2001 CLK55 AMG

HPS GEN 1 Supercharger Kit
-no voltage clamp
-no FMU
-Attwood European Tune
-36lbs@43.5psi injectors
-Port and Bench Flowed Intake Manifold Heat treated

Devils Own Water Methanol Injection
-Dual Nozzle Pre Blower 7 / after Blower 14
-Braided Lines
-Tank Mounted Pump and Tank

Audi Coolant Tank

2005 C55 Calipers Fronts
-Centric Drilled C55 Rotors (made by stoptech)
-Stoptech SS Braied Lines Front and Rear
-Powerslot Rear Rotors Drilled Only
-Blue Brake Fluid

-Seconary Cat Delete
-Muffler Delete
-Resonator Delete
-Straight pipes From Serious Exhaust Products 2.5" X-Pipe to Custom Quad Eisemann Tips
-True Quads (spare Tire Delete)
-MBH Headers Long Tube

Authentic AMG Paddles + -

C63 VIS Front Bumper
w204 OEM Fogs and Grilles
Carbon Fiber Grille
Carbon FIber New Style Mirrors
Carbon FIber c63 bumper side vents
Carbon Fiber antenna
Carbon Fiber VIS Diffuser
Carbon Fiber License Plate Trim
CLK555 Black Badge /black AMG Badge
Black series "L" Badge Customized to say "supercharged" instead of Black Series

HID 4300k Fogs and Headlights
LED Everything
Tinted LED Tail Lights

Have not decided on Wheels yet
car is going to paint next week for a matte red finish (each to there own taste please...)

Future:
Powder Coat Valve Covers
Find or make a nice low profile engine cover

I am probably forgetting alot as there's so much to think of right now looking to finish the car up in the next two weeks:

Sneak Pics and Video: More to Come

Black CLK is not mine but another members who sold me the front bumper special thanks to him for the pics of how similar mine will look...note this bumper requires alot of work to properly fit. If i could do it again i would not buy it. id buy the regular c63 one without side vents from vis and add my own vents...

 

Please excuse the random pics of a red truck i painted and the balance shafts of the ml350...

 

http://www.youtube.com/watch?v=MoJjT...ature=youtu.be

 

looking great

i didnt know mbh makes headers for our cars, how much hp did you pick up?

 

Nice Work Man,Very Clean & NiCe Upgrades

 

Nice list of mods!

 

+1. As far as i know they don't make headers for the 208. Don't know any true long tubes for the 208

 

Headers are technically attwood european but there made by mbh i guess...i will get some pics there true longtube lifetime warranty call Attwood European in Phoenix to purchase ask for andrew

 

i knew mbh made w210 headers for attwood but wasn't aware they had ones for w208. i will give them a call to get more info and pricing, maybe we can setup a group buy here... anyway thx for leading the way, can't wait to see the finished product

 

thats it the w210 headers fit the w208 he modifies something to get it done...I too will call and get more info on what i got....

 

This is sick, can't wait to watch this thread.

 

Nice and siclky, what a machine, I am inpressed.
What Drive ratio are you using? What compression ratio and fuel type?
Pump gas is lousy for blown and turbo engines. I love blowers but octane requirements are always dominant to prevent detonation.
Im all in

Cheers, Gator

 

Any pics of the headers and price?

 

I paid $3000 OUCH! There allready on the car but I will have it back up in the air monday after paint and I will snap some pics...

 

they're same mbh headers for w210, I was told headers were 2600 and additional 350 for something relating to steering. we might get better deal with groupbuy

 

+1 My buddy would join in the group buy, as far as steering yea you have to use a different joint at the rack for the headers to clear....

 

What size primaries and collectors? Can we choose? I'd like to see the design before committing to a group buy.

 

I will get dimensions monday! I wonder if a W204 CF Lip will fit the VIS Bumper, guess we will find out as I ordered one today! Probably going to end up ordering the CF side vents too! I am also going to most likely upgrade my headlights to the ones listed below:
http://www.ebay.com/itm/310362909358...84.m1423.l2649

 

Can you tell us more about the paddle shifters retrofit? I'm especially interested because you managed to keep the stock steering wheel.

 

wow, cars looking great. How did you do the paddle shiftier stepup?

 

there is plenty of info on this in the forum and others, but i had ACG in New York install it for me. you can probably reach out to their San Diego shop to have them work on yours. let me know if you plan to do it yourself i can send you some info.

 

Any update on the headers?

 

Any updated pics? What does the car look like now?