Silver Turn Signal Bulbs
I was looking thru ebay and I found these silver bulbs that are supposed to replace the stock turn signal bulbs in the headlamps
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2461858124
I thought there was a yellow reflector in the headlamps and that changing the bulb would not make a difference
Please advise and as always thanks for all of the comments!
-Bruce
The OSRAM bulb looks bluish/rainbow when not illuminated, and this will be noticable inside the blinker housing. If you prefer this to clear, than I would say go for it. But remember that it is not a clear bulb.
Thanks,
Ben
Trending Topics
I sprayed all of my orange bulbs and it turned out great. Make sure you get a good can of paint that will work well with moderately high heat. Also, tape off a little section around the bulb before you spray them so you leave a little orange in it. That will help to prevent a ticket and if you tape a thin line around the circumference of the bulb, it gives it a nice "angel eye" type of flash when you have the turn signal on.
yeah, just make sure the paint is high temp paint...
The Best of Mercedes & AMG
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2463079424
I just did not trust my artistic talents on this one
Ted
just wanted to add that, the silver spray paint should be heat paint. If it is not heat paint this is why it smokes.. Been there done that. If you use heat paint, you can get 500 such bulbs from one spray can and they work perfectly. No artistic talent whatsoever is crequired. Just point the spray can at the buld and spray circumferentially. The paint does not even need to be even. works perfectly. I habe bought the pre-maid siver vision bulbs and they never specify where the prongs are. wated like $100 bucks buying different ones. Depending om whether or not the bulbs are to be used in the rea or the front, the prongs will need to be either across or offset. The base will have either two contavt points or one. They never tell you which one they are selling. Caused error blinking in my CLK. Solved the problem by buying the correct yellow bulb locally and spray painting it with heat paint. Again, works perfectly!
Ted
Glen



