Moven SC1's on the CLK550
#4
MBWorld Fanatic!
Join Date: Nov 2006
Location: Dallas, TX
Posts: 2,323
Likes: 0
Received 0 Likes
on
0 Posts
2012 CLS63
Those are really nice man. they do kinda resemble the new 63 wheels but I think the 63 wheels have thinner spokes I think those look more like the S class wheels.. I think. None the less I like the look.
#7
Senior Member
Thread Starter
Join Date: Jun 2003
Location: Houston, TX
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
Senior Member
Thread Starter
Join Date: Jun 2003
Location: Houston, TX
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
I feel like a celebrity now!!
Honestly, I found them the same way - via a Google search. Talked to the guy Mike and he was very helpful and knowledgeable - he even checked with Moven regarding the fitment before he would place the order. Price was even cheaper than eBay.
There does not seem to be any great deterioration in ride quality either. There is a bit more transmission of jolts from a pothole or speedbump but otherwise still very compliant.
Honestly, I found them the same way - via a Google search. Talked to the guy Mike and he was very helpful and knowledgeable - he even checked with Moven regarding the fitment before he would place the order. Price was even cheaper than eBay.
There does not seem to be any great deterioration in ride quality either. There is a bit more transmission of jolts from a pothole or speedbump but otherwise still very compliant.
#10
eclou,
I love your wheels. Exactly the design I would like to get.
I also have same complaint with the 17" wheels that came with my CLK 550 coupe. Way too understated for a car with such performance.
Have you had any previous experience with Moven wheels? How strong are they? And did you lower your car?
I had a terrible experience with BBS RXII wheels that I had installed on my previous Audi A6 2.7T. It bent like crazy and cost me a fortune. That's why I'm asking.
I love your wheels. Exactly the design I would like to get.
I also have same complaint with the 17" wheels that came with my CLK 550 coupe. Way too understated for a car with such performance.
Have you had any previous experience with Moven wheels? How strong are they? And did you lower your car?
I had a terrible experience with BBS RXII wheels that I had installed on my previous Audi A6 2.7T. It bent like crazy and cost me a fortune. That's why I'm asking.
#11
Senior Member
Thread Starter
Join Date: Jun 2003
Location: Houston, TX
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
The Movens are cast - heavy replicas which are close to 30# or more. I am sure they are no where near as strong as a forged wheel. Couple that with a shorter sidewall and you might run into problems with damage. They are cheap enough that a replacement is hardly more than sending it to Wheels America though. I have no prior experience with Moven, and never modded my E55 (my first Merc). The CLK as of today is still on stock springs.
#12
Super Member
Join Date: Aug 2006
Location: NJ,USA
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
'10 c63,'03expedition,ducati999,22'Donzi
i'm going to order the same ones. what size tires did you go with? and did you get your tires through them or somewhere else.
#13
Senior Member
Thread Starter
Join Date: Jun 2003
Location: Houston, TX
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
I picked up some Hankook tires locally off the classifieds here 235/35/19 and 265/30/19. Those appear to be the recommended +2 tire sizes. They fit ok on the wheels - they do appear slightly stretched on the wheels. That makes the lip protector less prominent. Some tires are wider than others of the same size - Bridgestones come to mind.
BTW I ran an R6 almost dead even from 55-120mph or so when I was stock in the TT. Nice bike
BTW I ran an R6 almost dead even from 55-120mph or so when I was stock in the TT. Nice bike
#15
Super Member
Join Date: Aug 2006
Location: NJ,USA
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
'10 c63,'03expedition,ducati999,22'Donzi
hey eclou, did you happen to weigh those moven wheels? i would really like to know how much they weigh prior to ordering them.
#16
Senior Member
Thread Starter
Join Date: Jun 2003
Location: Houston, TX
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
I did not weigh them but the shipping boxes were marked 32# by UPS. Estimate 3-5# for the boxes and the wheels should be just a touch under 30#.
Just as a note the stock lugbolts do not fit. Do not try to use them you will strip out the holes. You need to order 12mm x 1.5 thread pitch 27-29mm thread length with BALL seats. I ordered a set off ebay http://cgi.ebay.com/ebaymotors/ws/eB...4794563&rd=1,1
You cannot use cone seat bolts as you will never get a true torque down on the wheel - very dangerous!!
Just as a note the stock lugbolts do not fit. Do not try to use them you will strip out the holes. You need to order 12mm x 1.5 thread pitch 27-29mm thread length with BALL seats. I ordered a set off ebay http://cgi.ebay.com/ebaymotors/ws/eB...4794563&rd=1,1
You cannot use cone seat bolts as you will never get a true torque down on the wheel - very dangerous!!