Aired out on 20x9 20x11s!!!
#1
Junior Member
Thread Starter
Aired out on 20x9 20x11s!!!
Within a month of having the car I've already got new wheels, tires, air suspension obd lowering module, tint, resonator and muffler delete
In these pics she's sitting in the max lowered height (-70mm / 2.75") and it fits PERFECTLY with about 1mm of clearance all the way around. Obviously I can't drive it in this height (have to make sure the wheel is perfectly straight before I can even lower this low lol) but it's strictly for show. I always drive in the factory comfort Airmatic setting, where you can't even feel the fact that it has aftermarket wheels on it, rides as good as it did on the stock 19" Multi-Spoke AMG wheels.
Wheel setup:
Stance SF07 Brushed Gunmetal
Front: Face 1 20x9 ET 25
Rear: Face 3 20x11 ET 38
Tire Sizes: 255/35/20 285/30/20
In these pics she's sitting in the max lowered height (-70mm / 2.75") and it fits PERFECTLY with about 1mm of clearance all the way around. Obviously I can't drive it in this height (have to make sure the wheel is perfectly straight before I can even lower this low lol) but it's strictly for show. I always drive in the factory comfort Airmatic setting, where you can't even feel the fact that it has aftermarket wheels on it, rides as good as it did on the stock 19" Multi-Spoke AMG wheels.
Wheel setup:
Stance SF07 Brushed Gunmetal
Front: Face 1 20x9 ET 25
Rear: Face 3 20x11 ET 38
Tire Sizes: 255/35/20 285/30/20
The following 2 users liked this post by JDMSteven:
Dblok1113 (10-06-2020),
hyperion667 (10-16-2020)
#2
Looks good JDM what's your IG again? I'm tunedmercedes
The following users liked this post:
Dblok1113 (10-06-2020)
The following 2 users liked this post by JDMSteven:
cls5504matic (10-06-2020),
Dblok1113 (10-06-2020)
#4
Super Member
I actually thought of doing that haha. Not for fun, but to generate a decent following and for cashflow reasoning or some vendors will offer steep discounts on your build lol. But I gave it up. I'll follow you guys on IG too haha. Mine is Roop_550
The following users liked this post:
Dblok1113 (10-06-2020)
#5
I absolutely love the look of this ! Nice job ! I’m done under the hood until next year so I’m going to work or making mine nicer visually. Well done sir ! I’m Going to be following as well @slidinstuttgart
#6
Super Member
Did any of your guys' B pillar black panel go bad? Mine started to shed the clear coat and I applied the 3M vinyl wrap...it got bubbles now :/ lol should I have it replaced or get it wrapped professionally? That's the only flaw that mine has. It saddens me.
The following users liked this post:
Dblok1113 (10-06-2020)
#7
Oh yea, that ride looks pretty neat. I wish I ran 11s in the back. I was told by almost everyone that they won't fit and will rub. Dammit. lol
Did any of your guys' B pillar black panel go bad? Mine started to shed the clear coat and I applied the 3M vinyl wrap...it got bubbles now :/ lol should I have it replaced or get it wrapped professionally? That's the only flaw that mine has. It saddens me.
Did any of your guys' B pillar black panel go bad? Mine started to shed the clear coat and I applied the 3M vinyl wrap...it got bubbles now :/ lol should I have it replaced or get it wrapped professionally? That's the only flaw that mine has. It saddens me.
Trending Topics
#8
Super Member
And I think we should create a Group Chat on IG for quick questions/topics/updates...wdys?
The following users liked this post:
Dblok1113 (10-06-2020)
#10
Yeah, I think I have that thread bookmarked. But just didn't want to spend almost $100 for both pillars haha. I was just looking for a cheap way out. It does look pretty good and stock-form with the wrap, but it's starting to bubble up.
And I think we should create a Group Chat on IG for quick questions/topics/updates...wdys?
And I think we should create a Group Chat on IG for quick questions/topics/updates...wdys?
The look was pissing me off and the ebay one was too bulky.
The following users liked this post:
Dblok1113 (10-07-2020)
#12
would love to see how that’s done ! I’ll research that at lunch and I think I’m going to buy new ones.
Now that I’m done Under the hood for a little I’m going to start making mine look nicer. I absolutely love the look of this car. I gotta fix my air suspension and then I’m going to buy the lowering module. I also gotta figure out spacers for my wheels, I love my amg wheels would love for them to stick out more flush
Now that I’m done Under the hood for a little I’m going to start making mine look nicer. I absolutely love the look of this car. I gotta fix my air suspension and then I’m going to buy the lowering module. I also gotta figure out spacers for my wheels, I love my amg wheels would love for them to stick out more flush
#13
#14
I hear u sir. I dont let anyone wash my car. Just me two buckets or a foam cannon. Dryed with leaf thing and microfiber in one direction.
The following users liked this post:
Dblok1113 (10-07-2020)
#15
Last edited by Suppaa Mario; 10-07-2020 at 02:53 PM.
The following users liked this post:
Dblok1113 (10-07-2020)
#16
Yeah I learned my lesson too, anyhow, dblok I can do it for you. Replacing the pillars is 1 out of 5 on the difficulty level. Two torq screws, you can pull the pillar from the button and peel it upwards to access them. I Love my lowering module, I have it custom set to - 34mm front and - 32 back.
#17
Junior Member
Thread Starter
Thanks for all the love everyone! I have made an IG for my car stuff, @BGDBZ, feel free to follow there. As far as the side pillar stuff... my car was garage kept it's entire life and it all looks perfect still. Surprising given that its a Florida car but I can't complain!
The following users liked this post:
Dblok1113 (10-08-2020)
#18
Looking clean bro! Those wheels go really well against the white! I just got the mufflers cut with quad amg tips and cf diffuser put on today. And new 20” wheels should be here any day!
The following users liked this post:
Dblok1113 (10-09-2020)
#20
I’ve got a group on fb with like 7 members. It would just be like us talking on it. Ha!
Facebook.com/groups/tunedmercedes
Facebook.com/groups/tunedmercedes
#21
#24
MBWorld God!
Join Date: Jul 2010
Location: on my way
Posts: 30,660
Received 3,400 Likes
on
2,845 Posts
2012 CLS63
My 2012 also suffers from the B pillar fail....only on one side though LOL! Luckily it's on the passengers side.