Headlight fitments question.
#29
Senior Member
Join Date: Feb 2002
Location: Northern Virginia
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
05 CLK500; 07 Volvo XC90
#30
Senior Member
Join Date: Feb 2002
Location: Northern Virginia
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
05 CLK500; 07 Volvo XC90
Got both lights in today. A total surprise because they are from different sellers. One of them looks perfect. All the mounting tabs are original and the lens is clean/scratchless. The other one has the top tab fixed. It looks pretty good as far as I could tell.
One does not have the rubber piece (seal?) going around the entire housing. So my question is whether I could take that piece off my existing light and put it on the new light .. or is it HID specific "seal." If it is not interchangeable, can I get the rubber piece from the dealer?
Cannot wait to install. Might have to wait until it is warmer or bite the bullet and have a shop do the install.
Decision decision
One does not have the rubber piece (seal?) going around the entire housing. So my question is whether I could take that piece off my existing light and put it on the new light .. or is it HID specific "seal." If it is not interchangeable, can I get the rubber piece from the dealer?
Cannot wait to install. Might have to wait until it is warmer or bite the bullet and have a shop do the install.
Decision decision
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#31
Junior Member
Join Date: Aug 2008
Location: Delaware Ohio
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
'06 CLK500 '10 C63
One does not have the rubber piece (seal?) going around the entire housing. So my question is whether I could take that piece off my existing light and put it on the new light .. or is it HID specific "seal." If it is not interchangeable, can I get the rubber piece from the dealer?
#33
MBWorld Fanatic!
Thread Starter
Got the bi xenons today
I noticed they dont have the rubber seal on them but i will just use the ones from the headlights have.
Also i will get some headlight restoration work done on them. They have some salt on the lenses...
![](http://img641.imageshack.us/img641/1397/img0958ao.jpg)
Now the high beam on this ones how would it work? Would i need rewiring or will it just work with the stock plug from my car?
Is the high beam xenon??
Also Dyno have you talked to your guy about painting your headlights black like Gary's?
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Also i will get some headlight restoration work done on them. They have some salt on the lenses...
![](http://img641.imageshack.us/img641/1397/img0958ao.jpg)
Now the high beam on this ones how would it work? Would i need rewiring or will it just work with the stock plug from my car?
Is the high beam xenon??
Also Dyno have you talked to your guy about painting your headlights black like Gary's?
#34
MBWorld Fanatic!
Join Date: Jun 2010
Location: Mesa, AZ
Posts: 1,368
Likes: 0
Received 3 Likes
on
3 Posts
2011 E550 Sedan
Got the bi xenons today
I noticed they dont have the rubber seal on them but i will just use the ones from the headlights have.
Also i will get some headlight restoration work done on them. They have some salt on the lenses...
![](http://img641.imageshack.us/img641/1397/img0958ao.jpg)
Now the high beam on this ones how would it work? Would i need rewiring or will it just work with the stock plug from my car?
Is the high beam xenon??
Also Dyno have you talked to your guy about painting your headlights black like Gary's?
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Also i will get some headlight restoration work done on them. They have some salt on the lenses...
![](http://img641.imageshack.us/img641/1397/img0958ao.jpg)
Now the high beam on this ones how would it work? Would i need rewiring or will it just work with the stock plug from my car?
Is the high beam xenon??
Also Dyno have you talked to your guy about painting your headlights black like Gary's?
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
and No , the high beam isn't xenon.. however u can always change it to xenon
#36
Out Of Control!!
Join Date: Apr 2008
Location: Jerzy
Posts: 10,275
Likes: 0
Received 9 Likes
on
9 Posts
04 CLK 320 > CLK32K
Got the bi xenons today
I noticed they dont have the rubber seal on them but i will just use the ones from the headlights have.
Also i will get some headlight restoration work done on them. They have some salt on the lenses...
Now the high beam on this ones how would it work? Would i need rewiring or will it just work with the stock plug from my car?
Is the high beam xenon??
Also Dyno have you talked to your guy about painting your headlights black like Gary's?
