Dynomite's Dual Exhaust Thread
Thread Starter
Out Of Control!!
Joined: Apr 2008
Posts: 10,275
Likes: 10
From: Jerzy
04 CLK 320 > CLK32K
Dynomite's Dual Exhaust Thread
As some of you know I am in the process of switching to a dual exhaust on my CLK320. I have already switched the rear sway bar to the CLK BS sway, and also switched the spare wheel well to the center positioned CLK55/CLK63/C55 well.
I finally found a reputable exhaust shop to do my work. They took the measurements for the mufflers and recommended I go with Magnaflow part # 11148. He was able to install the Magnaflow X-pipe with 2.5" SS tubing. He did a great job with the bends and the welding is spot on! Parts and Labor came out to $230 for this job, which IMO is not bad at all. Now I just need to wait for the 2 Magnaflow mufflers and the Heat Shield to arrive.
Below I listed the parts and part #'s needed to make this possible. Also some pictures of the progress so far (Crappy iPhone). Hopefully it will be done in the next week.
BTW: Those tips of pipe pointing down at the end are there just to aim the sound away while I drove it home. They will be removed once I get the muffler.
CLK BS rear sway 209 326 03 65
CLK55/CLk63/C55 spare wheel well 209 610 05 75
Heat Shield Left 209 680 00 22 (Already on the car)
Heat Shield Right 203 682 46 71
Hexagon Nut w/ Collar (Qty. 3) 210 990 0150
Bolt (Qty. 8) 210 990 00 04
I finally found a reputable exhaust shop to do my work. They took the measurements for the mufflers and recommended I go with Magnaflow part # 11148. He was able to install the Magnaflow X-pipe with 2.5" SS tubing. He did a great job with the bends and the welding is spot on! Parts and Labor came out to $230 for this job, which IMO is not bad at all. Now I just need to wait for the 2 Magnaflow mufflers and the Heat Shield to arrive.
Below I listed the parts and part #'s needed to make this possible. Also some pictures of the progress so far (Crappy iPhone). Hopefully it will be done in the next week.
BTW: Those tips of pipe pointing down at the end are there just to aim the sound away while I drove it home. They will be removed once I get the muffler.
CLK BS rear sway 209 326 03 65
CLK55/CLk63/C55 spare wheel well 209 610 05 75
Heat Shield Left 209 680 00 22 (Already on the car)
Heat Shield Right 203 682 46 71
Hexagon Nut w/ Collar (Qty. 3) 210 990 0150
Bolt (Qty. 8) 210 990 00 04
Last edited by dynomite05; Oct 20, 2010 at 05:54 PM.
Member
Joined: Oct 2010
Posts: 150
Likes: 0
hi, i am new to the site. i just got a 2008 clk350 and i want to do the same. where did you get the work done? $230 for parts and labor? wow that is really low. i talked to the guy at the parts department at the dealership and he said it is complicated to do the dual exhaust and will cost over $5,000 in parts and labor. is there any complications for your mod?
Last edited by 08clk350; Oct 20, 2010 at 06:00 PM. Reason: add more
MBWorld Fanatic!
Joined: Jun 2010
Posts: 1,368
Likes: 3
From: Mesa, AZ
2011 E550 Sedan
hi, i am new to the site. i just got a 2008 clk350 and i want to do the same. where did you get the work done? $230 for parts and labor? wow that is really low. i talked to the guy at the parts department at the dealership and he said it is complicated to do the dual exhaust and will cost over $5,000 in parts and labor. is there any complications for your mod?
)
Thread Starter
Out Of Control!!
Joined: Apr 2008
Posts: 10,275
Likes: 10
From: Jerzy
04 CLK 320 > CLK32K
hi, i am new to the site. i just got a 2008 clk350 and i want to do the same. where did you get the work done? $230 for parts and labor? wow that is really low. i talked to the guy at the parts department at the dealership and he said it is complicated to do the dual exhaust and will cost over $5,000 in parts and labor. is there any complications for your mod?
