Convertible top won't go down
How much would the mercedes house charge to fix this for me?
The Best of Mercedes & AMG
REMEMBER: put the partition i the correct position before taking the top down again!!!!!
'05 CLK500
At the top on each side is a horizontal pin/bearing.
This goes through a tube molded into the partition and into the trunk sidewall.
This acts as the rotation points when the partition is raised/lowered.
I have never seen an intact pin as both mine have sheared off.
Does anyone have a part number for this item?
https://www.parts.com/index.cfm?fuse...iagram=5770930
https://www.parts.com/index.cfm?fuse...iagram=5770930
Sounds like I need to get right diameter material to make a couple of replacement pins with a couple of cotter pin holes in the right spots to secure them in place. I've made my share of parts over the years for MB's out of some strange stuff. Grandpa's Depression Era metal lathe helps, but I don't see needing it for this project. Just the vise and the drill press.
I would appreciate any help with these two things.
Thanks in advance,
nashville_bill
I would appreciate any help with these two things.
Thanks in advance,
nashville_bill
The left side of the partition was not closing off the micro switch and there was obvious play in the pneumatic cartridge. Stabilus 209 690 00 59. RMEuropean seemed to be a good price





