w208 wheel offset
10-04-2015 | 11:03 AM
#1
Thread Starter
Junior Member
Joined: Jun 2015
Posts: 21
Likes: 0
From: Maryland USA
02 W208 CLK55 Cabriolet, 2000 W163 ML55
w208 wheel offset
Hi this is my second post on mbworld and I'd just like to say its been really helpful. I have a 2002 clk430 and I'm in the market for new rims. I was wondering if I could fit 19x8.5(f) 19x9.5 (b) boath with a 45mm offset
Last edited by M4dMax; 10-04-2015 at 12:01 PM.
10-05-2015 | 01:27 AM
#3
SPONSOR/MBworld Guru
Joined: Jul 2010
Posts: 6,936
Likes: 212
From: California
MB W204/W212, BMW E66, Porsche 958, VW MK6 TDI, Maserati Ghibli SQ4
Welcome to MBWorld.
Those offsets are too high... ideally you want low to mid 30s for your w208 depending on how aggressive you want your fitment.
Those offsets are too high... ideally you want low to mid 30s for your w208 depending on how aggressive you want your fitment.
10-22-2015 | 12:00 PM
#5
MBWorld Fanatic!
Joined: Dec 2011
Posts: 1,270
Likes: 125
From: Orlando, FL
2015 GL550 4matic
My 19's fit perfectly, here are the specs. Offset depends on width.
Model : MRR RW2
Size : 19X8.5 & 19X9.5
Bolt pattern : 5x112
Offset : 32MM (F) & 35MM (R)
Hub Bore : 66.6mm
Lip Size : 2" (F) & 2.5" (R)
Finish : SILVER CHROME LIP
Model : MRR RW2
Size : 19X8.5 & 19X9.5
Bolt pattern : 5x112
Offset : 32MM (F) & 35MM (R)
Hub Bore : 66.6mm
Lip Size : 2" (F) & 2.5" (R)
Finish : SILVER CHROME LIP
The following users liked this post:
Andreina Diaz (09-01-2019)
08-29-2019 | 06:11 PM
#6
Member
Joined: Jan 2019
Posts: 83
Likes: 8
From: Toronto, Ontario
2002 CLK 320
I know this is an older post but do you have pics of your setup?
Trending Topics
08-29-2019 | 07:32 PM
#8
MBWorld Fanatic!
Joined: Oct 2015
Posts: 1,899
Likes: 277
From: Merkville the galaxy of Stars
'99 CLK/05 E500 WAG
08-30-2019 | 09:13 AM
#9
MBWorld Fanatic!
Joined: Dec 2011
Posts: 1,270
Likes: 125
From: Orlando, FL
2015 GL550 4matic
Here is a link that I've had saved for quite a while, it's very helpful. It will compare your current specs to what you want to buy, then tell you how the appearance and clearance will differ:
http://www.rimsntires.com/specspro.jsp
http://www.rimsntires.com/specspro.jsp
