CLK-Class (W209) 2003 on: CLK 270 CDI, CLK 200K, CLK 200 CGI, CLK 240, CLK 320, CLK 350, CLK 500, CLK 550 [Coupes & Cabriolets]

Dynavin Navigation for W209

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 05-05-2011, 03:46 PM
  #101  
MBWorld Fanatic!
 
dariusf's Avatar
 
Join Date: May 2009
Location: Chicago (Palos Park)
Posts: 1,000
Received 5 Likes on 4 Posts
2023 CLA 250, 2003 CLK320
Here is a pic of my unit taken by Jeff after it arrived from Germany and before it was shipped to me. Note the orange color of the illumination that should match our Mercedes verses the red on the BMW units and Dinavin website pics.

Old 05-05-2011, 04:23 PM
  #102  
Senior Member
 
dr_npz's Avatar
 
Join Date: Jul 2007
Location: Slovakia
Posts: 409
Likes: 0
Received 0 Likes on 0 Posts
09C63AMG, 03E320
Looks Great !!! Tell me about your plan, are you changing the amp along with the speakers, or just the AMP and cables?

Waiting for your review, i want to buy one of these
Old 05-05-2011, 04:39 PM
  #103  
MBWorld Fanatic!
 
dariusf's Avatar
 
Join Date: May 2009
Location: Chicago (Palos Park)
Posts: 1,000
Received 5 Likes on 4 Posts
2023 CLA 250, 2003 CLK320
Arrow

Originally Posted by dr_npz
Looks Great !!! Tell me about your plan, are you changing the amp along with the speakers, or just the AMP and cables?

Waiting for your review, i want to buy one of these
For now the plan is to change the amp as I can't use the existing Bose amp with its fiber bose connection, and replace it with maybe Alpine PDX-5 (4.1 Class D). I will also need to replace the sub as the Bose one I understand is .5ohm so not usable with normal amp. The other speakers being 2ohm will be drivable fine with the new amp. I will see how the setup sounds and if I don't like it I will then replace all the speakers with something better. The center channel speaker will be disabled as it does not add much and would require another mono amp to drive if I could even run it somehow with the new head unit. Not too clear on that. Anyway I do not need it and will just leave it there idle. I will also leave the existing speaker wires in place and just run the source and power wires to the trunk. I guess the power on one side and audio on the other side of the car to isolate them. Still not sure regarding the ground to avoid any feedback etc.. I'm new to the car audio.

The Dinavin comes with quite a few wires so I have to figure things out. I will spend some time with Jeff identifying the plan of attack and then document the install with lots of pics etc.

I would also like to purchase the PAC interface to retain the staring wheel controls and I'm looking in to the rear camera as well.
Old 05-05-2011, 04:47 PM
  #104  
Out Of Control!!
 
dynomite05's Avatar
 
Join Date: Apr 2008
Location: Jerzy
Posts: 10,275
Likes: 0
Received 9 Likes on 9 Posts
04 CLK 320 > CLK32K
Subscribed. Waiting on a nice write up from you, Darius.
Old 05-05-2011, 04:49 PM
  #105  
MBWorld Fanatic!
 
dariusf's Avatar
 
Join Date: May 2009
Location: Chicago (Palos Park)
Posts: 1,000
Received 5 Likes on 4 Posts
2023 CLA 250, 2003 CLK320
Originally Posted by dynomite05
Subscribed. Waiting on a nice write up from you, Darius.
The pressure is on God I still have to get my summer wheels on... still running on winter.... Man that engine looks awesome, I still need to ready your transplant thread
Old 05-05-2011, 05:14 PM
  #106  
Out Of Control!!
 
dynomite05's Avatar
 
Join Date: Apr 2008
Location: Jerzy
Posts: 10,275
Likes: 0
Received 9 Likes on 9 Posts
04 CLK 320 > CLK32K
Originally Posted by dariusf
The pressure is on God I still have to get my summer wheels on... still running on winter.... Man that engine looks awesome, I still need to ready your transplant thread
Thanks. Looking forward to seeing this Navi installed.
Old 05-05-2011, 07:03 PM
  #107  
MBWorld Fanatic!
 
elijah's Avatar
 
Join Date: Dec 2006
Location: EURO Style
Posts: 1,700
Likes: 0
Received 4 Likes on 4 Posts
Euro Cars Only
It looks real good! I can't wait to see it installed, this is an interesting upgrade
Old 05-05-2011, 07:32 PM
  #108  
Member
 
dopeclk's Avatar
 
Join Date: Oct 2010
Posts: 123
Likes: 0
Received 0 Likes on 0 Posts
2004 CLK 320
I'd like to see the total price of this upgrade, and then see if I pull the trigger on this mod or look around some more.
Old 05-05-2011, 08:32 PM
  #109  
MBWorld Fanatic!
 
dariusf's Avatar
 
Join Date: May 2009
Location: Chicago (Palos Park)
Posts: 1,000
Received 5 Likes on 4 Posts
2023 CLA 250, 2003 CLK320
Originally Posted by dopeclk
I'd like to see the total price of this upgrade, and then see if I pull the trigger on this mod or look around some more.
Well for the price you can't beat it. Jeff will have to give you sales price but it should be less then some of the higher end dual din units that do not fit the cars with out adapters or mods. Adding in the cost of a very good amp ~ $350 plus cables and install that you can do yourself, I think it will not run more then $1200 A bit more if you add the speaker replacement, PAC wheels controls, backup camera etc..