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Also i will get some headlight restoration work done on them. They have some salt on the lenses...
Now the high beam on this ones how would it work? Would i need rewiring or will it just work with the stock plug from my car?
Is the high beam xenon??
Also Dyno have you talked to your guy about painting your headlights black like Gary's?
They look good, and after some work they will be even better. Not sure about the high beam, never really use it. Besides the xenon=present code, everything else is plug and play. I haven't talked to my guy cuz I'm waiting on Badblack to find out about his guy. lol. I will ask tomorrow though.
#38
MBWorld Fanatic!
Thread Starter
Ok thats good to know.
Tell blackbenz to hurry up lol. I was thinking to get them painted first than put them on unless i find someone trusted in my area. As i see it is not an easy task and i cant afford to mess this lights up...
Tell blackbenz to hurry up lol. I was thinking to get them painted first than put them on unless i find someone trusted in my area. As i see it is not an easy task and i cant afford to mess this lights up...
#39
Senior Member
Join Date: Feb 2002
Location: Northern Virginia
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
05 CLK500; 07 Volvo XC90
I have decided to 'bite the bullet' and have the professional installed them. It comes out to $180.00. They called this evening and said it is done. However I don't have transport to pick my car up tonight so will have to bump a ride tomorrow to pick it up. Will try to post pic soon. Cannot wait ...
#41
Senior Member
Join Date: Feb 2002
Location: Northern Virginia
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
05 CLK500; 07 Volvo XC90
#44
Junior Member
Join Date: Aug 2008
Location: Delaware Ohio
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
'06 CLK500 '10 C63
$180 is a bargain. In fact after I did mine I installed 3 sets for others for $350 and $400 without setting the diagnostic. Good thing I don't have time to do this anymore. However I do still have a set of the '06 and up xenon for the CLK. I put the older style in my car. Offers pm me.
#45
MBWorld Fanatic!
Thread Starter
350 to install the headlights?? Wow i would never come to you haha.
Most of the members in here would buy the bixenons from you if your price is reasonable.
I asked the guy today to restore my headlights and he said he rather have them on the car before he does it since it would be easier for him.
Gonna leave an appointment with the body shop to get this bad boys on. I guess painting them will have to wait unless Dyno gives me good news today lol
Most of the members in here would buy the bixenons from you if your price is reasonable.
I asked the guy today to restore my headlights and he said he rather have them on the car before he does it since it would be easier for him.
Gonna leave an appointment with the body shop to get this bad boys on. I guess painting them will have to wait unless Dyno gives me good news today lol
#46
Junior Member
Join Date: Aug 2008
Location: Delaware Ohio
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
'06 CLK500 '10 C63
Most of the CLK owners in Ohio are afraid to work on their own cars and don't want to pay dealer price. I was quoted "around $2000" by the dealer just to put them in. Otherwise known as "we don't want to do it". The service manager actually sent a guy to me after he saw I had done a couple. Bear in mind this was a year or 2 back. Times have changed a bit and the cars are not worth as much as they used to be.
#48
MBWorld Fanatic!
Thread Starter
Wow dealers in Ohio must be tripping wtf.
i am pretty scared to touch the car myself too.
Every time i hit a bump my wallet feels lighter for some reason lol
i am pretty scared to touch the car myself too.
Every time i hit a bump my wallet feels lighter for some reason lol
#50
Senior Member
Join Date: Feb 2002
Location: Northern Virginia
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
05 CLK500; 07 Volvo XC90
Here they are ...
They also fixed my driver window rattled when slammed close. I thought it was like that since it is a pillarless window. They fixed it and now no more rattle when closing.
They charged me $180 for headlights installed and xenon activation. $60 to fixed the window. They said the window regulator would have cost $500.00.
They also fixed my driver window rattled when slammed close. I thought it was like that since it is a pillarless window. They fixed it and now no more rattle when closing.
They charged me $180 for headlights installed and xenon activation. $60 to fixed the window. They said the window regulator would have cost $500.00.
Last edited by thegeneraltso; 01-20-2011 at 03:31 PM.