Hello all. New owner here. Need some help. Car needs some TLC it sat for a bit. 2008 black series. 16k miles. My observations/questions:
1) car needs an alignment bad. What are the factory alignment, coil over and ride height specs? Curious what the rebound.comp should be also.
can't find these anywhere.
2) strong smell of gas when tank is filled up to full. It goes away after a little driving. Seems to be an issue with many MB from this era.
3) need new tires. What are people putting on these cars?
4) anything top of mind I should
worry about or address?
car is cosmetically great but it’s been sitting. Previous owner should have driven it more thanks!!
1) car needs an alignment bad. What are the factory alignment, coil over and ride height specs? Curious what the rebound.comp should be also.
can't find these anywhere.
2) strong smell of gas when tank is filled up to full. It goes away after a little driving. Seems to be an issue with many MB from this era.
3) need new tires. What are people putting on these cars?
4) anything top of mind I should
worry about or address?
car is cosmetically great but it’s been sitting. Previous owner should have driven it more thanks!!
Hi
1) and 3) some info) on mine I put Michelin PS4s with 295 instead of 285 for the rear wheels
4) The classics : head bolts, Valve lifters, cam adjusters
1) and 3) some info) on mine I put Michelin PS4s with 295 instead of 285 for the rear wheels
4) The classics : head bolts, Valve lifters, cam adjusters
duuder
Member
close
- Join DateAug 2021
- LocationNYC
- Posts:176
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive500E - CLK BS
-
Likes:337
-
Liked:59 Times in 49 Posts
the smell of gas is due to the plastic built housing on the fuel pump sender (driver side), its DIY if you care to do so
sender - 209-470-22-94
updated adapter harness - 211-440-05-07
pump seal - 019-997-23-45-64
sender seal - 211-471-05-79-64
https://mbworld.org/forums/clk63-bla...placement.html
sender - 209-470-22-94
updated adapter harness - 211-440-05-07
pump seal - 019-997-23-45-64
sender seal - 211-471-05-79-64
https://mbworld.org/forums/clk63-bla...placement.html
Currently Active Users (1)



