I thought it would be good to have as many part #'s in one thread as we can. This is a list I started making a while back. I obviously don't have everything so please feel free to add whatever you think might be helpful. Hopefully we could make this a "ONE STOP" reference thread. All part #'s were checked, please let me know if any of them do not work.

*MODS, HOW ABOUT AT LEAST ONE STICKY FOR THE W209 FORUM*

1. HOOD EMBLEM 1298880116
2. RAIN SENSOR HOOD GRILLE 2038801905 (PM ME FOR COLOR DETAILS)
3. MB WEDGE (TOOL) 110589035900
4. 3RD BRAKE LIGHT 2098201056
5. LICENSE PLATE LENS 2308200166
6. G. DAIMLER LABEL 06-10 (CLEAR) 0045847338
7. GRILLE STAR 2158880186
8. GRILLE STAR (DISTRONIC) 2158880086
9. JACK PAD 2039970186
10. TRUNK BUMPERS (INSIDE LID) 2037500097
11. TRUNK STAR EMBLEM 2097580058
12. TRUNK LID LOCK 1717500085
13. PRE-FACELIFT AMG BUMPER FRAME 2098850065
14. 05 CLK 55 REAR BUMPER CUT-OUT 2098854025
15. C55 SPARE TIRE WELL 209 610 05 75
16. WIPERS (PAIR) 2038201845

• W204 C-CLASS TIPS

1. LFT TIP 2044906327
2. RT TIP 2044906427

• 06 E55 AIRBOX CONVERSION

1. ENGINE COVER 1130100967
2. LFT AIR INLET 1130942282
3. RT AIR INLET 1130942182
4. KEVLAR INLET LFT 2730900182
5. KEVLAR INLET RT 2730900082
6. LFT AIR CLEANER 1130900501
7. RT AIR CLEANER 1130900601
8. REAR INTAKE ASSY 1130900129

• 03-05 FRONT FENDER LINER/SHEILD

1. DRIVER 2098840322
2. PASSENGER 2098840422

• 06-09 FRONT FENDER LINER/SHEILD

1. DRIVER 2098841322
2. PASSENGER 2098841422

• 03-05 COMPLETE GRILLE ASSY 4 SLAT

1. W/ DIST BLACK 20988003839040
2. W/ DIST GRAY 20988003837246
3. W/O DIST BLACK 20988001839040
4. W/O DIST GRAY 20988001237246

• 06-09 COMPLETE GRILLE ASSY 3 SLAT

1. W/ DIST BLACK 20988202239040
2. W/ DIST GRAY 20988002237246
3. W/O DIST BLACK 20988001239040
4. W/O DIST GRAY 20988001237246

• 03-05 AMG FRONT BUMPER GRILLES

1. CENTER GRILLE 2098850053
2. LFT GRILLE 2098850153
3. RT GRILLE 2098850253
4. CLIPS FOR GRILLES 0029885181

• 06-09 AMG FRONT BUMPER GRILLES

1. CENTER GRILLE 2098850553
2. LFT GRILLE 2098850353
3. RT GRILLE 2098850453
4. CLIPS FOR GRILLES 0039947945

• 03-05 AMG FOG LIGHT ASSY

1. LFT 2308200356
2. RT 2308200456

• 06-09 AMG FOG LIGHT ASSY

1. LFT 2098200756
2. RT 2098200856

• AMG SPORT PEDALS

1. GAS 1703000004
2. BRAKE PEDAL 1702900182
3. PARKING BRAKE 2034300084

• SPRING PADS

1. 5MM 2103250184
2. 9MM
3. 13MM
4. 17MM

• MIRROR TURN SIGNALS

1. LFT 2308200721
2. RT 2308200821

• 06-09 TAIL LIGHTS ELEGANCE

1. LFT 2098201364
2. RT 2098201464

• 06-09 TAIL LIGHTS AVANTGARDE

1. LFT 2098201564
2. RT 2098201664

• HEADLIGHT REPAIR KIT

1. LFT 2098201114
2. RT 2098201214

• CLK 63 BLACK SERIES

1. FRONT SWAY BAR 2093200410
2. REAR SWAY BAR 2093260365
3. REAR SWAY BUSHINGS 2033260881
4. FRONT STRUT BRACE 2093250165
5. REAR STRUT BRACE 2093200190
6. FRONT CALIPER LFT 0034206783
7. FRONT CALIPER RT 0034206883
8. REAR CALIPER LFT 0034202983
9. REAR CALIPER RT 0034203083
10. FRONT ROTOR 2094210112
11. REAR ROTOR 1714230212
12. BRAKE PADS FRONT 0054203920
13. BRAKE PADS REAR 0054204120
14. SPOILER 2097900588

• CLK63

1. DOOR SILL LFT 20968009359B51
2. DOOR SILL RT 20968006359B51
3. SPARE TIRE WELL 2096100575
4. REAR BUMPER CUT-OUT 2098856125
5. REAR SHOCK 2033264400
6. FRONT SHOCK 2093203730
7. HEADER LFT 1561400109
8. HEADER RT 1561400009
   

FRONT STRUT BRACE 2093250165
bolt on?

i think a bit of cutting of the fire wall is required....i remember fastdonzi telling me...

fastdonzi was going to install Ghostrider/VIPclk320's strut brace. This one is from the BS. It shouldn't be that difficult to fit.

did you installed one already on your car wes ?

