lowering 2003 cl 55
#26
Almost a Member!
Join Date: Feb 2009
Location: LA$ VEGA$
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
SL500
#28
Member
Join Date: May 2008
Location: Calgary,Alberta, Canada.
Posts: 90
Likes: 0
Received 1 Like
on
1 Post
2003 CL500
Here they are
Front wheel lowering link
![](http://i594.photobucket.com/albums/tt24/brokenstunter/HPIM0870.jpg)
Rear wheel lowering link
![](http://i594.photobucket.com/albums/tt24/brokenstunter/HPIM0871.jpg)
Rear lowering link
![](http://i594.photobucket.com/albums/tt24/brokenstunter/HPIM0877.jpg)
Factory front link
![](http://i594.photobucket.com/albums/tt24/brokenstunter/HPIM0878.jpg)
Front wheel lowering link
![](http://i594.photobucket.com/albums/tt24/brokenstunter/HPIM0869.jpg)
Lowering links installed with ABC fully raised
![](http://i594.photobucket.com/albums/tt24/brokenstunter/HPIM0868.jpg)
Lowering links installed with ABC fully lowered, 2.5' drop from factory is where I set mine. I can go all the way to the ground with the few turns of a couple 10mm wrench's.
![](http://i594.photobucket.com/albums/tt24/brokenstunter/HPIM0867.jpg)
It will rub oh so slightly if the ABC is fully lowered and your over the speed that the car lowers itself. I just lift up the car with the ABC and never had any problems yet. My car is just a cruiser so I never go fast anyway so this suits my needs perfect.
Front wheel lowering link
![](http://i594.photobucket.com/albums/tt24/brokenstunter/HPIM0870.jpg)
Rear wheel lowering link
![](http://i594.photobucket.com/albums/tt24/brokenstunter/HPIM0871.jpg)
Rear lowering link
![](http://i594.photobucket.com/albums/tt24/brokenstunter/HPIM0877.jpg)
Factory front link
![](http://i594.photobucket.com/albums/tt24/brokenstunter/HPIM0878.jpg)
Front wheel lowering link
![](http://i594.photobucket.com/albums/tt24/brokenstunter/HPIM0869.jpg)
Lowering links installed with ABC fully raised
![](http://i594.photobucket.com/albums/tt24/brokenstunter/HPIM0868.jpg)
Lowering links installed with ABC fully lowered, 2.5' drop from factory is where I set mine. I can go all the way to the ground with the few turns of a couple 10mm wrench's.
![](http://i594.photobucket.com/albums/tt24/brokenstunter/HPIM0867.jpg)
It will rub oh so slightly if the ABC is fully lowered and your over the speed that the car lowers itself. I just lift up the car with the ABC and never had any problems yet. My car is just a cruiser so I never go fast anyway so this suits my needs perfect.
#30
Super Member
Join Date: Aug 2007
Location: Boston
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
CLK63 BS
At first I had links, but I wanted to go lower with the ability to adjust the height whenever I wanted. Now I have a RENNtech module w/ controller on top of my links. The module also controls the auto-lowering at high speeds. I would recommend a module for a decent drop with high adjustability.
#31
Member
Join Date: May 2008
Location: Calgary,Alberta, Canada.
Posts: 90
Likes: 0
Received 1 Like
on
1 Post
2003 CL500
Thats next on the list but I had to get the static hieght where I wanted it first because the module doesnt go low enough on its own.
I didnt know that the Renntech also controled the auto lowering as well. Thats pimp.
Cant wait to lay this ***** down over the new wheels with the Renntech.
I didnt know that the Renntech also controled the auto lowering as well. Thats pimp.
Cant wait to lay this ***** down over the new wheels with the Renntech.
#35
#36
Junior Member
Join Date: Sep 2009
Location: Silicon Valley, CA
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
2003 CL, 2008 SL 500, 2007 BMW, 2005 Prius
allot of people say the rear are adjustable from factory, but when I look at my 05 S55 and 03 CL both look pretty much like the front rods?
nothing to adjust, front washers are easy how about the rear's any pics or advice would be appreciated.
Thanks...
nothing to adjust, front washers are easy how about the rear's any pics or advice would be appreciated.
Thanks...
#37
just ordered 20' wheels for CL65 (w215) with 285 / 30 , and also ordered lowering links. Planning to lower it 1 or 1.5 inch , Will it rub or any problems with this set up ?
#38
Member
Join Date: Dec 2009
Location: Smithville, Missouri
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
2003 CL55
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#39
finally got the wheels from symbolic cv15 20x10 with 285/30 and rubbs after lowering it 1 inch. sent it back to make it 20x9.5 with same tires and hopefully solve the problem.. any offset and tire recommendations ? flat look from fender, not to stick out or sucked in from fender