Methenol injection on the way!!!!
#3
Member
Thread Starter
Join Date: Dec 2009
Location: Bay area
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
CL55
cooler is the way to go
two seperate lines one directly tapped in supercharger for maximun cold air forced in the manifold, kit promises cooler temps by at least 130 degrees + 30-50 additional horses
#5
MBWorld Fanatic!
Would be more
like 80hp and no way is a kit other then Nos fog going to drop intake temps 130fthe engine is already intercooled and dropping it 130f more is like a k/n air filter adding horsepower
but hey your money and engine.
but hey your money and engine.
Last edited by ohlord; 09-27-2010 at 12:17 AM.
#6
Member
Thread Starter
Join Date: Dec 2009
Location: Bay area
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
CL55
Stock intercooler not enough!! Do your research!! That's the sell bigger intercoolers and bigger intercooler pumps!!! Because the stock can not handle all the heat after 5 runs!!!! Specially with a modded motor!!! I definitely recommend a cooling system!!! And yes it does reduce tem by at least 130 degrees!!! I did run N. O .S!!!!
#7
Member
Thread Starter
Join Date: Dec 2009
Location: Bay area
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
CL55
And it's not 80 hp it's more like 25-30 hp with methenol, if that was the case? Why do you think evosport (world's fastest CL) is focusing on the bigger cooling system? Do your research.
Trending Topics
#8
Senior Member
Join Date: Nov 2006
Location: SoCal
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
1992 300CE
Yeah i'd agree with this. If meth were 80hp at that price, alot more cars would have it.
#9
PLATINUM SPONSOR
My car is not an Evosport car.. You must be talking about my Cl55 and just mixed the name up...
__________________
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
#12
Member
Join Date: Feb 2007
Location: DC area
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
2003 S600, 1988 RX-7 single turbo vert, 1998 BMW 740IL
I have a sprayer on my rx7. I just run denaturated alcohol from home depot because it was cheap alt to race gas. Good luck bro and post the results.