FS: AMG 17" Thin Spoke, Machined Lip, Rims with Goodyear F1's




The tires were mounted by a factory dealer (Knauz) using factory weights. That alone cost $300. Tires have less 2,000 miles from a C240.
$1,250 (a bargain compared to eBay listings). I'll help with shipping.
most places will do mount & balance for free... or $15 a wheel at max....
The tires were mounted by a factory dealer (Knauz) using factory weights. That alone cost $300. Tires have less 2,000 miles from a C240.
$1,250 (a bargain compared to eBay listings). I'll help with shipping.
a premium made wheel should require almost no weights... imperfections in the wheel and/or tire will require weights to balance it off...
so, to say that you had to pay $300 for weights, how much weights are we talking? couple pounds per wheel?




I've experienced tire mounting and balancing by the 30min. in and out tire shops. Acceptable work for a Yugo.
Did I overpay? That depends - the Michelins were removed, the rims were scrubbed clean to remove any debris, the Goodyears were mounted on a MB factory authorized mounting and balancing machine approved for AMG rims. The rims were not scored in any fashion - the tires do not lose air.
Weights are not just weights - look carefully at IAM vs. OES wheel weights - you'll see a difference.
Are the wheels priced fair? - I'd say they are considering eBay has them for considerably more money.
Trending Topics
I've experienced tire mounting and balancing by the 30min. in and out tire shops. Acceptable work for a Yugo.
Did I overpay? That depends - the Michelins were removed, the rims were scrubbed clean to remove any debris, the Goodyears were mounted on a MB factory authorized mounting and balancing machine approved for AMG rims. The rims were not scored in any fashion - the tires do not lose air.
Weights are not just weights - look carefully at IAM vs. OES wheel weights - you'll see a difference.
Are the wheels priced fair? - I'd say they are considering eBay has them for considerably more money.
The Best of Mercedes & AMG
I am have considered, for some time, getting a used balancer and doing the work myself. I know of several people on the forums that do this.