Andy

Not yet, but it's coming soon..

man I wonders where are those 3 bolts mounted to on each side ? like above the strut or some ? If you going to install dont forget to take pics Wes.

Andy

They need to be drilled. The BS has the holes already but we would need to drill them...

Damn nice list man thats deff a big help, thanks for posting that up. I to am curious about the front strut bar...its just a matter of drilling 3 holes in the strut tower looks like i wonder how much that will improve handling by if one already has shocks springs sways,,just out of curiosity i currently have the hr sway only on the rear and stock on the front i need to get the front one anyway if the hr is 26mm up front how thick is the bs sway in the front i couldnt find to much info on it, and also how thick is the rear compared to the hr, im assuming this is a direct fit? ..thanks

The front and rear sways should be a direct fit. I am getting them installed on the car as we speak so I will report back if there is any problems. As far as the size, I couldn't get any info on the BS sways but they looked to be the same size as H&R's when I compared them. For $192 plus shipping for front and rear you can't go wrong! As for the front strut bar it looks like it's just the three holes that need to be drilled.

$600 for the front strut bar. this really is the only option we have.

Unfortunately yes. Either that or have one custom made.

thats not bad. hope to see pics of your f.s.b when installed.

i was also wondering if anybody has installed the C55 spare tire well? i converted my exhaust to dual oval tips but would like to maybe have it done again if i can make more room down there for some different type of muffler work.

That's probably going to be my next mod. C55 spare tire well, Y pipe to 2 Magnaflow mufflers with dual tips and VIS CF diffuser. Haven't decided on either AMG tips or the ones I posted above from the w204's which look the same minus the AMG. For $58 a pop you can't go wrong. Some pics of the tips installed on a w204.

damn thats crazy 75 dollars for the front sway bar and its the same size as the hr which is 300 dollars so basically a savings of 225 dollars, i would imagine the build quality is the same as the hr, so i shouldnt see any difference if i had the bs front sway and hr rear sway, as opposed to hr front and rear. Dynomite, are you upgrading from your stock sways or are you upgrading from eibach or hr? and once you finish the installation please let us know what difference it made...Thanks

oh i forgot to mention were you not able to find the pn for the front bushings thats why you didnt post it because you posted it for the rear ?

The front BS sway bar comes with the bushing already. The BS sway's are made by Eibach and the quality should be the same as the H&R's. I have called Eibach several times to try and get more info on these but they aren't very helpful. I had the H&R's installed but I sold them..

oh ok i got you because i found some other post by somebody who said you needed two boots which i assumed where bushings thats why i asked, just out of curiosity you said you had the hr and you sold them for these...if you dont mind me asking what was wrong with the hr you didn like them ?.. sorry for all the questions but i was just ready to order the hr and now i changed my mind i want to make sure i dont make a mistake

I ended up ordering all the parts listed in that other thread, but when they arrived I realized you didn't need the "boot" for the front. It comes with them already.

I had a problem with a knocking noise coming from my front right wheel area. My mechanic at the time said it was a problem with the H&R bushings so I took them off. I ended up finding a MUCH better mechanic and he said the problem with the knocking was the upper front strut mounts. The problem had nothing to do with the H&R's. I already had them off the car so I decided to sell them and get these.

ohhh i got you i have the same problem but my knocking/thumping noise sounds like its coming from the rear, although i should prob change my fronts because wheni installed the shocks/springs i used the same mounts because they looked to be ok. so Dynomite let us know what difference you feel and if its worth to save and go with these as opposed to hr. Thanks alot man

Will post back hopefully this week

im thinking of doing the strut brace front and rear..i need to seriuosly stiffen up my car i feel like my car is extremely stiff the shocks springs and rear sway but i dont know why my rear end kinda slides out at a high speed curve in the road at first i was thinking maybe because my rear is to stiff and my front to soft since i have stock sway and maybe i need some stickier tires..i just have this knocking thumping noise from the rear suspension which is driving me nuts i cant figure it out. maybe this will make my car a different beast

Maybe, but it's going to cost some $$ to find out. Your looking at $1k plus shipping...You might want to start with the sway bar first and see if that makes a difference.

true im gonna start with the front sway and see if that does the trick and move on the the strut brace..thanks man.

NP