CarLAB Motorsports - V3 HID System
#26
Senior Member
Thread Starter
Join Date: May 2006
Location: www.carlabms.com Santa Clara, CA
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
I have your V2 and my passenger light is flashing when i drive down the road. It started out as flicker, then a quick flash, no constantly turn off for a few second them back on and then often times it just flashes like the effect of a car bumping their system draining the battery. Check you PM. I need you guys to look @ it.
Come on by tommorow. Its been a while since i installed the HID kit on your car. It might be a bad ballast. It still under warranty so its all good.
Regards
Darwin W
#30
Senior Member
Thread Starter
Join Date: May 2006
Location: www.carlabms.com Santa Clara, CA
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
#31
Senior Member
Thread Starter
Join Date: May 2006
Location: www.carlabms.com Santa Clara, CA
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
#33
Senior Member
Thread Starter
Join Date: May 2006
Location: www.carlabms.com Santa Clara, CA
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
#36
hey darwin I just got the kit but have a lot of questions about the install. Can you have someone post specific pics about the install
Where do you plug the 2 metal plugs into that come out of the ballast(red plug and wire)
This is for a 211
Thanks
david
Where do you plug the 2 metal plugs into that come out of the ballast(red plug and wire)
This is for a 211
Thanks
david
Last edited by Mad TKD; 01-11-2007 at 04:22 PM.
#38
Super Member
Join Date: Nov 2006
Location: Miami,FL.
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
2017 Charger Hellcat
Darwin, I recieved the new igniters on thursday and had them installed on friday, so far everything is in working order and they look really nice thanks, Miguel
#40
MBWorld Fanatic!
a D2R bulb, not an H7, if used in a reflector headlight. but as far as I know,
all the bulbs in your kit are the same...but the bases are different. so can
you clarify? do the bulbs differ if used in a reflector housing vs a projector
housing?....and if so are the bulbs different if used within an HID projector
versus a halogen projector?
side note: Osram and Phillips designs different bulbs for projector vs reflector
because the focal point is different....and because the light housing requires
different source/beam specifications.
#41
Member
Join Date: Nov 2001
Location: Boston, MA
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
2004 E500 4Matic
Raymond, H1, H3, H4, 9004/5/6 and D2R are designed for reflectors, H7, H11, and D2S are designed for projectors. HID bulbs that have a molded base are designed to be cost effective in any situation.
#44
MBWorld Fanatic!
Join Date: Jul 2005
Posts: 1,313
Likes: 0
Received 0 Likes
on
0 Posts
A box on 4 wheels