Resetting The Service Signal on 1999
#1
Resetting The Service Signal on 1999
can anyone tell me how to reset the service signal light on a clk430..1999... i change the oil myself and i still get the SERVICE DUE NOW light which is driving me crazy.... i don't have the manual to read it... so if anyone kind enough can post it i;ll be really gratefull.. thanx
#2
thats easy alls you have to do is turn the car on and then turn the wheel all the way to the left and then all the way to the right and do this several times and shut it off that should work
Last edited by lou430; 03-18-2004 at 08:45 PM.
#5
that's the thing.. i don't have the manual for mi car.. i need someone to post the procedures on how to due it.. also last night i got the bas/esp lights on with the abs.. what u guys think do i gotta change the sensors...and which sensors
#6
Senior Member
Join Date: May 2003
Location: FLUSHING, NY
Posts: 452
Likes: 0
Received 2 Likes
on
2 Posts
2006 E350
That is the probably the parking switch. It's some switch in your car that sends information to your brake lights. I had the same thing happen and I took it to the dealer. It cost about $125 total for the switch and to replace it.
Trending Topics
#8
Super Member
Join Date: Dec 2002
Location: Iowa
Posts: 512
Received 0 Likes
on
0 Posts
'11 S550 4Matic, '12 SL63 AMG, '13 ML350, '16 AMG GT-S Ed. 1,'03 Ford F-250
Ok this is the fourth time I've tried sending a reply
1. Turn key steering position 2 (just prior to the spring loaded "start" position)
2. Within 4 seconds press the "O" button twice
3. Within 10 seconds turn key to steering position 0 - off
4. Press and hold "O" button WHILE returning key to position 2 and continue to hold "O" button.
5. After 10 seconds your display should return to normal! (Release button)
Hope this helps...and goes through!
2. Within 4 seconds press the "O" button twice
3. Within 10 seconds turn key to steering position 0 - off
4. Press and hold "O" button WHILE returning key to position 2 and continue to hold "O" button.
5. After 10 seconds your display should return to normal! (Release button)
Hope this helps...and goes through!