azerila14

a problem with "Night View Assistant" on my 2007 CL550 is when I activate it at night it gives me an error message on the dashboard saying " Night View Assistant is Not Available". it is not permanent and sometimes it activates and works perfectly. works completely randomly. I used Foxwell diagnosing tool to read the code and it describes the code as " No connection to the component 'B84/2 (Night View Assist Camera)'.



Has anyone had the same problem or knows how to fix this?

Thank you

07CL550Benz

Did you check the connection point between the camera and the cable? Might just be loose.

azerila14

Thanks for your reply,

Have not checked on that yet.
Is there any instruction or video that shows where should I look for this connection?

Thanks for your help.

07CL550Benz

The Night View camera is at the top of the windshield. Carefully pry off the cover and the plug is at the rear of it. Just make sure the cord is pushed in all the way. Then carefully put the cover back on.

azerila14

Thank you, I'll do it in the morning and share the results.

Appreciate your help.

07CL550Benz

Yeah no problem, good luck.

azerila14

Actually tried it now. the thing is I could not remove the roof cover to get to behind the connector but tried a little and played with it and it started working.

Thanks for your help.

Best,
Alireza

AndreNY

nice one of my favorite features of the W216 ... especially when you drive somewhere where lighting is poor