I can't wait to get all the parts and get it installed.
Old 05-05-2011, 09:22 PM
  #110  
MBWorld Fanatic!
 
Mka77's Avatar
 
Join Date: Jun 2009
Location: Witness Protection Program
Posts: 1,314
Likes: 0
Received 1 Like on 1 Post
06 CLK350 -SOLD! 2010 Cadillac SRX Premium Turbo
This is starting to get really good. The unit is a real nice piece.
Old 05-06-2011, 02:45 AM
  #111  
MBWorld Fanatic!
 
Kevwood's Avatar
 
Join Date: Jul 2010
Location: A Canadian in Dubai, United Arab Emirates
Posts: 4,748
Likes: 0
Received 0 Likes on 0 Posts
'05 C200K SS, '05 Kleemann CLK500K, '08 Hummer H3 & '92 Z34 5sp (track car in Canada)
The unit looks really good, excited to see the fitment and some screen shots after install.
Old 05-16-2011, 02:51 AM
  #112  
Super Member
 
fusion2007's Avatar
 
Join Date: May 2006
Location: Saint Louis
Posts: 872
Likes: 0
Received 2 Likes on 1 Post
CLS 63 S AMG , s500,clk550
any developments? hopefully
Old 05-16-2011, 07:19 AM
  #113  
MBWorld Fanatic!
 
dariusf's Avatar
 
Join Date: May 2009
Location: Chicago (Palos Park)
Posts: 1,000
Received 5 Likes on 4 Posts
2023 CLA 250, 2003 CLK320
Was out of town and did not have time to start a new thread. I have most of the details worked out and waiting for parts.
Old 05-17-2011, 01:54 AM
  #114  
Super Member
 
fusion2007's Avatar
 
Join Date: May 2006
Location: Saint Louis
Posts: 872
Likes: 0
Received 2 Likes on 1 Post
CLS 63 S AMG , s500,clk550
awsome!! thanks for starting it, i just saw it
Old 05-24-2011, 07:23 PM
  #115  
MBWorld Fanatic!
 
aznmode's Avatar
 
Join Date: Aug 2007
Location: San Jose, CA
Posts: 1,488
Received 78 Likes on 52 Posts
2010 c300
Hey guys the post facelifted w209 is slightly more narrow than the w203. I bought a comand unit for a w209 last year for my w203 thinking it was exact fit but I ended up with about 1/4 of inch gaps on the sides. Also the mounting holes are off so you cant screw it down. I had sold it to a w209 owner and helped him install it and was a perfect fit on his w209 but not my w203. The OP mentioned it wasn't correct fit and I just wanted to clarify that it's not exact fit. If somoene else mentioned it then sorry for double posting.



back of unit

Last edited by aznmode; 05-24-2011 at 10:52 PM.
Old 05-24-2011, 09:13 PM
  #116  
MBWorld Fanatic!
 
dariusf's Avatar
 
Join Date: May 2009
Location: Chicago (Palos Park)
Posts: 1,000
Received 5 Likes on 4 Posts
2023 CLA 250, 2003 CLK320
I have just traced the opening with the tracing paper and cut out the shape. Placing it on the Dynavin unit that I got looks like a perfect fit.

see the pics of my existing unit and the exact Dynavin model details

https://mbworld.org/forums/clk-class...tallation.html
Old 05-25-2011, 01:33 AM
  #117  
MBWorld Fanatic!
 
Kevwood's Avatar
 
Join Date: Jul 2010
Location: A Canadian in Dubai, United Arab Emirates
Posts: 4,748
Likes: 0
Received 0 Likes on 0 Posts
'05 C200K SS, '05 Kleemann CLK500K, '08 Hummer H3 & '92 Z34 5sp (track car in Canada)
Originally Posted by aznmode
Hey guys the post facelifted w209 is slightly more narrow than the w203. I bought a comand unit for a w209 last year for my w203 thinking it was exact fit but I ended up with about 1/4 of inch gaps on the sides. Also the mounting holes are off so you cant screw it down. I had sold it to a w209 owner and helped him install it and was a perfect fit on his w209 but not my w203. The OP mentioned it wasn't correct fit and I just wanted to clarify that it's not exact fit. If somoene else mentioned it then sorry for double posting.

