
From: Atlanta, unfortunately
'09 S600, (2) R129 300SLs, '03 SL500, '03 SL55
In Xentry you have plenty of pages to verify antennas and reception
Ok, but then I have to consider the upgrade instead. It seems really cool.
I have som KG issues with drivers door and gearknob that dont react. Maybe bad resistor inside.
Only passenger door and trunk react at all and react with "chipcard not recognized".
I will although try some programming this weekend with the used KG cards.
Thank you for clearing this all out.
/David
I have som KG issues with drivers door and gearknob that dont react. Maybe bad resistor inside.
Only passenger door and trunk react at all and react with "chipcard not recognized".
I will although try some programming this weekend with the used KG cards.
Thank you for clearing this all out.
/David
I also can confirm that this case is closed as for now.


