Wheel fitment help - aggressive offsets
#1
Member
Thread Starter
Join Date: Jul 2009
Location: Dallas, TX
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
'08 CL63 AMG
Wheel fitment help - aggressive offsets
Ive tried searching around, but haven't really found what i'm looking for.
I'm looking to purchase some new wheels for my '08 CL63 AMG.
Most specs ive found on CL series are running 20-22"x9.0 +32 20-22"x10.5 +42 which seems like a pretty conservative setup.
I'm looking to run something a little more aggressive on my car as far was the wheel fitment is concerned. I'm looking for a perfectly flush fitment, nothing crazy like wheel poke/camber etc... just something that sits flush. Something along these lines:
![](http://www.adv1wheels.com/blog/wp-content/uploads/2012/04/2012_9.jpg)
![](http://www.adv1wheels.com/blog/wp-content/uploads/2012/04/2012_1.jpg)
I believe this car is running 22x9.5 and 22x11.5 -- Just unsure of the offets. Looks like a minor tire stretch with a 295 in the rear on an 11.5" wheel.
Just curious to see if there are any other CL owners out there that like this look and could share some right size/offset specs.
I'm looking to purchase some new wheels for my '08 CL63 AMG.
Most specs ive found on CL series are running 20-22"x9.0 +32 20-22"x10.5 +42 which seems like a pretty conservative setup.
I'm looking to run something a little more aggressive on my car as far was the wheel fitment is concerned. I'm looking for a perfectly flush fitment, nothing crazy like wheel poke/camber etc... just something that sits flush. Something along these lines:
![](http://www.adv1wheels.com/blog/wp-content/uploads/2012/04/2012_9.jpg)
![](http://www.adv1wheels.com/blog/wp-content/uploads/2012/04/2012_1.jpg)
I believe this car is running 22x9.5 and 22x11.5 -- Just unsure of the offets. Looks like a minor tire stretch with a 295 in the rear on an 11.5" wheel.
Just curious to see if there are any other CL owners out there that like this look and could share some right size/offset specs.
#4
Junior Member
#6
Member
Hahaha, I use to have a G too and was always on G-driver as well! I'm working on aggressive fitment with my ls460, but like you said, there is very minimal information for the w216's. My CL is COMPLETELY bone stock and I have yet to figure out what I want to do with it...keep us updated on what you find out and decide to do though!
Trending Topics
#10
Member