I've got a 203 and a 209 and I measured the head units out a while ago, you're correct (as your pic clearly shows), the 209 is narrower. This is why the 203 dash kits need to be shaved down to fit the (facelifted) 209.
Old 05-25-2011, 10:00 AM
  #118  
Out Of Control!!
 
dynomite05's Avatar
 
Join Date: Apr 2008
Location: Jerzy
Posts: 10,275
Likes: 0
Received 9 Likes on 9 Posts
04 CLK 320 > CLK32K
Originally Posted by Kevwood
I've got a 203 and a 209 and I measured the head units out a while ago, you're correct (as your pic clearly shows), the 209 is narrower. This is why the 203 dash kits need to be shaved down to fit the (facelifted) 209.

That would explain the problem I'm having with my CF double din.
Old 05-25-2011, 10:07 AM
  #119  
MBWorld Fanatic!
 
Kevwood's Avatar
 
Join Date: Jul 2010
Location: A Canadian in Dubai, United Arab Emirates
Posts: 4,748
Likes: 0
Received 0 Likes on 0 Posts
'05 C200K SS, '05 Kleemann CLK500K, '08 Hummer H3 & '92 Z34 5sp (track car in Canada)
That would be why. I feel bad for not putting a thread up about it when I did the measurments... The good news for 209 owners is that the 203 dash kits work with a little shaving & mods, unfortunately the 203 guys can't use 209 heads.
Old 05-25-2011, 10:59 AM
  #120  
MBWorld Fanatic!
 
dariusf's Avatar
 
Join Date: May 2009
Location: Chicago (Palos Park)
Posts: 1,000
Received 5 Likes on 4 Posts
2023 CLA 250, 2003 CLK320
Originally Posted by Kevwood
That would be why. I feel bad for not putting a thread up about it when I did the measurments... The good news for 209 owners is that the 203 dash kits work with a little shaving & mods, unfortunately the 203 guys can't use 209 heads.
Would be good to get exact measurements for the face lift Dynavin replacements. At least the unit for the pre face lift look like they will fit great. I would assume the newer versions from Dynavin should as well.
Old 05-25-2011, 11:21 AM
  #121  
MBWorld Fanatic!
 
Kevwood's Avatar
 
Join Date: Jul 2010
Location: A Canadian in Dubai, United Arab Emirates
Posts: 4,748
Likes: 0
Received 0 Likes on 0 Posts
'05 C200K SS, '05 Kleemann CLK500K, '08 Hummer H3 & '92 Z34 5sp (track car in Canada)
Originally Posted by dariusf
Would be good to get exact measurements for the face lift Dynavin replacements. At least the unit for the pre face lift look like they will fit great. I would assume the newer versions from Dynavin should as well.
I wrote the numbers down in my mod log book, when I get back to Dubai I'll try to remember to post them this weeked for reference.
Old 05-25-2011, 11:27 AM
  #122  
MBWorld Fanatic!
 
dariusf's Avatar
 
Join Date: May 2009
Location: Chicago (Palos Park)
Posts: 1,000
Received 5 Likes on 4 Posts
2023 CLA 250, 2003 CLK320
Originally Posted by Kevwood
I wrote the numbers down in my mod log book, when I get back to Dubai I'll try to remember to post them this weeked for reference.
I will ask Jeff if he could get technical drownings with exact measurements for both pre and post face lift model replacements.
Old 05-25-2011, 01:35 PM
  #123  
Member
 
Jhuey's Avatar
 
Join Date: Feb 2009
Posts: 150
Likes: 0
Received 0 Likes on 0 Posts
CLK
Hey guys, so I have been in contact with Jeff and it is confirmed the w203 Dynavin will not fit our facelifted w209 and would prob look really bad if you tried. The good news though is there is an amazing electronics guy here in socal that works with all of the Benz dealerships here and is a consultant for pioneer and other electronics brands. He is now working with Dynavin to test and help make sure they are making a quality product that is able to install correctly on the newer benzes. With this I was the one that put them in contact trying to put it in my 2005 clk and Jeff knows there is a demand and is pushing for a facelifted w209 model. So hopefully we can get an easy to install reliable w209 version soon. I will def keep you guys updated and let you know if I find anything. I have already offered my vehicle for testing so if I am needed for the test you guys will be the first to know
Old 05-25-2011, 01:40 PM
  #124  
MBWorld Fanatic!
 
Kevwood's Avatar
 
Join Date: Jul 2010
Location: A Canadian in Dubai, United Arab Emirates
Posts: 4,748
Likes: 0
Received 0 Likes on 0 Posts
'05 C200K SS, '05 Kleemann CLK500K, '08 Hummer H3 & '92 Z34 5sp (track car in Canada)
Nice leg work!
Old 10-12-2011, 07:53 PM
  #125  
Newbie
 
knigs13's Avatar
 
Join Date: Jun 2011
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
2007 C280
I have a w203 c280 and if we could get a group discount I would absolutely be in! I have found them online for 650$ US can anyone find a better price?


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Dynavin Navigation for W209



All times are GMT -4. The time now is 09:57 AM.