Intake hoses
if you want the E55k setup, you'll need...
1. R+L Air Cleaner (airboxes)
2. Y-Section+tubes+bracket
3. Airbox brakets
4. Filter assembly
(I think you might be able to use the stock tubes, or the kevlar tubes).
The whole set-up runs for about $300 ish dollars +/-
As for the Y section modification, you'll need to "cut off" this tab that prevents the Y section to sit on your MAF (its straight forward, you'll know wth i'm talking about once you have the Y-section). Then you'll need a silicone coupler and brackets to "tie" the Y section onto your MAF.
I've gave the k&n and greens so many tries, and no matter what people tell me about it flowing better, i think its BS. I did a testing MY way. I put the k&ns in the car, (w/o telling my father) told him to drive it around the block, then i put the stock ones back, and he did the same. he said the turn (with the stock filters) feels a bit smoother. the turn (with the k&ns) feels a bit sluggish.
and I agree with him, the stock filters makes the car "feel faster/lighter" and even the throttle sound is a bit happier.
I've gave the k&n and greens so many tries, and no matter what people tell me about it flowing better, i think its BS. I did a testing MY way. I put the k&ns in the car, (w/o telling my father) told him to drive it around the block, then i put the stock ones back, and he did the same. he said the turn (with the stock filters) feels a bit smoother. the turn (with the k&ns) feels a bit sluggish.
and I agree with him, the stock filters makes the car "feel faster/lighter" and even the throttle sound is a bit happier.
it's done. I got the kevlar tubes in. perfect fiment on the c55amg airbox.
https://mbworld.org/forums/c32-amg-c...ml#post3363854
The Best of Mercedes & AMG
it's done. I got the kevlar tubes in. perfect fiment on the c55amg airbox.
https://mbworld.org/forums/c32-amg-c...ml#post3363854




Aren't they be bigger than the 350?
Soo from I can rear, the E55 airbox CAN be installed on a C55 or CLK55
Pug and Play (expect the y-pipe MAF part...)?
thanks guys
any NYC LOCALS? with A CLK550 I can "test" fit the hoses?
btw, i have the part numbers, A273 090 01 82 (left) A273 090 00 82 (right)





