Brighter, Whiter Smile Upfront...
Is the installation hard? Also, what bulbs would I need? I am trying to achieve this kinda look below (see attached pics...)
I would love to change the inner 2 yellow looking lights on my clk55
and the fog lights too so I would be grateful for the information.
Does anyone know if I have to mess around with the system, that is, to
reprogram it so that it knows that the bulbs were changed?
Thanks...
Last edited by clk55fan; Feb 24, 2005 at 11:14 PM.
I would love to change the inner 2 yellow looking lights on my clk55
and the fog lights too so I would be grateful for the information.
Does anyone know if I have to mess around with the system, that is, to
reprogram it so that it knows that the bulbs were changed?
Thanks...


If you haven't already cleared your turn signal indicators (the yellow portion above your main headlights) I also installed the stealth bulbs from this site and am very happy with them:
www.stealthauto.com
http://www.stealthauto.com/Store/Cu...px?CategoryID
The following is from Rob's post and relates to the parking light replacement.:
http://www.superbrightleds.com/BA9S6_specs.htm
BA9s-W4 White LED bulb
BA9s Bayonet base bulb with 4 Super White 3mm LEDs
Available for 6 or 12 Volt AC/DC operation
$ 2.98
*note if you get these bulbs, you will need to file off one of the prongs to make them them fit into the benz housings of the H6W. If you don't, you wil break the housing. (Easy Mod)
I don't have the yellow side marker lights on my front bumper so can't help you out there.
Good luck - and yes I own the car described below - not the green thing depicted in my other post.
The fogs are a different story. You have to get under the corner of the bumper. You will see 3 screws that hold on the splash guard..remove them and the guard will come off. The back of the fog light has a U shaped spring that holds on the back of the fog assembly. snap it into the down position and the back will come off exposing the bulb. To remove it...it is just like the high beam spring(above). It is not hard..just a pain to work (i jacked car up to make easier.
Hope that helps