Hello and Welcome. The prices you were quoted were probably for OEM parts through the dealer. I bought the OEM parts through parts.com which is much cheaper. The $230 was just for the piping and installing the X-pipe. That doesn't include the labor it will cost to install the mufflers which shouldn't be more than $150. This mod has given me a hard time only because I haven't had anyone to reference off of. As far as I know member PTE and I are the only ones to have tried it and neither of us is done yet. I will get the details for everything when I get home and post all the prices.
Last edited by dynomite05; Oct 20, 2010 at 07:53 PM.
Trending Topics
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Member
Joined: Oct 2010
Posts: 150
Likes: 0
thanks for your reply, cant wait to get all that info...I recently bought a 2008 clk350 and live in LA/Orange County Area. I am looking into doing a few mods to the car, can anyone help me? I been talking to a few people and all I been getting is negative comments like...modifying the engine, lighting, and exhaust of the car will cause the computer to signal failing of the engine or lighting, depending on what mods I have done. Anyways, here is what I want to do...
1. 19" rims
2. AMG rear spoiler
3. dual exhaust system
4. mod the ecu to gain hp
5. all around body kit (preferably add-on)
Any help would be appreciated. Thanks!
1. 19" rims
2. AMG rear spoiler
3. dual exhaust system
4. mod the ecu to gain hp
5. all around body kit (preferably add-on)
Any help would be appreciated. Thanks!
MBWorld Fanatic!
Joined: Jun 2010
Posts: 1,368
Likes: 3
From: Mesa, AZ
2011 E550 Sedan
thanks for your reply, cant wait to get all that info...I recently bought a 2008 clk350 and live in LA/Orange County Area. I am looking into doing a few mods to the car, can anyone help me? I been talking to a few people and all I been getting is negative comments like...modifying the engine, lighting, and exhaust of the car will cause the computer to signal failing of the engine or lighting, depending on what mods I have done. Anyways, here is what I want to do...
1. 19" rims
2. AMG rear spoiler
3. dual exhaust system
4. mod the ecu to gain hp
5. all around body kit (preferably add-on)
Any help would be appreciated. Thanks!
1. 19" rims
2. AMG rear spoiler
3. dual exhaust system
4. mod the ecu to gain hp
5. all around body kit (preferably add-on)
Any help would be appreciated. Thanks!
Thread Starter
Out Of Control!!
Joined: Apr 2008
Posts: 10,275
Likes: 10
From: Jerzy
04 CLK 320 > CLK32K
Yea, I can't wait until it's finished. With this I should be done with my exterior modding. On to the interior...lol
thanks for your reply, cant wait to get all that info...I recently bought a 2008 clk350 and live in LA/Orange County Area. I am looking into doing a few mods to the car, can anyone help me? I been talking to a few people and all I been getting is negative comments like...modifying the engine, lighting, and exhaust of the car will cause the computer to signal failing of the engine or lighting, depending on what mods I have done. Anyways, here is what I want to do...
1. 19" rims
2. AMG rear spoiler
3. dual exhaust system
4. mod the ecu to gain hp
5. all around body kit (preferably add-on)
Any help would be appreciated. Thanks!
1. 19" rims
2. AMG rear spoiler
3. dual exhaust system
4. mod the ecu to gain hp
5. all around body kit (preferably add-on)
Any help would be appreciated. Thanks!
I have an OEM AMG spoiler for sale. What color is your car? Don't worry about those negative people. You are in the right place now.
Last edited by dynomite05; Oct 20, 2010 at 06:58 PM.
MBWorld Fanatic!
Joined: Mar 2008
Posts: 3,632
Likes: 150
C63s Cabriolet, BMW M4, Civic
As some of you know I am in the process of switching to a dual exhaust on my CLK320. I have already switched the rear sway bar to the CLK BS sway, and also switched the spare wheel well to the center positioned CLK55/CLK63/C55 well.
