Looking for replacement window seal for 99 CLK Cabrio
I've been looking all around for a replacement seal for the drivers side window for a 99 CLK Cabrio and I have had no luck. It's the rubber seal that is on the rear side window that the drivers window then touches.
Does anyone know of a source for these?
Has anyone replaced one before? How difficult is it?
See the pic if my explaination does not make sense.
I bought the car last fall. Haven't had any problems until yesterday when we (Chicago) got hit by 7 inches of rain and the car was outside. Got some soaking on seat and floor.
I would greatly appreciate any help.
Thanks,
Steve




If you mean the crank shaft position sensor (a.k.a. CPS), replacement is just disconnecting the connector and removing 1 screw. It's a very common problem and if you use the forum search feature, you'll find plenty of DIY replacement information.
If you mean the crank shaft position sensor (a.k.a. CPS), replacement is just disconnecting the connector and removing 1 screw. It's a very common problem and if you use the forum search feature, you'll find plenty of DIY replacement information.
Trending Topics




http://www.mbpartsworld.com/p/Merced...086700139.html
http://www.ecstuning.com/ES1743999/
Last edited by Serndipity; May 23, 2015 at 09:49 AM.
The Best of Mercedes & AMG



