Intake Manifold thermo Isolators
12-22-2006, 04:18 PM
#1
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2005
Location: S.E. FLA.
Posts: 1,224
Likes: 0
Received 6 Likes
on
6 Posts
05 ML-500 , 03 CLK5.5 AMG has left the Garage
Intake Manifold thermo Isolators
--------------------------------------------------------------------------------
I made these up this morning. 3/16" ~ .1875 ~ 5.01 MM
Garolite LE / Phenolic Linen & epoxy , Though they would make nice Isolators , to keep the heat from wicking the head to the manifold. Now I have to track down proper longer attachment Hardware. I do not know if there is any use as of yet?? Just an Ideal , When I install them I'll thermo-couple the head & intake. See if there is any benefits. It was under $200.00 to make . Should fit 500 / 5.5 . under a Kleemann or Renntech blower intake.
I made these up this morning. 3/16" ~ .1875 ~ 5.01 MM
Garolite LE / Phenolic Linen & epoxy , Though they would make nice Isolators , to keep the heat from wicking the head to the manifold. Now I have to track down proper longer attachment Hardware. I do not know if there is any use as of yet?? Just an Ideal , When I install them I'll thermo-couple the head & intake. See if there is any benefits. It was under $200.00 to make . Should fit 500 / 5.5 . under a Kleemann or Renntech blower intake.
Last edited by PTE; 06-11-2012 at 06:12 PM.
12-22-2006, 05:18 PM
#2
Member
Join Date: Jan 2006
Location: Florida
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Porsche Cayenne Turbo
--------------------------------------------------------------------------------
I made these up this morning. 3/16" ~ .1875 ~ 5.01 MM
Garolite LE / Phenolic Linen & epoxy , Though they would make nice Isolators , to keep the heat from wicking the head to the manifold. Now I have to track down proper longer attachment Hardware. I do not know if there is any use as of yet?? Just an Ideal , When I install them I'll thermo-couple the head & intake. See if there is any benefits. It was under $200.00 to make . Should fit 500 / 5.5 . under a Kleemann or Renntech blower intake.
I made these up this morning. 3/16" ~ .1875 ~ 5.01 MM
Garolite LE / Phenolic Linen & epoxy , Though they would make nice Isolators , to keep the heat from wicking the head to the manifold. Now I have to track down proper longer attachment Hardware. I do not know if there is any use as of yet?? Just an Ideal , When I install them I'll thermo-couple the head & intake. See if there is any benefits. It was under $200.00 to make . Should fit 500 / 5.5 . under a Kleemann or Renntech blower intake.
I want a pair.
12-23-2006, 09:44 AM
#4
MBWorld Fanatic!
Join Date: Feb 2004
Location: Portsmouth, NH
Posts: 1,559
Likes: 0
Received 0 Likes
on
0 Posts
none
Wow! Thats a great idea. I never thought about heat transfer between intake/combustion parts and their mounting points. Thats awesome, I too want a pair for my collection of parts that I don't install.
01-19-2007, 11:57 AM
#6
MBWorld Fanatic!
Join Date: Feb 2004
Location: Portsmouth, NH
Posts: 1,559
Likes: 0
Received 0 Likes
on
0 Posts
none
Yeah, I was thinking about this post the other day. Any updates??
Once again, I need more yet to be installed parts collecting dust on my parts rack. These would look great next to everything else
Once again, I need more yet to be installed parts collecting dust on my parts rack. These would look great next to everything else
01-19-2007, 12:31 PM
#7
Out Of Control!!
Evosport makes this for $350. Why did you decide to make them so thick PTE? I was just about to order mine through evosport but if you think yours are better I'd rather support an mbworlder.
Trending Topics
01-19-2007, 12:59 PM
#8
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2005
Location: S.E. FLA.
Posts: 1,224
Likes: 0
Received 6 Likes
on
6 Posts
05 ML-500 , 03 CLK5.5 AMG has left the Garage
Thermo spacers
Hi Guys:
The ones that Evosports makes are for MB Compressor Motors, only! They set in a different area. Just go to their site. The ones I'm working on , will work , in conjuntion , with Kleemann & Renntech. and N/a Motors . They will go between the cylinder Head & the intake manifold. Hold on . I've been down with the Flu. for 4 weeks . Blackbenzz , Please E-mail me at tynerfla@bellsouth.net ___PTE___
The ones that Evosports makes are for MB Compressor Motors, only! They set in a different area. Just go to their site. The ones I'm working on , will work , in conjuntion , with Kleemann & Renntech. and N/a Motors . They will go between the cylinder Head & the intake manifold. Hold on . I've been down with the Flu. for 4 weeks . Blackbenzz , Please E-mail me at tynerfla@bellsouth.net ___PTE___
02-07-2007, 07:42 AM
#10
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2005
Location: S.E. FLA.
Posts: 1,224
Likes: 0
Received 6 Likes
on
6 Posts
05 ML-500 , 03 CLK5.5 AMG has left the Garage
Phenloic Spacers
Hi Folks; I've made 4 sets , so far. Delievered 3 sets of them locally. They come with gaskets & longer allen head cap screws. These were hand build by me using the alum template and a router. They came out great! I'm working on a way to up the production level. I've got one more hand cut kit Available. $150.00 delievered. I'm still will honor the past e-mail requests & you to billtc55
02-19-2007, 12:27 PM
#14
MBWorld Fanatic!
Join Date: Jul 2004
Location: Diamond Bar & Anaheim, CA
Posts: 1,194
Likes: 0
Received 2 Likes
on
2 Posts
2003 C-Class Sportcoupe
Hi Guys:
The ones that Evosports makes are for MB Compressor Motors, only! They set in a different area. Just go to their site. The ones I'm working on , will work , in conjuntion , with Kleemann & Renntech. and N/a Motors . They will go between the cylinder Head & the intake manifold. Hold on . I've been down with the Flu. for 4 weeks . Blackbenzz , Please E-mail me at tynerfla@bellsouth.net ___PTE___
The ones that Evosports makes are for MB Compressor Motors, only! They set in a different area. Just go to their site. The ones I'm working on , will work , in conjuntion , with Kleemann & Renntech. and N/a Motors . They will go between the cylinder Head & the intake manifold. Hold on . I've been down with the Flu. for 4 weeks . Blackbenzz , Please E-mail me at tynerfla@bellsouth.net ___PTE___
02-21-2007, 05:02 PM
#15
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2005
Location: S.E. FLA.
Posts: 1,224
Likes: 0
Received 6 Likes
on
6 Posts
05 ML-500 , 03 CLK5.5 AMG has left the Garage
Thermo isolators
I've been asked politely by the administer / management not to post any of this type of threads. They explained that it falls within their guidelines of a commerical post , for sales of products. I accepted their decision , and respected there request. They have pulled the threads I started , in the areas where there are competitive products , Understandibly
I wish to continue to contribute , to these forums. And need not to make much to do over this minor , missunderstanding on my part. I will forefill all requests that where E-mail to my attention. Thanks to all___PTE___
I wish to continue to contribute , to these forums. And need not to make much to do over this minor , missunderstanding on my part. I will forefill all requests that where E-mail to my attention. Thanks to all___PTE___
Last edited by PTE; 02-21-2007 at 05:46 PM.