I finally found a reputable exhaust shop to do my work. They took the measurements for the mufflers and recommended I go with Magnaflow part # 11148. He was able to install the Magnaflow X-pipe with 2.5" SS tubing. He did a great job with the bends and the welding is spot on! Parts and Labor came out to $230 for this job, which IMO is not bad at all. Now I just need to wait for the 2 Magnaflow mufflers and the Heat Shield to arrive.
Below I listed the parts and part #'s needed to make this possible. Also some pictures of the progress so far (Crappy iPhone). Hopefully it will be done in the next week.
BTW: Those tips of pipe pointing down at the end are there just to aim the sound away while I drove it home. They will be removed once I get the muffler.
CLK BS rear sway 209 326 03 65
CLK55/CLk63/C55 spare wheel well 209 610 05 75
Heat Shield Left 209 680 00 22 (Already on the car)
Heat Shield Right 203 682 46 71
Hexagon Nut w/ Collar (Qty. 3) 210 990 0150
Bolt (Qty. 8) 210 990 00 04
I finally found a reputable exhaust shop to do my work. They took the measurements for the mufflers and recommended I go with Magnaflow part # 11148. He was able to install the Magnaflow X-pipe with 2.5" SS tubing. He did a great job with the bends and the welding is spot on! Parts and Labor came out to $230 for this job, which IMO is not bad at all. Now I just need to wait for the 2 Magnaflow mufflers and the Heat Shield to arrive.
Below I listed the parts and part #'s needed to make this possible. Also some pictures of the progress so far (Crappy iPhone). Hopefully it will be done in the next week.
BTW: Those tips of pipe pointing down at the end are there just to aim the sound away while I drove it home. They will be removed once I get the muffler.
CLK BS rear sway 209 326 03 65
CLK55/CLk63/C55 spare wheel well 209 610 05 75
Heat Shield Left 209 680 00 22 (Already on the car)
Heat Shield Right 203 682 46 71
Hexagon Nut w/ Collar (Qty. 3) 210 990 0150
Bolt (Qty. 8) 210 990 00 04
What kind of suspension do you have? I never seen a shock designed to mounted upside down like that. I know it can only mounted one way. Usually, the housing of the shock is on the bottom.
MBWorld Fanatic!
Joined: Jun 2010
Posts: 1,368
Likes: 3
From: Mesa, AZ
2011 E550 Sedan
MBWorld Fanatic!
Joined: Jul 2010
Posts: 4,748
Likes: 0
From: A Canadian in Dubai, United Arab Emirates
'05 C200K SS, '05 Kleemann CLK500K, '08 Hummer H3 & '92 Z34 5sp (track car in Canada)
So far so good mate, nice to see you've used an x-pipe as well. Looking forward to more pics.
Thread Starter
Out Of Control!!
Joined: Apr 2008
Posts: 10,275
Likes: 10
From: Jerzy
04 CLK 320 > CLK32K
lol, I was thinking about it....Too much work though 
I'm on PSS9's COs.
I'm on PSS9's COs.
Super Member
Joined: May 2010
Posts: 620
Likes: 1
From: South Florida/New Jersey
2009 blk/blk C63 AMG, 2010 wht/blk c300 sport, 06 c280, 12 Triumph Daytona 675R wht/blk/red
thanks for your reply, cant wait to get all that info...I recently bought a 2008 clk350 and live in LA/Orange County Area. I am looking into doing a few mods to the car, can anyone help me? I been talking to a few people and all I been getting is negative comments like...modifying the engine, lighting, and exhaust of the car will cause the computer to signal failing of the engine or lighting, depending on what mods I have done. Anyways, here is what I want to do...
1. 19" rims
2. AMG rear spoiler
3. dual exhaust system
4. mod the ecu to gain hp
5. all around body kit (preferably add-on)
Any help would be appreciated. Thanks!
1. 19" rims
2. AMG rear spoiler
3. dual exhaust system
4. mod the ecu to gain hp
5. all around body kit (preferably add-on)
Any help would be appreciated. Thanks!
