Any ECU tuning products that don't involve shipping ECU
01-21-2014, 10:26 PM
#4
SPONSOR
Join Date: Dec 2010
Location: Santa Ana, CA
Posts: 5,696
Received 130 Likes
on
114 Posts
OE Tuning C63 AMG
07-01-2014, 08:41 PM
#6
MBWorld Fanatic!
OE Tuning has flash loaders that install the tune via OBD2 with out removing ECU. Please contact us directly for more information sales@oetuning.com or +1818-574-5075.
Trending Topics
07-02-2014, 07:23 PM
#9
Super Member
07-12-2014, 06:13 PM
#12
Junior Member
Join Date: Jun 2005
Location: NJ
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
CLK 550
I used OE Tuning after I removed my exhaust and replaced it with straight pipes. They shipped me a device that allowed me to take the stock ECU map off my car via the OBDII port. After I sent this file to them via email, they replied and sent me tunes based on octane and one valet tune (limits speed of car). I uploaded these files to the device and then remapped the car myself. It worked well.
Last edited by Mercedes-Benz; 07-15-2014 at 08:35 PM.
07-14-2014, 03:07 AM
#13
MBWorld Fanatic!
I used OE Tuning after I removed my exhaust and replaced it with straight pipes. They shipped me a device that allowed me to take the stock ECU map off my car via the OBDII port. After I sent this file to them via email, they replied and sent me me tunes based on octane and one valet tune (limits speed of car). I uploaded these files to the device and then remapped the car myself. It worked well.
07-15-2014, 08:40 PM
#14
Junior Member
Join Date: Jun 2005
Location: NJ
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
CLK 550
No issues. Yes the maintenance is the same. Just make sure you know if the dealer will reflash for any reason. If so, you will need to replace with your map again. I did not measure any gains. But, noticed things worked better with my exhaust setup which does lower torque in the lower RPM range. With my setup, the car is best when driven above 1900 RPM. I normally shift manually when driving around town. Now, if I could change the shift points for the TCU, that would be great. But, I like manual mode anyway. My setup is great. I am glad I went with the straight pipes!
