Front strut tie bars
Thread Starter
MBWorld Fanatic!
Joined: Apr 2005
Posts: 1,775
Likes: 7
From: Los Angeles
CLK W208
Front strut tie bars
Hey everyone, it is finally about to be completed, the front bar is in the testing stages and should be ready within the next two weeks. as i mentioned before thy will also be limited productions too. I will only produce 25 of the them and first dibs goes to the friends that bought the rear bars, there are still 4 more rear bars available you can read more about the rear bars in the attached link. please put in your orders to make sure you get yours reserved. 
P.S William707 and sick430 the first two have your names on them so don't worry i have your guys's reserved i will fill you in on the pricing for them.
https://mbworld.org/forums/clk-class...t-tie-bar.html
P.S William707 and sick430 the first two have your names on them so don't worry i have your guys's reserved i will fill you in on the pricing for them.
https://mbworld.org/forums/clk-class...t-tie-bar.html
Senior Member
Joined: Jul 2008
Posts: 373
Likes: 1
From: Nagoya, Japan
'15 C200 AMG line, '08 C300 Sport Avantgarde, '07 Jeep Grand Cherokee Ltd, '02 CLK 200 (gone)
I'm looking forward to this. Could you please PM me with info re. pricing? I really want one, but money's a bit tight right now. I need to know how much I need to squirrel away...
Thanks,
Kent
Thanks,
Kent
MBWorld Fanatic!
Joined: Mar 2007
Posts: 1,305
Likes: 50
From: Yokohama, Japan
2000 CLK 320
Hey everyone, it is finally about to be completed, the front bar is in the testing stages and should be ready within the next two weeks. as i mentioned before thy will also be limited productions too. I will only produce 25 of the them and first dibs goes to the friends that bought the rear bars, there are still 4 more rear bars available you can read more about the rear bars in the attached link. please put in your orders to make sure you get yours reserved.
P.S William707 and sick430 the first two have your names on them so don't worry i have your guys's reserved i will fill you in on the pricing for them.
https://mbworld.org/forums/clk-class...t-tie-bar.html
P.S William707 and sick430 the first two have your names on them so don't worry i have your guys's reserved i will fill you in on the pricing for them.
https://mbworld.org/forums/clk-class...t-tie-bar.html
Thread Starter
MBWorld Fanatic!
Joined: Apr 2005
Posts: 1,775
Likes: 7
From: Los Angeles
CLK W208
Senior Member
Joined: Nov 2005
Posts: 257
Likes: 0
From: Singapore
2000 Kleemann CLK 230K
I'm very keen. But I wonder whether the strut position is the same for my engine bay as my car has a 4 cylinder engine.
If it can fit, I'm 4th in line.
Possible to show a pic of the bar installed VIP?
If it can fit, I'm 4th in line.
Possible to show a pic of the bar installed VIP?
Trending Topics
MB World Stories
The Best of Mercedes & AMG
New Electric Mercedes-AMG GT 4-Door Coupe Unveiled: 10 Things You Need to Know
Verdad Gallardo
6 Mercedes Models That Did NOT Age Well (But Are Somehow Still Cool)
Verdad Gallardo
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Thread Starter
MBWorld Fanatic!
Joined: Apr 2005
Posts: 1,775
Likes: 7
From: Los Angeles
CLK W208
hey everyone, it's not ready yet, it will hopefully be complete next week. as for the instalation goes, it doesn;t require anything except cussting a little piece of the rubber that gores around the top of the firewall that covers the brake and ecu and stuff it's a 3 mintue job other than that there is no reloacting the throttle sensor or anything like that and that's why it's taking so long because i have to bypass that, i'm just not a fan of moving factory designed parts around. it will be installed just like the rear one to the strut towers just like the rear one but in the front. i will post pictures once it's done and i'm ready to accept payments.
Senior Member
Joined: Jul 2008
Posts: 373
Likes: 1
From: Nagoya, Japan
'15 C200 AMG line, '08 C300 Sport Avantgarde, '07 Jeep Grand Cherokee Ltd, '02 CLK 200 (gone)
I'm still interested, but would like to see a pic and a price. 
I'm a little concerned about cutting the rubber bit...
I'm a little concerned about cutting the rubber bit...
Thread Starter
MBWorld Fanatic!
Joined: Apr 2005
Posts: 1,775
Likes: 7
From: Los Angeles
CLK W208
The bar is not complete yet, that's why I haven't posted pictures yet or price. I have to find out my final cost before pricing them. As for the rubber piece, its the one that is on top of the secondary fire wall and it can be cut with a knife, it has to be cut in order for the bar to clear the hood, cutting the rubber creates no problems ir issues you can even completly poip it out and you won't have any problems it is just there to hide the edge of the aluminum that's all, no function or anything.
Senior Member
Joined: Jul 2008
Posts: 373
Likes: 1
From: Nagoya, Japan
'15 C200 AMG line, '08 C300 Sport Avantgarde, '07 Jeep Grand Cherokee Ltd, '02 CLK 200 (gone)
Okay, thanks for the quick reply. I am not interested in rushing you, just didn't want to be shoved off the list if you got a lot of potential orders. 
Thread Starter
MBWorld Fanatic!
Joined: Apr 2005
Posts: 1,775
Likes: 7
From: Los Angeles
CLK W208
no problem brother, you are already on the list, because you bought the rear one. i'm the man of my word yours is safe and has your name on it so are the friends that bought the rear one.
Thread Starter
MBWorld Fanatic!
Joined: Apr 2005
Posts: 1,775
Likes: 7
From: Los Angeles
CLK W208
I'm actually glad you left this message, my blackberry took a crap so i had to change it out for another one and i lost some of my numbers because they didn't transfer over. text me with your number i do need another test fit but it won't be for about another week or so, i had to modify it a little more.
MBWorld Fanatic!
Joined: Feb 2003
Posts: 5,622
Likes: 1
From: Los Angeles, Ca
Sean's Sister--
on my way home i stopped by last night and checked out what ash was doing....the front bar looks nice and it requires very minimal modifications...I was very impressed.
Super Member
Joined: Jan 2008
Posts: 623
Likes: 0
From: Virginia Beach,VA
2002 clk430
Weichers is the company I was originally going to try and get it from but even this w209 guy says there is cutting and relocating.
https://mbworld.org/forums/clk-class...wer-brace.html
btw vipclk320 I was just saying that youur product is good because your making it for your car with quality then duplicating it
https://mbworld.org/forums/clk-class...wer-brace.html
btw vipclk320 I was just saying that youur product is good because your making it for your car with quality then duplicating it
Last edited by vizionclk430; Nov 27, 2009 at 08:54 PM. Reason: forgot to add link
Thread Starter
MBWorld Fanatic!
Joined: Apr 2005
Posts: 1,775
Likes: 7
From: Los Angeles
CLK W208
The bar is ready and will be available for purchase next week and i will post some picture up. Just a note, there is no drilling involved at all only minor reloacting that will take about 2 minutes ans a number 10 wrench. other than that it is way different that the bars that are in the market and the adjustability adds to the it as well. instalation time is about 15 minutes and much easier than the rear one. so if you think the rear one was easy to install this you can probably do with your eyes closed. and that is my goals, product being user friendly.
i will start taking orders on tuesday once the pictures are up.
i will start taking orders on tuesday once the pictures are up.
MBWorld Fanatic!
Joined: Mar 2007
Posts: 1,305
Likes: 50
From: Yokohama, Japan
2000 CLK 320
You know My Tuesday is your Monday so can I still have them on my Tuesday. lol
U should be MBworld Exclusive Member
Just in time. I will have my Front Strut, Front&Rear H&R Sway Bars installed that will also compliment my Rear Strut bar.
I'm wondering what it will feel like in corners and how fast can I push it around corners. My heart is beating.
U should be MBworld Exclusive Member
Just in time. I will have my Front Strut, Front&Rear H&R Sway Bars installed that will also compliment my Rear Strut bar.
I'm wondering what it will feel like in corners and how fast can I push it around corners. My heart is beating.
Last edited by Williams707; Nov 27, 2009 at 05:45 PM.
MBWorld Fanatic!
Joined: Feb 2003
Posts: 5,622
Likes: 1
From: Los Angeles, Ca
Sean's Sister--
Weichers is the company I was originally going to try and get it from but even this w209 guy says there is cutting and relocating.
https://mbworld.org/forums/clk-class...wer-brace.html
btw vipclk320 I was just saying that youur product is good because your making it for your car with quality then duplicating it
https://mbworld.org/forums/clk-class...wer-brace.html
btw vipclk320 I was just saying that youur product is good because your making it for your car with quality then duplicating it
you need to relocate couple items but there's no cutting and anyone can do it, which is the great thing......it look's great...can't wait to get a benz one day so i can get some products like this on...
ash aka Dr. auto as i call him have been doing some side projects on my ride and his as well...the guy has some crazy talent but his ride's going to look sick when it's done and i'll post up some pics of my project when were done soon
Thread Starter
MBWorld Fanatic!
Joined: Apr 2005
Posts: 1,775
Likes: 7
From: Los Angeles
CLK W208
